An artifact-minimizing method for total dust sampling and chemical characterization of industrial high-temperature aerosols

References

• Bankiewicz, D., Yrjas, P., and Hupa, M. (2009). High-Temperature Corrosion of Superheater Tube Materials Exposed to Zinc Salts. Energy Fuels, 23:3469–3474.
   Web of Science ®Google Scholar
• Brunner, T., Fluch, J., Obernberger, I., and Warnecke, R. (2013). Investigations of Aerosol Formation Pathways During MSW Combustion Based on High-Temperature Impactor Measurements. Fuel Process. Technol., 105:154–160.
   Web of Science ®Google Scholar
• Bryers, R. W. (1996). Fireside Slagging, Fouling, and High-Temperature Corrosion of Heat-Transfer Surface Due to Impurities in Steam-Raising Fuels. Prog. Energy Combust. Sci., 22:29–120.
   Web of Science ®Google Scholar
• Christensen, K. A., Stenholm, M., and Livbjerg, H. (1998). The Formation of Submicron Aerosol Particles, HCl and SO2 in Straw-Fired Boilers. J. Aerosol Sci., 29:421–444.
   Web of Science ®Google Scholar
• Deuerling, C., Maguhn, J., Nordsieck, H., Warnecke, R., and Zimmermann, R. (2010). Measurement System for Characterization of Gas and Particle Phase of High Temperature Combustion. Aerosol Sci. Technol., 44:1–9.
   Web of Science ®Google Scholar
• DIN EN ISO 10304. (2009). Water quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 1: Determination of Bromide, Chloride, Fluoride, Nitrate, Nitrite, Phosphate and Sulfate. https://www.beuth.de/de/norm/din-en-iso-10304-1/117316025
   Google Scholar
• DIN EN ISO 11885. (2009). Water Quality - Determination of Selected Elements by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). https://www.beuth.de/de/norm/din-en-iso-11885/118931490
   Google Scholar
• DIN EN 12341-1 (2014). Ambient Air - Standard Gravimetric Measurement Method for the Determination of the PM10 or PM2.5 Mass Concentration of Suspended Particulate Matter. https://www.beuth.de/de/norm/din-en-12341/195550191
   Google Scholar
• EN 13284-1. (2002). Stationary Source Emissions - Determination of Low Range Mass Concentration of Dust - Part 1: Manual Gravimetric Method. https://www.beuth.de/de/norm/din-en-13284-1/46953658
   Google Scholar
• Ewing, C. T., and Stern, K. H. (1974). Equilibrium Vaporization Rates and Vapor Pressures of Solid and Liquid Sodium Chloride, Potassium Chloride, Potassium Bromide, Cesium Iodide, and Lithium Fluoride. J. Phys. Chem., 78:1998–2005.
   Web of Science ®Google Scholar
• Gehrke, I. (2008). Metallische Mikrosiebe - Mikrotechnische Herstellung und filtertechnische Charakterisierung. Logos Verlag Berlin GmbH, Berlin.
   Google Scholar
• Glarborg, P., and Marshall, P. (2005). Mechanism and Modeling of the Formation of Gaseous Alkali Sulfates. Comb. Flame, 141:22–39.
   Web of Science ®Google Scholar
• Haugen, N. E. L., Kragset, S., Bugge, M., Warnecke, R., and Weghaus, M. (2013). MSWI Super Heater Tube Bundle: Particle Impaction Efficiency and Size Distribution. Fuel Process. Technol., 106:416–422.
   Web of Science ®Google Scholar
• Jiménez, S., and Ballester, J. (2005). A Comparative Study of Different Methods for the Sampling of High Temperature Combustion Aerosols. Aerosol Sci. Technol., 39:811–821.
   Web of Science ®Google Scholar
• Jiménez, S., and Ballester, J. (2005). Influence of Operating Conditions and the Role of Sulfur in the Formation of Aerosols from Biomass Combustion. Combust. Flame, 140:346–358.
   Web of Science ®Google Scholar
• Jiménez, S., and Ballester, J. (2007). Formation of Alkali Sulphate Aerosols in Biomass Combustion. Fuel, 86:486–493.
   Web of Science ®Google Scholar
• Kawahara, Y. (2002). High Temperature Corrosion Mechanisms and Effect of Alloying Elements for Materials Used in Waste Incineration Environment. Corros. Sci., 44:223–245.
   Web of Science ®Google Scholar
• Klein, C. L., Comero, S., Stahlmecke, B., Romazanov, J., Kuhlbusch, T. A. J., Van Doren, E., De Temmerman, P.-J., Mast, J., Wick, P., Krug, H., Locoro, G., Hund-Rinke, K., Kördel, W., Friedrichs, S., Maier, G., Werner, J., Linsinger, T., and Gawlik, B. M. (2011). NM-Series of Representative Manufactured Nanomaterials; NM-300 Silver Characterisation, Stability, Homogeneity. Publications Office of the European Union, Luxembourg, EUR 24693 EN, JRC 60709. http://publications.jrc.ec.europa.eu/repository/handle/JRC60709
   Google Scholar
• Lam, C. H., Ip, A. W., Barford, J. P., and McKay, G. (2010). Use of Incineration MSW Ash: A Review. Sustainability, 2:1943–1968.
   Google Scholar
• Lee, S.-H., Krumb, H., Themelis, N. J., and Castaldi, M. J. (2007). High-Temperature Corrosion in Waste-to-Energy Boilers. J. Therm. Spray Technol., 16:104–110.
   Web of Science ®Google Scholar
• Li, Y. S, and Spiegel, M. (2004). Models Describing the Degradation of FeAl and NiAl Alloys Induced by ZnCl2–KCl Melt at 400–450°C. Corros. Sci. 46:2009–2023.
   Web of Science ®Google Scholar
• Maguhn, J., Karg, E., Kettrup, A., and Zimmermann, R. (2003). On-Line Analysis of the Size Distribution of Fine and Ultrafine Aerosol Particles in Flue and Stack Gas of a Municipal Waste Incineration Plant: Effects of Dynamic Process Control Measures and Emission Reduction Devices. Environ. Sci. Technol., 37:4761–4770.
   PubMed Web of Science ®Google Scholar
• Michelsen, H. P., Frandsen, F., Dam-Johansen, K., and Larsen, O. H. (1998). Deposition and High Temperature Corrosion in a 10 MW Straw Fired Boiler. Fuel Process. Technol., 54:95–108.
   Web of Science ®Google Scholar
• Nielsen, H. P., Frandsen, F. J., Dam-Johansen, K., and Baxter, L. L. (2000). The Implications of Chlorine-Associated Corrosion on the Operation of Biomass-Fired Boilers. Prog. Energy Combust. Sci., 26:283–298.
   Web of Science ®Google Scholar
• Park, K., Kim, J. S., and Miller, A. L. (2009). A Study on Effects of Size and Structure on Hygroscopicity of Nanoparticles Using a Tandem Differential Mobility Analyzer and TEM. J. Nanopart. Res., 11:175–183.
   Web of Science ®Google Scholar
• Schmidt, F., Stahlmecke, B., Kaminski, H., and Finger, H. (2009). Characterisation of Soot as a Test Dust for Air Filters. Filtr. Sep. Int. Ed., 9:24–28.
   Google Scholar
• Schlumberger, S., and Bühler, J. (2013). Metallrückgewinnung aus Filterstäuben der thermischen Abfallbehandlung nach dem FLUREC-Verfahren. Aschen–Schlacken–Stäube aus Abfallverbrennung und Metallurgie, TK Verlag Karl Thomé-Kozmiensky, Neuruppin.
   Google Scholar
• Schumacher, S., Lindermann, J., Stahlmecke, B., Khot, A., Zeiner, T., van der Zwaag, T., Nordsieck, H., Warnecke, R., and Asbach, C. (2016). Particle Sampling in Boilers of Waste Incineration Plants for Characterizing Corrosion Relevant Species. Corros. Sci., 110:82–90.
   Web of Science ®Google Scholar
• Sippula, O., Koponen, T., and Jokiniemi, J. (2012). Behavior of Alkali Metal Aerosol in a High-Temperature Porous Tube Sampling Probe. Aerosol Sci. Technol., 46:1151–1162.
   Web of Science ®Google Scholar
• Sorell, G. (1997). The Role of Chlorine in High Temperature Corrosion in Waste-to-Energy Plants. Mater. High Temp., 14:207–220.
   Web of Science ®Google Scholar
• Spiegel, M., Zahs, A., and Grabke, H. J. (2003). Fundamental Aspects of Chlorine Induced Corrosion in Power Plants. Mater. High Temp., 20:153–159.
   Google Scholar
• Strand, M., Bohgard, M., Swietlicki, E., Gharibi, A., and Sanati, M. (2004). Laboratory and Field Test of a Sampling Method for Characterization of Combustion Aerosols at High Temperatures. Aerosol Sci. Technol., 38:757–765.
   Web of Science ®Google Scholar
• Terry, K. W. (1995). Particle Size Distribution of Airborne Dusts Using a Scanning Electron Microscope. Aerosol Sci. Technol., 23:475–478.
   Web of Science ®Google Scholar
• Tuoriniemi, J., Johnsson, A. C. J., Holmberg, J. P., Gustafsson, S., Gallego-Urrea, J. A., Olsson, E., Pettersson, J. B. C., and Hassellöv, M. (2014). Intermethod Comparison of the Particle Size Distributions of Colloidal Silica Nanoparticles. Sci. Technol. Adv. Mater., 15:035009.
   PubMed Web of Science ®Google Scholar
• Valmari, T., Kauppinen, E. I., Kurkela, J., Jokiniemi, J. K., Sfiris, G., and Revitzer, H. (1998). Fly Ash Formation and Deposition During Fluidized Bed Combustion of Willow. J. Aerosol Sci., 29:445–459.
   Web of Science ®Google Scholar
• Valmari, T., Lind, T. M., Kauppinen, E. I., Sfiris, G., Nilsson, K., and Maenhaut, W. (1999). Field Study on Ash Behavior During Circulating Fluidized-Bed Combustion of Biomass. 1. Ash Formation. Energy Fuels, 13:379–389.
   Web of Science ®Google Scholar
• Valmari, T., Lind, T. M., Kauppinen, E. I., Sfiris, G., Nilsson, K., and Maenhaut, W. (1999). Field Study on Ash Behavior During Circulating Fluidized-Bed Combustion of Biomass. 2. Ash Deposition and Alkali Vapor Condensation. Energy Fuels, 13:390–395.
   Web of Science ®Google Scholar
• Wall, C., Pohl, A., Knapp, M., Hahn, H., and Fichtner, M. (2014). Production of Nanocrystalline Lithium Fluoride by Planetary Ball-Milling. Powder Technol., 264:409–417.
   Web of Science ®Google Scholar
• Williams, P. T. (2005). Waste Treatment and Disposal. (2nd ed.). John Wiley & Sons, Chichester.
   Google Scholar
• Yang, J., Gebremedhin, A., and Strand, M. (2013). Characterization of Particles and Inorganic Vapors Through High-Temperature Extraction in a Biomass-Fired Grate Boiler. Energy Fuels, 27:5915–5922.
   Web of Science ®Google Scholar
• Yang, J., Lin, L., Morgalla, M., Gebremedhin, A., and Strand, M. (2015). High-Temperature Characterization of Inorganic Particles and Vapors in a Circulating Fluidized Bed Boiler Cofiring Wood and Rubber Waste. Energy Fuels, 29:863–871.
   Web of Science ®Google Scholar