References
- Antunes, P. V., A. Ramalho, and E. V. P. Carrilho. 2014. Mechanical and wear behaviours of nano and micro filled polymeric composite: Effect of filler fraction and size. Materials & Design 61:50–60. doi: https://doi.org/10.1016/j.matdes.2014.04.056.
- Arulmurugan, M., K. Prabu, G. Rajamurugan, and A. S. Selvakumar. 2021. Viscoelastic behaviour of aloevera/hemp/flax sandwich laminate composite reinforced with BaSO4: Dynamic mechanical analysis. Journal of Industrial Textiles 50 (7):1040–64. doi: https://doi.org/10.1177/1528083719852312.
- Arulmurugan, M., A. S. Selvakumar, K. Prabu, and G. Rajamurugan. 2020. Effect of barium sulphate on mechanical, DMA, and thermal behaviour of woven aloevera/flax hybrid composites. Bulletin of Materials Science 43 (1):1–10. doi: https://doi.org/10.1007/s12034-019-2018-7.
- Assarar, M., D. Scida, A. El Mahi, C. Poilâne, and R. Ayad. 2011. Influence of water aging on mechanical properties and damage events of two reinforced composite materials: Flax-fibers and glass-fibers. Materials and Design. 32 (2):788–95. doi: https://doi.org/10.1016/j.matdes.2010.07.024.
- Baheti, V., J. Militky, R. Mishra, and B. K. Behera. 2016. Thermomechanical properties of glass fabric/epoxy composites filled with fly ash. Composites Part B Engineering. 85:268e276. doi: https://doi.org/10.1016/j.compositesb.2015.09.049.
- Bajpai, P. K., and I. Singh. 2013. Drilling behavior of sisal fiber-reinforced polypropylene composite laminates. Journal of Reinforced Plastics and Composites 32 (20):1569–76. doi: https://doi.org/10.1177/0731684413492866.
- Bajpai, P. K., I. Singh, and J. Madaan. 2013. Tribological behavior of natural fiber reinforced PLA composites. Wear 297 (1–2):829–40. doi: https://doi.org/10.1016/j.wear.2012.10.019.
- Bello, S., J. Agunsoye, B. Z. K. Hassan, and I. Martiale Raheem. 2015. Epoxy resin based composites, mechanical and tribological properties: A review. Tribology in Industry 37:1–29.
- Blissett, R. S., and N. A. Rowson. 2012. A review of the multi-component utilisation of coal fly ash. Fuel 97:1–23.
- Chand, N., and D. Jain. 2005. Effect of temperature on electrical behavior of flyash-filled epoxy gradient composites. Applied Polymer 100 (2), 1269–1276.
- Chauhan, S. R., A. Kumar, and I. Singh. 2010. Sliding friction and wear behavior of vinyl ester and its composites under dry and water-lubricated sliding conditions. Materials & Design 31 (6):2745–51. doi: https://doi.org/10.1016/j.matdes.2010.01.020.
- Compare epoxy physical properties. 2017. https://www.westsystem.com/products/compare-epoxy-physical-properties/.
- Compound summary of barium sulfate. 2018. https://pubchem.ncbi.nlm.nih.gov/compound/Barium-sulfate.
- George, J., and J. I. I. Verpoest. 1999. Mechanical properties of flax fiber-reinforced epoxy composites. Die Angewandte Makromolekulare Chemie 272 (1):41–5. doi: https://doi.org/10.1002/(SICI)1522-9505(19991201)272:1 < 41::AID-APMC41 > 3.0.CO;2-X.
- Ghosh, A., and C. Subbarao. 1998. Hydraulic conductivity and leachate characteristics of stabilized fly ash. Journal of Environmental Engineering 124 (9):812–20. doi: https://doi.org/10.1061/(ASCE)0733-9372(1998)124:9(812).
- Jayamani, E., M. Rahman, D. A. Benhur, M. K. Bakri, A. Kakar, and A. Khan. 2020. Comparative study of fly ash/sugarcane fiber reinforced polymer composites properties. Biological Research 15 (3):5514–31.
- Krishnasamy, P., G. Rajamurugan, B. Muralidharan, A. P. Arbat, and B. P. Kishorkumar. 2021. Effect of S-2304 wire-mesh angle in hemp/flax composite on mechanical and twist drilling surface response analysis. Journal of Industrial Textiles 152808372098847. doi: https://doi.org/10.1177/1528083720988477.
- Krishnasamy, P., G. Rajamurugan, S. Aravind Raj, and E. Sudhagar. 2020a. Vibration and wear characteristics of aloevera/flax/hemp woven fiber epoxy composite reinforced with wire mesh and BaSO4. Journal of Natural Fibers. doi: https://doi.org/10.1080/15440478.2020.1835782.
- Krishnasamy, P., G. Rajamurugan, and M. Thirumurugan. 2020b. Performance of fiber metal laminate composites embedded with Al and Cu wire mesh. Journal of Industrial Textiles. doi: https://doi.org/10.1177/1528083720935570.
- Kumar, D. R., P. S. S. K. Varma, and B. N. Rao. 2017. Optimum drilling parameters of coir fiber-reinforced polyester composites. American Journal of Mechanical and Industrial Engineering 2 (2):92–7. doi: https://doi.org/10.11648/j.ajmie.20170202.15.
- Latha, S., and M. P. Venkateswara Rao. 2018. Investigation into effect of ceramic fillers on mechanical and tribological properties of bamboo-glass hybrid fiber reinforced polymer composites. Silicon 10 (4):1543–50. doi: https://doi.org/10.1007/s12633-017-9637-7.
- Lazar, M. B., and P. Xirouchakis. 2011. Experimental analysis of drilling fiber-reinforced composites. International Journal of Machine Tools and Manufacture. 51 (12):937–46. doi: https://doi.org/10.1016/j.ijmachtools.2011.08.009.
- Liu, L., B.-M. Zhang, D.-F. Wang, and Z.-J. Wu. 2006. Effects of cure cycles on void content and mechanical properties of composite laminates. Composite Structures 73 (3):303–9. doi: https://doi.org/10.1016/j.compstruct.2005.02.001.
- Manimaran, R., I. Jayakumar, R. Mohammad Giyahudeen, and L. Narayanan. 2018. Mechanical properties of fly ash composites-A review. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 40 (8):887–93. doi: https://doi.org/10.1080/15567036.2018.1463319.
- Nagendiran, S., A. Badghaish, I. A. Hussein, A. N. Shuaib, S. A. Furquan, and M. H. Al-Mehthel. 2014. Epoxy/oil fly ash composites prepared through in situ polymerization: Enhancement of thermal and mechanical properties. Society of Plastics Engineers 37 (2):512–22. DOI doi: https://doi.org/10.1002/pc.23207.
- Nirmal, U. 2018. Friction performance of aged T-BFRP composite for bearing applications. Polymers 10 (10):1066. doi: https://doi.org/10.3390/polym10101066.
- Pandian, N. S. 2004. Fly ash characterization with reference to geotechnical applications. Journal of the Indian Institute of Science. 84 (6):189.
- Pattanaik, A., M. P. Satpathy, and S. C. Mishra. 2016. Dry sliding wear behavior of epoxy fly ash composite with Taguchi optimization. Engineering Science and Technology. An International Journal 19 (2):710–6. doi: https://doi.org/10.1016/j.jestch.2015.11.010.
- Prakash, K. G., N. Swamy, K. B. Manjunath, and B. G. Chandru. 2018. Investigation on flax natural fiber reinforced polymer matrix composites. International Journal of Engineering Research & Technology 7 (9):97–101.
- Radka, S. S. 2018. Potential applications of flax fibers. Master of science thesis, North Dakota State University, Fargo, ND.
- Raghavendra, G., S. K. Acharya, S. Ojha and S. K. Pal. 2013. Mechanical properties of fly ash filler in natural fiber-hybrid epoxy composites. 7th International Symposium on Feedstock Recycling of Polymeric Materials (7th ISFR 2013) New Delhi, India, 23–26 October 2013.
- Rajamurugan, G., A. P. Sanjay, P. Krishnasamy, B. Muralidharan, and S. Jain. 2020. Drilling and mechanical performance analysis on flax-sisal hybrid composite embedded with perforated aluminum foil. Journal of Reinforced Plastics and Composites 39 (23–24):902–17. doi: https://doi.org/10.1177/0731684420937070.
- Rajkumar, G., G. K. Sathishkumar, K. Srinivasan, R. Karpagam, V. Dhivya, K. Sakthipandi, R. Sivakumar, M. Ibrahim, and M. Mohamed Akheel. 2021. Structural and mechanical properties of lignite fly ash and flax-added polypropylene polymer matrix composite. Journal of Natural Fibers 1–19. doi: https://doi.org/10.1080/15440478.2021.1927929.
- Ram Prabhu, T., S. Basavarajappa, R. B. Santhosh, and S. M. Ashwini. 2017. Tribological and mechanical behaviour of dual-particle (nano-clay and CaSiO3)-reinforced E-glass-reinforced epoxy nanocomposites. Bulletin of Materials Science 40: 107–16. doi: https://doi.org/10.1007/s12034-016-1355-z.
- Saba, N., M. Jawaid, O. M. Alothman, P. Tahir, and A. Hassan. 2015. Recent advances in epoxy resin, natural fiber reinforced epoxy composites, and its applications. Journal of Reinforced Plastics and Composites 35 (6):447–70.
- Sathishkumar, T. P., J. Naveen, and S. Satheeshkumar. 2014. Hybrid fiber reinforced polymer composites – A review. Journal of Reinforced Plastics and Composites 33 (5):454–71. doi: https://doi.org/10.1177/0731684413516393.
- Shadrach Jeya Sekaran, A., K. Palani Kumar, and K. Pitchandi. 2015. Evaluation on mechanical properties of woven aloevera and sisal fiber hybrid reinforced epoxy composites. Bulletin of Materials Science 38 (5):1183–93. doi: https://doi.org/10.1007/s12034-015-0999-4.
- Shahzamani, M., I. Rezaeian, M. S. Loghmani, P. Zahedi, and A. Rezaeian. 2012. Effects of BaSO4, CaCO3, kaolin and quartz fillers on mechanical, chemical and morphological properties of cast polyurethane. Plast, Rub.Comp 41 (6):263–9. doi: https://doi.org/10.1179/1743289811Y.0000000035.
- Sharma, A. R., P. Govindasamy, Q. J. Krishnasamy, and C. Singh 2020. Influence of copper foil reinforcement on the mechanical and drilling efficiency of sisal/flax epoxy composite. SAE Tech. Paper; 2020-28-0416. doi: https://doi.org/10.4271/2020-28-0416.
- Sim, J., Y. Kang, B. J. Kim, Y. H. Park, and Y. C. Lee. 2020. Preparation of fly ash/epoxy composites and its effects on mechanical properties. Polymers 12:79. doi: https://doi.org/10.3390/polym12010079.
- Singh, I., P. K. Bajpai, D. Malik, J. Madaan, and N. Bhatnagar. 2011. Microwave joining of natural fiber reinforced green composites. Advanced Materials Research 410:102–5. doi: https://doi.org/10.4028/www.scientific.net/AMR.410.102.
- Singh, I., and N. Bhatnagar. 2006. Drilling of uni-directional glass fiber reinforced plastic (UD GFRP) composite laminates. The International Journal of Advanced Manufacturing Technology 27 (9–10):870–6. doi: https://doi.org/10.1007/s00170-004-2280-7.
- Susheel, K., A. Luc, N. James, D. Alain, and C. Bibin. 2011. Natural fibers, bio- and nanocomposites. International Journal of Polymer Science 2011:735932. doi: https://doi.org/10.1155/2011/735932.
- Van de Weyenberg, I., T. Chi Truong, B. Vangrimde, and I. Verpoest. 2006. Improving the properties of UD flax fiber-reinforced composites by applying an alkaline fiber treatment. Composites Part A: Applied Science and Manufacturing 37 (9):1368–76. doi: https://doi.org/10.1016/j.compositesa.2005.08.016.
- Yu, M., Y. Zheng, and J. Tian. 2020. Study on the biodegradability of modified starch/polylactic acid (PLA). Composite materials. RSC Advances 10 (44):26298–307. doi: https://doi.org/10.1039/D0RA00274G.
- Yukseloglu, S. M., and H. Yoney. 2016. The mechanical properties of flax fibre reinforced composites. In Natural fibres: Advances in science and technology towards industrial applications. RILEM book series, ed. R. Fangueiro and S. Rana, Vol. 12. Dordrecht: Springer.