2,094
Views
41
CrossRef citations to date
0
Altmetric
Original Articles

Effective Density and Volatility of Particles Emitted from Gasoline Direct Injection Vehicles and Implications for Particle Mass Measurement

&

REFERENCES

  • Albrecht, B. A. (1989). Aerosols, Cloud Microphysics, and Fractional Cloudiness. Science, 245(4923):1227–1230.
  • Awasthi, A., Wu, B. S., Liu, C. N., Chen, C. W., Uang, S. N., and Tsai, C. J. (2013). The Effect of Nanoparticle Morphology on the Measurement Accuracy of Mobility Particle Sizers. Journal of Metrology Society of India, 28(3):205–215.
  • Balasubramanian, S. K., Jittiwat, J., Manikandan, J., Ong, C. N., Yu, L. E., and Ong, W. Y. (2010). Biodistribution of Gold Nanoparticles and Gene Expression Changes in the Liver and Spleen After Intravenous Administration in Rats. Biomaterials, 31:2034–2042.
  • Barone, T. L., Lall, A. A., Storey, J. M. E., Mulholland, G. W., Prikhodko, V. Y., Frankland, J. H., Parks, J. E., and Zachariah, M. R. (2011). Size-Resolved Density Measurements of Particle Emissions from an Advanced Combustion Diesel Engine: Effect of Aggregate Morphology. J. Energy Fuels, 25:1978–1988.
  • Barone, T. L., Storey, J. M. E., Youngquist, A. D., and Szybist, J. P. (2012). An analysis of Direct-Injection Spark-Ignition (DISI) Soot Morphology. Atmos. Environ., 49:268–274.
  • Boucher, O., Randall, D., Artaxo, P., Bretherton, C., Feingold, G., Forster, P., Kerminen, V. M., Kondo, Y., Liao, H., Lohmann, U., Rasch, P., Satheesh, S. K., Sherwood, S., Stevens, B., and Zhang, X..Y. (2013). Clouds and Aerosols, in Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change, T. F. Stocker, D. Qin, G.-K. Plattner, M. Tignor, S. K. Allen, J. Boschung, A. Nauels, Y. Xia, V. Bex, and P. M. Midgley, eds., Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA.
  • CARB, 2011. Appendix P: LEV III PM technical support document - Development of particulate matter mass standards for future light-duty vehicles. Prepared by California Air Resources Board, Sacramento, CA. http://www.arb.ca.gov/regact/2012/leviiighg2012/levappp.pdf. Accessed 28 March 2015.
  • Chase, R. E., Duszkiewicz, G. J., Richert, J. F. O., Lewis, D., Maricq, M. M., and Xu, N. (2004). PM Measurement Artifact: Organic Vapor Deposition on Different Filter Media. SAE Technical Paper No. 2004-01-0967.
  • Chen, L., Braisher, M., Crossley, A., Stone, R., and Richardson, D. (2010). The Influence of Ethanol Blends on Particulate Matter Emissions from Gasoline Direct Injection Engines. SAE Technical Paper No. 2010-01-0793.
  • Dastanpour, R., and Rogak, S. N. (2014). Observations of a Correlation Between Primary Particle and Aggregate Size for Soot Particles. Aerosol Sci. Technol., 48:1043–1049.
  • Ehara, K., Hagwood, C., and Coakley, K. J. (1996). Novel method to classify aerosol particles according to their mass-to-charge ratio-Aerosol particle mass analyser. J. Aerosol Sci., 27(2):217–234.
  • Ghazi, R., Tjong, H., Soewono, A., Rogak, S. N., and Olfert, J. S. (2013). Mass, Mobility, Volatility, and Morphology of Soot Particles Generated by a McKenna and Inverted Burner. Aerosol Sci. Technol., 47:395–405.
  • Giordano, M., Espinoza, C., and Asa-Awuku, A. (2015). Experimentally Measured Morphology of Biomass Burning Aerosol and its Impacts on CCN Ability. Atmos. Chem. Phys. 15(4):1807–1821.
  • Graves, B., Olfert, J., Patychuk, B., Dastanpour, R., and Rogak, S. (2015). Characterization of Particulate Matter Morphology and Volatility from a Compression-Ignition Natural-Gas Direct-Injection Engine. Aerosol Sci. Technol., 49:589–598.
  • Gu, X., Huang, Z., Cai, J., Gong, J., Wu, X., and Lee, C. (2012). Emission Characteristics of a Spark-Ignition Engine Fuelled with Gasoline-n-butanol Blends in Combination with EGR. Fuel, 93:611–617.
  • Harris, S. J., and Maricq, M. M. (2001). Signature Size Distributions for Diesel and Gasoline Engine Exhaust Particulate Matter. Aerosol Sci., 32:749–764.
  • Hassan, M. S., and Lau, R. W. M. (2009). Effect of Particle Shape on Dry Particle Inhalation: Study of Flowability, Aerosolization, and Deposition Properties. AAPS Pharm. Sci. Tech., 10(4):1252–1262.
  • He, X., Ratcliff, M. A., and Zigler, B. T. (2012). Effects of Gasoline Direct Injection Engine Operating Parameters on Particle Number Emissions. J. Energy Fuels, 26:2014–2027.
  • Hedge, M., Weber, P., Gingrich, J., Alger, T., and Khalek, I. (2011). Effect of EGR on Particle Emissions from a GDI Engine. SAE Technical Paper No. 2011-01-0636.
  • Johnson, T. J., Symonds, J. P. R., and Olfert, J. S. (2013). Mass–Mobility Measurements Using a Centrifugal Particle Mass Analyzer and Differential Mobility Spectrometer. Aerosol Sci. Technol., 47:1215–1225.
  • Khalek, I. A., Bougher, T., and Jetter, J. J. (2010). Particle Emissions from a 2009 Gasoline Direct Injection Engine Using Different Commercially Available Fuels. SAE Technical Paper No. 2010-01-2117.
  • Kim, Y. [Yongha], Kim, Y. [Youngjae], Kang, J., Jun, S., Rew, S., and Lee, D. (2013). Fuel Effect on Particle Emissions of a Direct Injection Engine. SAE International Paper 2013-01-1559. Doi: 10.4271/2013-01-1559
  • Kinney, P. D., Pui, D. Y. H., Mulholland, G. W., and Bryner, N. P. (1991). Use of the Electrical Classification Method to Size 0.1 μm SRM Particles—A Feasibility Study. J. Res. Natl. Inst. Stan. Technol., 96:147–176.
  • Lee, K. O., Seong, H., Sakai, S., Hageman, M., and Rothamer, D. (2013). Detailed Morphological Properties of Nanoparticles from Gasoline Direct Injection Engine Combustion of Ethanol Blends. SAE Technical Paper No. 2013-24-0185.
  • Liu, Z., Swanson, J., Kittelson, D. B., and Pui, D. Y. H. (2012). Comparison of Methods for Online Measurement of Diesel Particulate Matter. Environ. Sci. Technol., 46:6127–6133.
  • Liu, Z. G., Vasys, V. N., Dettmann, M. E., Schauer, J. J., Kittelson, D. B., and Swanson, J. (2009). Comparison of Strategies for the Measurement of Mass Emissions from Diesel Engines Emitting Ultra-Low Levels of Particulate Matter. Aerosol Sci. Technol., 43:1142–1152.
  • Mamakos, A. (2011). Feasibility of Introducing Particulate Filters on Gasoline Direct Injection Vehicles. JRC Scientific and Policy Reports. Eur. Comm. Report EUR 25297 EN.
  • Maricq, M. M., Podsiadlik, D. H., Brehob, D. D., and Haghgooie, M. (1999). Particulate Emissions from a Direct-Injection Spark-Ignition (DISI) Engine. SAE Technical Paper No. 1999-01-1530.
  • Maricq, M. M., and Xu, N. (2004). The Effective Density and Fractal Dimension of Soot Particles from Premixed Flames and Motor Vehicle Exhaust. J. Aerosol Sci., 35:1251–1274.
  • Mathis, U., Mohr, M., and Forss, A. M. (2005). Comprehensive Particle Characterization of Modern Gasoline and Diesel Passenger Cars at Low Ambient Temperatures. Atmos. Environ., 39:107–117.
  • Momenimovahed, A., Checkel, D., and Olfert, J. (2015). Particle Number Emission Factors and Volatile Fraction of Particles Emitted from On-road Gasoline Direct Injection Passenger Vehicles. Atmos. Environ., 102:105–111.
  • Ntziachristos, L., Amanatidis, S., Samaras, Z., Giechaskiel, B., and Bergmann, A. (2013). Use of a Catalytic Stripper as an Alternative to the Original PMP Measurement Protocol. SAE Int. J. Fuels Lubricants, 6(2):532–541.
  • Olfert, J. S., and Collings, N. (2005). New Method for Particle Mass Classification-the Couette Centrifugal Particle Mass Analyzer. J. Aerosol Sci., 36:1338–1352.
  • Olfert, J. S., Symonds, J. P. R., and Collings, N. (2007). The Effective Density and Fractal Dimension of Particles Emitted from a Light-Duty Diesel Vehicle with a Diesel Oxidation Catalyst. J. Aerosol Sci., 38:69–82.
  • Park, K., Cao, F., Kittelson, D. B., and McMurry, P. H. (2003). Relationship Between Particle Mass and Mobility for Diesel Exhaust Particles. Environ. Sci. Technol., 37:577–583.
  • Park, K., Kittelson, D. B., and McMurry, P. H. (2003). A Closure Study of Aerosol Mass Concentration Measurements: Comparison of Values Obtained with Filters and by Direct Measurements of Mass Distributions. Atmos. Environ., 37:1223–1230.
  • Price, P., Stone, R., OudeNijeweme, D., and Chen, X. (2007). Cold Start Particulate Emissions from a Second Generation DI Gasoline Engine. SAE Technical Paper No. 2007-01-1931.
  • Quiros, D. C., Hu, S., Hu, S., Lee, E. S., Sardar, S., Wang, X., Olfert, J. S., Jung, H. S., Zhu, Y., and Huai, T. (2015). Particle Effective Density and Mass During Steady-State Operation of GDI, PFI, and Diesel Passenger Cars. J. Aerosol Sci., 83:39–54.
  • Rader, D. J., and McMurry, P. H. (1986). Application of the Tandem Differential Mobility Analyzer to Studies of Droplet Growth or Evaporation. J. Aerosol Sci., 17(5):771–787.
  • Rissler, J., Messing, M. E., Malik, A. I., Nilsson, P. T., Nordin, E. Z., Bohgard, M., Sanati, M., and Pagels, J. H. (2013). Effective Density Characterization of Soot Agglomerates from Various Sources and Comparison to Aggregation Theory. Aerosol Sci. Technol., 47:792–805.
  • Ristimaki, J., Vaaraslahti, K., Lappi, M., and Keskinen, J. (2007). Hydrocarbon Condensation in Heavy-Duty Diesel Exhaust. Environmental Science and Technology, 41(18):6397–6402.
  • Sakurai, H., Park, K., McMurry, P. H., Zarling, D. D., Kittelson, D. B., and Ziemann, P. J. (2003). Size-dependent Mixing Characteristics of Volatile and Nonvolatile Components in Diesel Exhaust Aerosols. Environ. Sci. Technol., 37:5487–5495.
  • Scarnato, B. V., Vahidinia, S., Richard, D. T., and Kirchstetter, T. W. (2013). Effects of Internal Mixing and Aggregate Morphology on Optical Properties of Black Carbon Using a Discrete Dipole Approximation Model. Atmos. Chem. Phys., 13:5089–5101.
  • Seong, H., Choi, S., and Lee, K. (2014). Examination of Nanoparticles from Gasoline Direct-Injection (GDI) Engines Using Transmission Electron Microscopy (TEM). Int. J. Autom. Technol., 15(2):175–181.
  • Seong, H., Lee, K.. and Choi, S. (2014). Effects of Engine Operating Parameters on Morphology of Particulates from a Gasoline Direct Injection (GDI) Engine. SAE Technical Paper No. 2013-01-2574.
  • Stone, R. (2012). Introduction to Internal Combustion Engines, 4th ed. Palgrave Macmillan, Warrendale, PA.
  • Storey, J. M., Barone, T., Norman, K., and Lewis, S. (2010). Ethanol Blend Effects On Direct Injection Spark- Ignition Gasoline Vehicle Particulate Matter Emissions. SAE Technical Paper No. 2010-01-2129.
  • Storey, J. M., Lewis, S., Szybist, J., Thomas, J., Barone, T., Eibl, M., Nafziger, E., and Kaul, B. (2014). Novel Characterization of GDI Engine Exhaust for Gasoline and Mid-Level Gasoline-Alcohol Blends. SAE Int. J. Fuels Lubr., 7(2):571–579.
  • Symonds, J. (2010). Calibration of Fast Response Differential Mobility Spectrometers, in Conference on Metrology of Airborne Nanoparticles, Standardisation and Applications, June 8–10. National Physics Laboratory, London, UK. http://www.npl.co.uk/upload/pdf/20100608_mansa_symonds.pdf, Retrieved Jan 23/2015.
  • Symonds, J. P. R., Price, P., Williams, P. I., and Stone, R. (2008). Density of Particles Emitted from a Gasoline Direct Injection Engine. Eur. Aerosol Conf., 2008, Zurich, Switzerland.
  • Symonds, J. P. R., Reavell, K. St. J., Olfert, J. S., Campbell, B. W., and Swift, S. J. (2007). Diesel Soot Mass Calculation in Real-time with a Differential Mobility Spectrometer. J. Aerosol Sci., 38:52–68.
  • Virtanen, A., Ristimaki, J., Marjamaki, M., Vaaraslahti K., Keskinen, J., and Lappi, M. (2002). Effective Density of Diesel Exhaust Particles as a Function of Size. SAE Technical Paper No. 2002-01-0056.
  • Zhang, Z., Wanga, T., Jia, M., Wei, Q., Meng, X., and Shu, G. (2014). Combustion and Particle Number Emissions of a Direct Injection Spark Ignition Engine Operating on Ethanol/Gasoline and n-butanol/gasoline Blends with Exhaust Gas Recirculation. Fuel, 130:177–188.
  • Zhao, F., Lai, M. C., and Harrington, D. L. (1999). Automotive Spark Ignited Direct-injection Gasoline Engines. Progr. Energy Combust. Sci., 25:437–562.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.