References
- Berglund, R. N., and Liu, B. Y. H. (1973). Generation of Monodisperse Aerosol Standards. Environ. Sci. Technol., 7(2):147–153.
- Faulkner, W. B., and Haglund, J. S. (2012). Flattening Coefficients for Oleic Acid Droplets on Treated Glass Slides. Aerosol Sci. Technol., 46(7):828–832.
- Faulkner, W. B., Smith, R., and Haglund, J. (2014). Large Particle Penetration During PM10 Sampling. Aerosol Sci. Technol., 48(6):676–687.
- Hari, S., McFarland, A. R., and Hassan, Y. A. (2007). CFD Study on the Effects of the Large Particle Crossing Trajectory Phenomenon on Virtual Impactor Performance. Aerosol Sci. Technol., 41(11):1040–1048.
- Hillamo, R. E., and Kauppinen, E. I. (1991). On the Performance of the Berner Low Pressure Impactor. Aerosol Sci. Technol., 14(1):33–47.
- Hinds, W. C. (2012). Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles. 2nd Edition. John Wiley & Sons, New York.
- John, W. (1999). A simple derivation of the cutpoint of an impactor. J. Aerosol Sci., 30(10):1317–1320.
- Jurcik, B., and Wang, H.-C. (1995). On the shape of impactor efficiency curves. J. Aerosol Sci., 26(7):1139–1147.
- Marjamäki, M., Keskinen, J., Chen, D.-R., and Pui, D. Y. (2000). Performance Evaluation of the Electrical Low-Pressure Impactor (ELPI). J. Aerosol Sci., 31(2):249–261.
- Marple, V. A., Rubow, K. L., Turner, W., and Spengler, J. D. (1987). Low Flow Rate Sharp Cut Impactors for Indoor Air Sampling: Design and Calibration. Japca, 37(11):1303–1307.
- Marple, V. A., and Willeke, K. (1976). Impactor Design. Atmos. Environ., 10(10):891–896.
- Rader, D. J., and Marple, V. A. (1985). Effect of Ultra-Stokesian Drag and Particle Interception on Impaction Characteristics. Aerosol Sci. Technol., 4(2):141–156.
- USEPA. (2013). Table F-4 to Subpart F of Part 53—Estimated Mass Concentration Measurement of PM2.5 for Idealized Coarse Aerosol Size Distribution. CFR40, Part 53, Subpart F. College Park, Maryland.