Design and Characterization of an Improved Screw-Assisted Rotary Feeding System for Aerosolization of Ultra-Small Quantities of Particulate Solids

REFERENCES

• Buchanan , J. S. and Schoennagel , H. J. 1994 . Moving Cup Particulates Feeder Used in Laboratory FCC Unit . Powder Technol , 78 ( 3 ) : 281 – 285 .
   Google Scholar
• Collins , G. F. 1975 . Measurement of Variation in Output Rate from Aerosol Generator . J. Aerosol Sci. , 6 ( 3–4 ) : 169 – 172 .
   Google Scholar
• Francis , T. M. , Gump , C. J. and Weimer , A. W. 2006 . Spinning Wheel Powder Feeding Device—Fundamentals and Applications . Powder Technol , 170 ( 1 ) : 36 – 44 .
   Google Scholar
• Francis , T. M. , Kreider , P. B. , Lichty , P. R. and Weimer , A. W. 2009 . An Investigation of a Fluidized Bed Solids Feeder for an Aerosol Flow Reactor . Powder Technol , doi:10.1016/j.powtec.2009.04.020
   Google Scholar
• Gundogdu , M. Y. 1995 . Swirling Flow Generators and Swirling Flow Separators , MS Thesis Gaziantep/Turkey : Univ. of Gaziantep .
   Google Scholar
• Gundogdu , M. Y. 2004 . Design Improvements on Rotary Valve Particle Feeders Used for Obtaining Suspended Airflows . Powder Technol. , 139 ( 1 ) : 76 – 80 .
   Google Scholar
• Hartman , M. , Svoboda , K. and Trnka , O. 1991 . Unsteady-State Retention of Sulfur Dioxide in a Fluidized Bed Continual Feeding of Lime and Limestone . Ind. Eng. Chem. Res. , 30 ( 8 ) : 1855 – 1864 .
   Google Scholar
• Higuchi , M. A. and Steinhagen , W. H. 1991 . Modification and Characterization of Dry Material Feeder Delivery of Red and Violet Dye Mixtures . Inhal. Toxicol , 3 ( 2 ) : 223 – 235 .
   Google Scholar
• Hinds , W. C. 1982 . Aerosol Technology , New York : John Wiley and Sons .
   Google Scholar
• Jung , J. H. , Oh , H. C. , Noh , H. S. , Ji , J. H. and Kim , S. S. 2006 . Metal Nanoparticle Generation Using a Small Ceramic Heater with Local Heating Area . J. Aerosol Sci. , 37 ( 12 ) : 1662 – 1670 .
   Web of Science ®Google Scholar
• Jung , J. H. , Lee , C. H. , Lee , J. E. , Lee , J. H. , Kim , S. S. and Lee , B. U. 2009a . Design and Characterization of a Fungal Bioaerosol Generator Using Multi-Orifice Air Jets and a Rotating Substrate . J. Aerosol Sci. , 40 ( 1 ) : 72 – 80 .
   Web of Science ®Google Scholar
• Jung , J. H. , Lee , J. E. and Kim , S. S. 2009b . An Evaluation Method for Spore Concentration Uniformity on a Fungal Substrate: Use of a Real-Time Aerosolization Technique . Environ. Eng. Sci , 26 ( 4 ) : 861 – 866 .
   Web of Science ®Google Scholar
• Kehlenbeck , V. and Sommer , K. 2003 . Possibilities to Improve the Short-Term Dosing Constancy of Volumetric Feeders . Powder Technol , 138 ( 1 ) : 51 – 56 .
   Google Scholar
• Liu , B. Y. H. 1975 . Fine Particles: Aerosol Generation, Measurement, Sampling, and Analysis , 146 New York : Academic Press .
   Google Scholar
• Masuda , H. and Gotoh , K. 1996 . Dry Dispersion of Fine Particles . Colloids and Surfaces A: Physicochemical and Engineering Aspects , 109 : 29 – 37 .
   Google Scholar
• Pohorely , M. , Svoboda , K. and Hartman , M. 2004 . Feeding Small Quantities of Particulate Solids . Powder Technol. , 142 ( 1 ) : 1 – 6 .
   Google Scholar
• Reist , P. C. and Taylor , L. 2000 . Development and Operation of an Improved Turntable Dust Feeder . Powder Technol. , 107 ( 1–2 ) : 36 – 42 .
   Web of Science ®Google Scholar
• Schneider , L. C. R. , Sinka , I. C. and Cocks , A. C. F. 2007 . Characterisation of the Flow Behaviour of Pharmaceutical Powders Using a Model Die-Shoe Filling System . Powder Technol. , 173 ( 1 ) : 59 – 71 .
   Google Scholar
• Tang , L. and Chen , W. Y. 1999 . Improvements on a Particle Feeder for Experiments Requiring Low Feed Rates . Review of Scientific Instruments. , 70 ( 7 ) : 3143 – 3144 .
   Google Scholar
• Teague , S. , Veranth , J. , Aust , A. and Pinkerton , K. 2005 . Dust Generator for Inhalation Studies with Limited Amounts of Archived Particulate Matter . Aerosol Sci. Technol. , 39 ( 2 ) : 85 – 91 .
   Web of Science ®Google Scholar
• Veranth , J. M. , Smith , K. R. , Aust , A. E. , Dansie , S. L. , Griffith , J. B. , Hu , A. A. , Huggins , M. L. and Lighty , J. S. 2000 . Coal Fly Ash and Mineral Dust for Toxicology and Particle Characterization Studies: Equipment and Methods for PM2.5- and PM1-Enriched Samples . Aerosol Sci. Technol. , 32 ( 2 ) : 127 – 141 .
   Web of Science ®Google Scholar
• Yu , Y. and Arnold , P. C. 1996 . The Influence of Screw Feeders on Bin Flow Patterns . Powder Technol. , 88 ( 1 ) : 81 – 87 .
   Web of Science ®Google Scholar