Investigating particle emissions and aerosol dynamics from a consumer fused deposition modeling 3D printer with a lognormal moment aerosol model

References

• Adams, K., Bankston, J., Barlow, A., Holdren, M. W., Meyer, J., and Marchesani, V. J. (1999). Development of Emission Factors for Polypropylene Processing. J. Air Waste Manag. Assoc., 49(1):49–56. doi:10.1080/10473289.1999.10463782.
   PubMedGoogle Scholar
• ASTM. (2013). ASTM Standard D6670-13, Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products. American Society for Testing and Materials International, West Conshohocken, PA.
   Google Scholar
• Azimi, P., Fazli, T., and Stephens, B. (2017). Predicting Concentrations of Ultrafine Particles and Volatile Organic Compounds Resulting from Desktop 3D Printer Operation and the Impact of Potential Control Strategies. J. Ind. Ecol., 21(S1):S107–S109. doi:10.1111/jiec.12578.
   Google Scholar
• Azimi, P., Zhao, D., Pouzet, C., Crain, N. E., and Stephens, B. (2016). Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments. Environ. Sci. Technol., 50(3):1260–1268. doi:10.1021/acs.est.5b04983.
   PubMed Web of Science ®Google Scholar
• Bai, H., and Biswas, P. (1990). Deposition of Lognormally Distributed Aerosols Accounting for Simultaneous Diffusion, Thermophoresis and Coagulation. J. Aerosol Sci., 21(5):629–640. doi:10.1016/0021-8502(90)90118-H.
   Web of Science ®Google Scholar
• BAM, Federal Institute for Materials Research and Testing. (2012). Test Method for the Determination of Emissions from Hardcopy Devices within the Award of the Blue Angel Ecolabel for Equipment with Printing Function according to RAL-UZ-171. BAM, St. Augustin, Germany.
   Google Scholar
• Barrett, J. C., and Webb, N. A. (1998). A comparison of some approximate methods for solving the aerosol general dynamic equation. J. Aerosol Sci., 29(1–2):31–39. doi:10.1016/S0021-8502(97)00455-2.
   Web of Science ®Google Scholar
• Berman, B. (2012). 3-D Printing: The New Industrial Revolution. Bus. Horiz., 55(2):155–162. doi:10.1016/j.bushor.2011.11.003.
   Web of Science ®Google Scholar
• Bilde, M. and Pandis, S. N. (2001). Evaporation Rates and Vapor Pressures of Individual Aerosol Species Formed in the Atmospheric Oxidation of α- and β-Pinene. Environ. Sci. Technol., 35(16):3344–3349. doi:10.1021/es001946b.
   PubMed Web of Science ®Google Scholar
• Biswas, P., Li, X. M., and Pratsinis, S. E. (1989). Optical Wave-Guide Preform Fabrication – Silica Formation and Growth in a High-Temperature Aerosol Reactor. J. Appl. Phys., 65:2445–2450. doi:10.1063/1.342814.
   Web of Science ®Google Scholar
• Biswas, P., Lin, W. Y., and Wu, C. Y. (1992). Formation and Emission of Metallic Aerosols from Incinerators. J. Aerosol Sci., 23(Suppl. 1):273–276. doi:10.1016/0021-8502(92)90402-H.
   Google Scholar
• Biswas, P., Wu, C. Y., Zachariah, M. R., and McMillin, B. (1997). Characterization of Iron Oxide-Silica Nanocomposites in Flames: Part II. Comparison of Discrete-Sectional Model Predictions to Experimental Data. J. Mater. Res., 12(3):714–723. doi:10.1557/JMR.1997.0106.
   Web of Science ®Google Scholar
• Bradley, R. S., Bird, C. L., Jones, F. (1960). The Vapour Pressures and Heats of Sublimation of Some Disperse Dyes. Trans. Faraday Soc., 56:23–28. doi:10.1039/tf9605600023.
   Google Scholar
• Brown, D. P., Kauppinen, E. I., Jokiniemi, J. K., Rubin, S. G., Biswas, P. (2006). A Method of Moments Based CFD Model for Polydisperse Aerosol Flows with Strong Interphase Mass and Heat Transfer. Comput. Fluids., 35:762–780. doi:10.1016/j.compfluid.2006.01.012.
   Web of Science ®Google Scholar
• Chan, F., Rajaram, N., House, R., Kudla, I., Lipszyc, J., and Tarlo, S. M. (2017). Potential Respiratory Effects From 3-D Printing. Presented at the American Thoracic Society, Washington, DC.
   Google Scholar
• Chao, J., Lin, C. T., and Chung, T. H. (1983). Vapor Pressure of Coal Chemicals. J. Phys. Chem. Ref. Data., 12(4):1033–1063. doi:10.1063/1.555695.
   Web of Science ®Google Scholar
• Davis, A., Black, M., Zhang, Q., Wong, J., and Weber, R. (2016). Fine Particle and Chemical Emissions from Desktop 3D Printers. ASHRAE Annual Conference, St. Louis, MO.
   Google Scholar
• Deng, Y., Cao, S.-J., Chen, A., and Guo, Y. (2016). The Impact of Manufacturing Parameters on Submicron Particle Emissions from a Desktop 3D Printer in the Perspective of Emission Reduction. Build. Environ., 104:311–319. doi:10.1016/j.buildenv.2016.05.021.
   Web of Science ®Google Scholar
• ECMA. (2015). ECMA-328 Standard 7^th Edition, Determination of Chemical Emission Rates from Electronic Equipment. ECMA International, Geneva. www.ecma-international.org.
   Google Scholar
• EPA. (1988). Health and Environmental Effects Profile for Caprolactam. ECAO-CIN-G018. Environmental Criteria and Assessment Office, Office of Health and Environmental Assessment, Office of Research and Development. U. S. Environmental Protection Agency, Cincinnati, OH.
   Google Scholar
• Frenklach, M., and Harris, S. J. (1986). Aerosol Dynamics Modeling Using the Method of Moments. J. Colloid Interf. Sci., 118(1):252–261. doi:10.1016/0021-9797(87)90454-1.
   Web of Science ®Google Scholar
• Friedlander, S. K. (2000). Smoke, Dust and Haze: Fundamentals of Aerosol Dynamics. Oxford University Press, New York, NY.
   Google Scholar
• Gibson, I., Rosen, D. W., and Stucker, B. (2010). Additive Manufacturing Technologies. Springer US, Boston, MA.
   Google Scholar
• He, C., Morawska, L., and Taplin, L. (2007). Particle Emission Characteristics of Office Printers. Environ. Sci. Technol., 41(17):6039–6045. doi:10.1021/es063049z.
   PubMed Web of Science ®Google Scholar
• Hinds, W. C. (1999). Aerosol Technology: Properties, Behavior, and Measurement of Airborne Particles (2nd ed). Wiley, New York.
   Google Scholar
• Hoff, A., Jacobsson, S., Pfäffli, P., Zitting, A., and Frostling, H. (1982). Degradation Products of Plastics: Polyethylene and Styrene-Containing Thermoplastics—Analytical, Occupational and Toxicologic Aspects. Scand. J. Work Environ. Health., 8(2):1–60.
   PubMedGoogle Scholar
• House, R., Rajaram, N., and Tarlo, S. M. (2017). Case Report of Asthma Associated with 3D Printing. Occup. Med. (Lond.), 67(8):652–654. doi:10.1093/occmed/kqx129.
   Google Scholar
• Hulburt, H. M., and Katz, S. (1964). Some Problems in Particle Technology: A Statistical Mechanical Formulation. Chem. Eng. Sci., 19(8):555–574. doi:10.1016/0009-2509(64)85047-8.
   Web of Science ®Google Scholar
• Khatri, M., Bello, D., Gaines, P., Martin, J., Pal, A. K., Gore, R., and Woskie, S. (2013). Nanoparticles from Photocopiers Induce Oxidative Stress and Upper Respiratory Tract Inflammation in Healthy Volunteers. Nanotoxicology., 7(5):1014–1027. doi:10.3109/17435390.2012.691998.
   PubMed Web of Science ®Google Scholar
• Kim, Y., Yoon, C., Ham, S., Park, J., Kim, S., Kwon, O., and Tsai, P.-J. (2015). Emissions of Nanoparticles and Gaseous Material from 3D Printer Operation. Environ. Sci. Technol., 49(20):12044–12053. doi:10.1021/acs.est.5b02805.
   PubMed Web of Science ®Google Scholar
• Koivisto, A. J., Hussein, T., Niemelä, R., Tuomi, T., and Hämeri, K. (2010). Impact of particle emissions of new laser printers on modeled office room. Atmos. Environ., 44(17):2140–2146. doi:10.1016/j.atmosenv.2010.02.023.
   Web of Science ®Google Scholar
• Kommu, S., Khomami, B., and Biswas, P. (2004). Simulation of Aerosol Dynamics and Transport in Chemically Reacting Particulate Matter Laden Flows. Part II: Application to CVD Reactors. Chem. Eng. Sci., 59:359–371. doi:10.1016/j.ces.2003.05.010.
   Web of Science ®Google Scholar
• McGraw, R. (1997). Description of Aerosol Dynamics by the Quadrature Method of Moments. Aerosol Sci. Technol., 27(2):255–265. doi:10.1080/02786829708965471.
   Web of Science ®Google Scholar
• Ng, N. L., Herndon, S. C., Trimborn, A., Canagaratna, M. R., Croteau, P. L., Onash, T. B., Sueper, D., Worsnop, D. R., Zhang, Q., Sun, Y. L., and Jayne, J. T. (2011). An Aerosol Chemical Speciation Monitor (ACSM) for Routine Monitoring of the Composition and Mass Concentration of Ambient Aerosol. Aerosol Sci. Tech., 45(7):780–794. doi:10.1080/02786826.2011.560211.
   Web of Science ®Google Scholar
• Pankow, J. F., Seinfeld, J. H., Asher, W. E., and Erdakos, G. B. (2001). Modeling the Formation of Secondary Organic Aerosol. 1. Application of Theoretical Principles to Measurements Obtained in the α-Pinene/, β-Pinene/, Sabinene/, Δ 3 -Carene/, and Cyclohexene/Ozone Systems. Environ. Sci. Technol., 35(6):1164–1172. doi:10.1021/es001321d.
   PubMed Web of Science ®Google Scholar
• Pirela, S., Molina, R., Watson, C., Cohen, J., Bello, D., Demokritou, P., and Brain, J. (2013). Effects of Copy Center Particles on the Lungs: A Toxicological Characterization Using a Balb/c Mice Model. Inhal. Toxicol., 25(9):498–508. doi:10.3109/08958378.2013.806614.
   PubMed Web of Science ®Google Scholar
• Pratsinis, S. E. (1988). Simultaneous Nucleation, Condensation, and Coagulation in Aerosol Reactors. J. Colloid Interf. Sci., 124(2):416–427. doi:10.1016/0021-9797(88)90180-4.
   Web of Science ®Google Scholar
• Pratsinis, S. E., Kodas, T. T., Dudukovic, M. P., and Friedlander, S. K. (1986). Aerosol Reactor Design: Effect of Reactor Type and Process Parameters on Product Aerosol Characteristics. Ind. Eng. Chem. Proc. DD., 25(3):634–642. doi:10.1021/i200034a007.
   Google Scholar
• Rutkowski, J. V., and Levin, B. C. (1986). Acrylonitrile–Butadiene–Styrene Copolymers (ABS): Pyrolysis and Combustion Products and Their Toxicity—A Review of the Literature. Fire Mater., 10(3–4):93–105. doi:10.1002/fam.810100303.
   Web of Science ®Google Scholar
• Salthammer, T., Schripp, T., Uhde, E., and Wensing, M. (2012). Aerosols Generated by Hardcopy Devices and Other Electrical Appliances. Environ. Pollut., 169:167–174. doi:10.1016/j.envpol.2012.01.028.
   PubMed Web of Science ®Google Scholar
• Scungio, M., Vitanza, T., Stabile, L., Buonanno, G., Morawska, L. (2017). Characterization of Particle Emission from Laser Printers. Sci. Total Environ., 586:623–630. doi:10.1016/j.scitotenv.2017.02.030.
   PubMed Web of Science ®Google Scholar
• Seigneur, C., Hudischewskyj, A. B., Seinfeld, J. H., Whitby, K. T., Whitby, E. R., Brock, J. R., and Barnes, H. M. (1986). Simulation of Aerosol Dynamics: A Comparative Review of Mathematical Models. Aerosol Sci. Technol., 5(2):205–222. doi:10.1080/02786828608959088.
   Web of Science ®Google Scholar
• Seinfeld, J. H., Erdakos, G. B., Asher, W. E., and Pankow, J. F. (2001). Modeling the Formation of Secondary Organic Aerosol (SOA). 2. The Predicted Effects of Relative Humidity on n Formation in the α-pinene-, β-Pinene-, Sabinene-, Δ3-Carene-, and Cyclohexene-Ozone Systems. Environ. Sci. Technol., 35(9):1806–1817. doi:10.1021/es001765+.
   PubMed Web of Science ®Google Scholar
• Seinfeld, J. H., and Pandis, S. N. (2006). Atmospheric Chemistry and Physics. John Wiley & Sons, Inc, Hoboken, NJ.
   Google Scholar
• Sethi, V., and Biswas, P. (1990). Modeling of Particle Formation and Dynamics in a Flame Incinerator. J. Air Waste Manage. Assoc., 40:42–46. doi:10.1080/10473289.1990.10466664.
   Web of Science ®Google Scholar
• Stabile, L., Scungio, M., Buonanno, G., Arpino, F., and Ficco, G. (2017). Airborne Particle Emission of a Commercial 3D Printer: The Effect of Filament Material and Printing Temperature. Indoor Air., 27:398–408. doi:10.1111/ina.12310.
   PubMed Web of Science ®Google Scholar
• Stefaniak, A. B., LeBouf, R. F., Yi, J., Ham, J., Nurkewicz, T., Schwegler-Berry, D. E., Chen, B. T., Wells, J. R., Duling, M. G., Lawrence, R. B., Martin Jr., S. B., Johnson, A. R., and Virji, M. A. (2017). Characterization of Chemical Contaminants Generated by a Desktop Fused Deposition Modeling 3-Dimensional Printer. J. Occup. Environ. Hyg., 14(7):540–550. doi:10.1080/15459624.2017.1302589.
   PubMed Web of Science ®Google Scholar
• Stein, S. E. “Mass Spectra” in NIST Chemistry WebBook, NIST Standard Reference Database Number 69, Eds. P. J. Linstrom and W. G. Mallard, p. 20899: National Institute of Standards and Technology, Gaithersburg, MD. doi:10.18434/T4D303, (retrieved January 15, 2016).
   Google Scholar
• Steinle, P. (2016). Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings. J. Occup. Environ. Hyg., 13(2):121–132. doi:10.1080/15459624.2015.1091957.
   PubMed Web of Science ®Google Scholar
• Stephens, B., Azimi, P., El Orch, Z., and Ramos, T. (2013). Ultrafine Particle Emissions from Desktop 3D Printers. Atmos. Environ., 79:334–339. doi:10.1016/j.atmosenv.2013.06.050.
   Web of Science ®Google Scholar
• Tao, Y., and McMurry, P. H. (1989). Vapor Pressures and Surface Free Energies of C14-C18 Monocarboxylic Acids and C5 and C6 Dicarboxylic Acids. Environ. Sci. Technol., 23(12):1519–1523. doi:10.1021/es00070a011.
   Web of Science ®Google Scholar
• Tobias, H. J., and Ziemann, P. J. (2000). Thermal Desorption Mass Spectrometric Analysis of Organic Aerosol Formed from Reactions of 1-Tetradecene and O3 in the Presence of Alcohols and Carboxylic Acids. Environ. Sci. Technol., 34(11):2105–2115. doi:10.1021/es9907156.
   Web of Science ®Google Scholar
• Tsang, T. H., Cook, S. M., and Marra, M. E. (1990). Dynamic Behavior of Condensation and Evaporation of Polydisperse Volatile Aerosols. Aerosol Sci. Technol., 12(2):386–398. doi:10.1080/02786829008959354.
   Web of Science ®Google Scholar
• UL. (2013). UL 2819, GREENGUARD Certification for Chemical and Particle Emissions for Electronic Equipment. Underwriters Laboratories, Marietta, GA.
   Google Scholar
• UL. (2014). UL 2823, GREENGUARD Certification Program Method for Measuring and Evaluating Chemical and Particle Emissions from Electronic Equipment Using Dynamic Environmental Chambers. Underwriters Laboratories, Northbrook, IL.
   Google Scholar
• Vance, M. E., Pegues, V., Van Montfrans, S., Leng, W., and Marr, L. C. (2017). Aerosol Emissions from Fused-Deposition Modeling 3D Printers in a Chamber and in Real Indoor Environments. Environ. Sci. Technol., 51:9516–9523. doi:10.1021/acs.est.7b01546.
   PubMed Web of Science ®Google Scholar
• Wang, Z. -M., and Biswas, P. (2000). Nickel Speciation and Aerosol Formation during Combustion of Kerosene Doped with Nickel Nitrate Aerosol in a Premixed Burner. Aerosol. Sci. Tech., 33(6):525–535. doi:10.1080/02786820050195368.
   Web of Science ®Google Scholar
• Warren, D. R., and Seinfeld, J. H. (1984). Nucleation and Growth of Aerosol From a Continuously Reinforced Vapor. Aerosol Sci. Technol., 3(2):135–153. doi:10.1080/02786828408959003.
   Web of Science ®Google Scholar
• Wu, C. -Y., and Biswas, P. (1998). Study of Numerical Diffusion in a Discrete-Sectional Model and Its Application to Aerosol Dynamics Simulation. Aerosol Sci. Technol., 29:259–378. doi:10.1080/02786829808965576.
   Web of Science ®Google Scholar
• Wu, C-Y., and Biswas, P. (2000). Lead Species Aerosol Formation and Growth in Multicomponent High-Temperature Environments. Environ. Eng. Sci., 17(1):41–60. doi:10.1089/ees.2000.17.41.
   Web of Science ®Google Scholar
• Wu, Y., Eichler, C. M. A., Chen, S., and Little, J. C. (2016). Simple Method To Measure the Vapor Pressure of Phthalates and Their Alternatives. Environ. Sci. Technol., 50(18):10082–10088. doi:10.1021/acs.est.6b02643.
   PubMed Web of Science ®Google Scholar
• Yi, J., LeBouf, R. F., Duling, M. G., Nurkiewicz, T., Chen, B. T., Schwegler-Berry, D., Virji, M. A., and Stefaniak, A. B. (2016). Emission of Particulate Matter from a Desktop Three-Dimensional (3D) Printer. J. Toxicol. Env. Health. Part A., 79(11):453–465. doi:10.1080/15287394.2016.1166467.
   PubMed Web of Science ®Google Scholar
• Yoon, H. I., Hong, Y-C., Cho, S-H., Kim, H., Kim, Y. H., Sohn, J. R., Kwon, M., Park, S-H., Cho, M-H., and Cheong, H-K. (2010). Exposure to Volatile Organic Compounds and Loss of Pulmonary Function in the Elderly. Eur. Respir. J., 36(6):1270–1276. doi:10.1183/09031936.00153509.
   PubMed Web of Science ®Google Scholar
• Yu, M., Lin, J., and Chan, T. (2008). A New Moment Method for Solving the Coagulation Equation for Particles in Brownian Motion. Aerosol Sci. Technol., 42(9):705–713. doi:10.1080/02786820802232972.
   Web of Science ®Google Scholar
• Yu, M., and Liu, Y. (2016). Methods of Moments for Resolving Aerosol Dynamics. In K. Volkov (Ed.), Aerosols – Science and Case Studies. InTech.
   Google Scholar
• Zhang, Q., Wong, J. P. S., Davis, A. Y., Black, M. S., and Weber, R. J. (2017). Characterization of Particle Emissions from Consumer Fused Deposition Modeling 3D Printers. Aerosol Sci. Technol., 51(11):1275–1286. doi:10.1080/02786826.2017.1342029.
   Web of Science ®Google Scholar
• Zontek, T. L., Ogle, B. R., Jankovic, J. T., and Hollenbeck, S. M. (2017). An Exposure Assessment of Desktop 3D Printing. J. Chem. Health Saf., 24(2):15–25. doi:10.1016/j.jchas.2016.05.008.
   Web of Science ®Google Scholar
• Zukas, V., and Zukas, J. A. (2015). An Introduction to 3D Printing. First Edition Design Publishing, Sarasota, FL.
   Google Scholar