Physical performances and kinetics of evaporation of the CIP 10-M personal sampler's rotating cup containing aqueous or viscous collection fluid

References

• AFNOR. (2012). Qualité de l'Air – Air des Lieux de Travail – Prélèvement d'Aérosols Solides à l'Aide d'une Coupelle Rotative (Fractions Alvéolaire, Thoracique et Inhalable)/Air Quality – Workplace Air –Solid Aerosol Sampling with a Rotating Cup (Respirable, Thoracic and Inhalable Fractions), NF-X-43-262. AFNOR, La Plaine Saint-Denis, pp. 19.
   Google Scholar
• AFNOR. (2014). Workplace Exposure – Assessment of Sampler Performance for Measurement of Airborne Particle Concentrations – Part 2: Laboratory Performance Test Based on Determination of Sampling Efficiency, NFEN13205. AFNOR, La Plaine Saint-Denis, pp. 39.
   Google Scholar
• Agranovski, I. E. (2007). Personal Sampler for Viable Airborne Microorganisms: Main Development Stages. Clean, 35:111–117.
   Google Scholar
• Bau, S., Bémer, D., Grippari, F., Appert-Collin, J.-C., and Thomas, D. (2014). Determining the Effective Density of Airborne Nanoparticles using Multiple Charging Correction in a Tandem DMA/ELPI Setup. J. Nanopart. Res., 16:2629–2642.
   Web of Science ®Google Scholar
• Bau, S., Jacoby, J., and Witschger, O. (2012). Evaluation of the Diffusion Size Classifier (meDiSC) for the Real-Time Measurement of Particle Size and Number Concentration of Nanoaerosols in the Range 20–700 nm. J. Environ. Monit., 14:1014–1023.
   PubMed Web of Science ®Google Scholar
• Chang, C.-W., and Chou, F.-C. (2011). Assessment of Bioaerosol Sampling Techniques for Viable Legionella pneumophila by Ethidium Monoazide Quantitative PCR. Aerosol Sci. Tech., 45:343–351.
   Web of Science ®Google Scholar
• Chen, B. T., Feather, G. A., Maynard, A., and Rao, C. Y. (2004). Development of a Personal Sampler for Collecting Fungal Spores. Aerosol Sci. Tech., 38:926–937.
   Web of Science ®Google Scholar
• Crook, B., Kenny, L. C., Stagg, S., Stancliffe, J. D., Futter, S. J., Griffiths, W. D., and Stewart, I. W. (1997). Assessment of the Suitability of Different Substrate Materials for Bioaerosol Sampling. Ann. Occup. Hyg., 41:647–652.
   Google Scholar
• De Carlo, P. F., Slowik, J. G., Wornsop, D. R., Davidovits, P., and Jimenez, J. L. (2004). Particle Morphology and Density Characterization by Combined Mobility and Aerodynamic Diameter Measurements. Part 1: Theory. Aerosol Sci. Tech., 38:1185–1205.
   Web of Science ®Google Scholar
• Fabriès, J. F., Carton, B., and Wrobel, R. (1984). Equipment for the Study of Air Sampling Instruments with Real Time Measurement of the Aerosol Concentration. Staub. Reinhalt. Luft., 44:405–409.
   Web of Science ®Google Scholar
• Fabriès, J. F., Görner, P., Kauffer, E., Wrobel, R., and Vigneron, J. C. (1998). Personal Thoracic CIP 10-T Sampler and its Static Version CATHIA-T. Ann. Occup. Hyg., 42:453–465.
   PubMed Web of Science ®Google Scholar
• Görner, P., and Fabriès, J. F. (1996). Industrial Aerosol Measurement According to the New Sampling Conventions. Occup. Hyg., 3:361–376.
   Google Scholar
• Görner, P., Fabriès, J. F., Duquenne, P., Witschger, O., and Wrobel, R. (2006). Bioaerosol Sampling by a Personal Rotating Cup Sampler CIP 10-M. J. Environ. Monit., 8:43–48.
   PubMed Web of Science ®Google Scholar
• Görner, P., Simon, X., Wrobel, R., Kauffer, E., and Witschger, O. (2010). Laboratory Study of Selected Personal Inhalable Aerosol Samplers. Ann. Occup. Hyg., 54:165–187.
   PubMed Web of Science ®Google Scholar
• Görner, P., Wrobel, R., Micka, V., Skoda, V., Denis, J., and Fabriès, J. F. (2001). Study of Fifteen Respirable Aerosol Samplers Used in Occupational Hygiene. Ann. Occup. Hyg., 45:43–54.
   PubMed Web of Science ®Google Scholar
• Görner, P., Wrobel, R., and Simon, X. (2009). High Efficiency CIP 10-I Personal Inhalable Aerosol Sampler. J. Phys. Conf. Ser. 151(012061):1–9.
   Google Scholar
• Guichard, J. C. (1976). Aerosol Generation Using Fluidized Beds, in Fine Particles – Aerosol Generation, Measurement, Sampling, and Analysis, B. Y. H. Liu, ed., Academic Press, New York, pp. 173–193.
   Google Scholar
• Jensen, P. A., Todd, W. F., Davis, G. N., and Scarpino, P. V. (1992). Evaluation of Eight Bioaerosol Samplers Challenged with Aerosols of Free Bacteria. Am. Ind. Hyg. Assoc. J., 53:660–667.
   PubMed Web of Science ®Google Scholar
• Kim, J. H., Mulholland, G. W., Kukuck, S. R., and Pui, D. Y. H. (2005). Slip Correction Measurements of Certified PSL Nanoparticles using a Nanometer Differential Mobility Analyzer (nano-DMA) for Knudsen Number from 0.5 to 83. J. Res. Natl. Inst. Stan., 110(1):31–54.
   PubMed Web of Science ®Google Scholar
• King, M. D., and McFarland, A. R. (2012). Bioaerosol Sampling with a Wetted Wall Cyclone: Cell Culturability and DNA Integrity of Escherichia coli Bacteria. Aerosol Sci. Tech., 46:82–93.
   Web of Science ®Google Scholar
• Lesage, J., Stanley, J., Karoly, W. J., and Lichtenberg, F. W. (2007). Airborne Methylene Diphenyl Diisocyanate (MDI) Concentrations Associated with the Application of Polyurethane Spray Foam in Residential Construction. J. Occup. Environ. Hyg., 4:145–155.
   PubMedGoogle Scholar
• Li, C. S., Hao, M. L., Lin, W. H., Chang, C. W., and Wang, C. S. (1999). Evaluation of Microbial Samplers for Bacterial Microorganisms. Aerosol Sci. Tech., 30:100–108.
   Web of Science ®Google Scholar
• Lidén, G., and Kenny, L. C. (1992). The Performance of Respirable Dust Samplers: Sampler Bias, Precision and Inaccuracy. Ann. Occup. Hyg., 36:1–22.
   Web of Science ®Google Scholar
• Lindsley, W. G., Schmechel, D., and Chen, B. T. (2006). A Two-Stage Cyclone using Microcentrifuge Tubes for Personal Bioaerosol Sampling. J. Environ. Monit., 8:1136–1142.
   PubMed Web of Science ®Google Scholar
• Puscasu, S., Aubin, S., Cloutier, Y., Sarazin, P., Tra, H. V., and Gagné, S. (2015). CIP10 Optimization for 4,4-Methylene Diphenyl Diisocyanate Aerosol Sampling and Field Comparison with Impinger Method. Ann. Occup. Hyg., 59:347–357.
   PubMed Web of Science ®Google Scholar
• Reponen, T., Willeke, K., Grinshpun, S., and Nevalainen, A. (2011). Biological Particle Sampling, in Aerosol Measurement: Principles, Techniques and Applications. 3rd ed. P. Kulkarni, P. A. Baron, and K. Willeke, eds., John Wiley & Sons Inc., New Jersey, pp. 549–570.
   Google Scholar
• Rule, A. M., Kesavan, J., Schwab, K. J., and Buckley, T. J. (2007). Application of Flow Cytometry for the Assessment of Preservation and Recovery Efficiency of Bioaerosol Samplers Spiked with Pantoea agglomerans. Environ. Sci. Tech., 41:2467–2472.
   PubMed Web of Science ®Google Scholar
• Simon, X., and Duquenne, P. (2013). Feasibility of Generating Peaks of Bioaerosols for Laboratory Experiments. Aerosol Air Qual. Res., 13:877–886.
   Web of Science ®Google Scholar
• Simon, X., Duquenne, P., Koehler, V., Piernot, C., Coulais, C., and Faure, M. (2011). Aerosolisation of Escherichia coli and Associated Endotoxin Using an Improved Bubbling Bioaerosol Generator. J. Aerosol Sci., 42:517–531.
   Web of Science ®Google Scholar
• TolchinskY, A. D., Sigaev, V. I., Varfolomeev, A. N., Uspenskaya, S. N., Cheng, Y. S., and Su, W. C. (2011). Performance Evaluation of Two Personal Bioaerosol Samplers. J. Environ. Sci. Health, Part A, 46:1690–1698.
   PubMed Web of Science ®Google Scholar
• Wang, H. C., and John, W. (1987). Particle Density Correction for the Aerodynamic Particle Sizer. Aerosol Sci. Tech., 6:191–198.
   Web of Science ®Google Scholar
• Wang, Z., Reponen, T., Grinshpun, A. S., Gorny, L. R., and Willeke, K. (2001). Effect of Sampling Time and Air Humidity on the Bioefficiency of Filter Samplers for Bioaerosol Collection. J. Aerosol Sci., 32:661–674.
   Web of Science ®Google Scholar
• Yao, M., and Mainelis, G. (2006). Investigation of Cut-off Sizes and Collection Efficiencies of Portable Microbial Samplers. Aerosol Sci. Tech., 40:595–606.
   Web of Science ®Google Scholar