916
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

A Circumferential Slot In-Line Virtual Impactor

, , &
Pages 40-49 | Received 04 Mar 2007, Accepted 04 Nov 2007, Published online: 13 Jul 2010

REFERENCES

  • ANSYS . 2005 . CFX Release 10: User Manual Cannonsburg, PA, , USA
  • Biswas , P. and Flagan , R. C. 1988 . The Particle Trap Impactor . J. Aerosol Sci. , 19 : 113 – 121 .
  • Chen , B. T. , Cheng , Y. S. and Yeh , H. C. 1990 . A Study of Density Effect and Droplet Deformation in the TSI Aerodynamic Particle Sizer . Aerosol Sci. Technol. , 12 : 278 – 285 .
  • Chow , J. 1995 . Measurement Methods to Determine Compliance with Ambient Air Quality Standards for Suspended Particles . J. Air & Waste Manage. Assoc. , 45 : 320 – 382 .
  • Conner , W. D. 1966 . An Inertial-Type Particle Separator for Collecting Large Samples . J. Air Pollut. Control Assoc. , 16 : 35 – 38 .
  • Ding , Y. , Ferguson , S. T. , Wolfson , J. M. and Koutrakis , P. 2001 . Development of a High Volume Slit Nozzle Virtual Impactor to Concentrate Coarse Particles . Aerosol Sci. Technol. , 34 : 274 – 283 .
  • Dzubay , T. G. and Stevens , R. K. 1975 . Ambient Air Analysis with Dichotomous Sampler and X-ray Fluorescence . Environ. Sci. Technol. , 9 : 663 – 668 .
  • Haglund , J. S. and McFarland , A. R. 2004 . A Circumferential Slot Virtual Impactor . Aerosol Sci. Technol. , 38 : 664 – 674 .
  • Hari , S. , Hassan , Y. A. and McFarland , A. R. 2005 . Computational fluid dynamics simulation of a rectangular slit real impactor's performance . Nuclear Engineering and Design , 235 : 1045 – 1028 .
  • Hering , S. , Gundel , L. and Daisey , J. M. 1997 . A Microslot Impactor for Organic Aerosol Sampling . J. Aerosol Sci. , 28 : 1283 – 1290 .
  • Kim , H. T. , Han , Y. T. , Kim , Y. J. , Lee , K. W. and Chun , K. J. 2002 . Design and Test of 2.5 μ m Cutoff Size Inlet Based on a Particle Cup Impactor Configuration . Aerosol Sci. Technol. , 36 : 136 – 144 .
  • Lee , S. A. 2001 . A Slit Impactor Utilizing a Transpirated Impaction Surface for Collection of Bioaerosols , M.S. Thesis College Station, TX : Department of Mechanical Engineering, Texas A&M University .
  • Loo , B. W. and Cork , C. P. 1988 . Development of High efficiency Virtual Impactors . Aerosol Sci. Technol. , 9 : 167 – 176 .
  • Loo , B. W. and Jaklevic , J. M. 1974 . An Evaluation of the ERC Virtual Impactor , Berkeley, CA : Lawrence Berkeley National Laboratory . Report: LBL-2468
  • Marple , V. A. , Rubow , K. L. and Behm , S. M. 1991 . A Micro-Orifice Uniform Deposit Impactor (MOUDI) . Aerosol Sci, Technol. , 14 : 434 – 446 .
  • McFarland , A. R. , Ortiz , C. A. and Bertch , R. W. J. 1984 . A 10 μ m Cutpoint Size Selective Inlet for Hi-Vol Samplers . J. Air Pollut. Contr. Assoc. , 34 : 544 – 547 .
  • Olan-Figueroa , E. , McFarland , A. R. and Ortiz , C. A. 1982 . Flattening Coefficients for DOP and Oleic Acid Droplets Deposited on Treated Glass Slides . Amer. Ind. Hyg. Assoc. J. , 43 : 628 – 639 .
  • Peterson , C. M. Aerosol Concentrator and Classifier . U.S. Patent 3,901,798 . 1975 . Filed November 21, 1973, and Issued August 26, 1975
  • Romay , F. J. , Roberts , D. L. , Marple , V. A. , Liu , B. Y. H. and Olson , B. 2002 . A High Performance Aerosol Concentrator for Bioaerosol Agent Detection . Aerosol Sci. Technol. , 36 : 217 – 226 .
  • Thien , B. F. 2006 . College Station, TX : Aerosol Technology Laboratory, Department of Mechanical Engineering, Texas A&M University . Personal communications
  • Thompson , M. W. , Donelly , J. , Grinshpun , S. A. , Juozaitis , A. and Willike , K. 1994 . Method and Test System for Evaluation of Bioaerosol Samplers . J. Aerosol Sci. , 25 : 1579 – 1593 .
  • TSI Inc . 2001 . Model 3306 Impactor Inlet Specification Sheet St. Paul, MN, , USA
  • U.S. EPA . 1987 . Revisions to the Ambient Air Quality Standards for Particulate Matter . Federal Register , 52 : 24,634 – 24,669 .
  • U.S. NRC . 2005 . Sensor Systems for Biological Agent Attacks: Protecting Buildings and Military Bases , Washington, DC : U.S. National Research Council. National Academies Press . Committee on Materials and Manufacturing Processes for Advanced Sensors

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.