References
- Adamson, A. W. , and J. Klerer . 1977. Physical chemistry of surfaces. J. Electrochem. Soc. 124 (5):192C. doi:https://doi.org/10.1149/1.2133374.
- Amaral, S. S. , J. A. Carvalho , M. A. M. Costa , and C. Pinheiro . 2016. Particulate matter emission factors for biomass combustion. Atmosphere 7 (11):141.
- Barthel, E. 2008. Adhesive elastic contacts: JKR and more. J. Phys. D: Appl. Phys. 41 (16):163001. doi:https://doi.org/10.1088/0022-3727/41/16/163001.
- Le Blond, J. S. , S. Woskie , C. J. Horwell , and B. J. Williamson . 2017. Particulate matter produced during commercial sugarcane harvesting and processing: A respiratory health hazard? Atmos. Environ . 149:34–46. doi:https://doi.org/10.1016/j.atmosenv.2016.11.012.
- Booth, S. W. , and J. M. Newton . 1987. Experimental investigation of adhesion between powders and surfaces. J. Pharm. Pharmacol. 39 (9):679–684. doi:https://doi.org/10.1111/j.2042-7158.1987.tb06969.x.
- Brandrup, J. , E. H. Immergut , and E. A. Grulke . 1999. Polymer handbook . 4rd ed. Wiley.
- Cheng, W. , P. F. Dunn , and R. M. Brach . 2002. Surface roughness effects on microparticle adhesion. Journal Adhesion 78 (11):929–965. doi:https://doi.org/10.1080/00218460214510.
- Ciavarella, M. , J. Joe , A. Papangelo , and J. R. Barber . 2019. The role of adhesion in contact mechanics. J. R. Soc. Interface 16 (151):20180738. doi:https://doi.org/10.1098/rsif.2018.0738.
- Derjaguin, B. , V. Muller , and Y. Toporov . 1975. Effect of contact deformations on the adhesion of particles. J. Colloid Interface Sci . 53 (2):314–326. doi:https://doi.org/10.1016/0021-9797(75)90018-1.
- Egermann, H. 1980. Effects of adhesion on mixing homogeneity part I: Ordered adhesion—random adhesion. Powder Technol. 27 (2):203–206. doi:https://doi.org/10.1016/0032-5910(80)85023-6.
- Felicetti, M. A. , F. Piantino , J. R. Coury , and M. L. Aguiar . 2008. Influence of removal time and particle size on the particle substrate adhesion force. Braz. J. Chem. Eng. 25 (1):71–82. doi:https://doi.org/10.1590/S0104-66322008000100009.
- Felicetti, M. A. , G. R. Salazar-Banda , J. R. Coury , and M. L. Aguiar . 2009. Influence of particle size, applied compression, and substratum material on particle − surface adhesion force using the centrifuge technique. Ind. Eng. Chem. Res. 48 (2):877–887. doi:https://doi.org/10.1021/ie071506u.
- Fillingham, P. , K. Kottapalli , X. Zhan , and I. V. Novosselov . 2019. Characterization of adhesion force in aerodynamic particle resuspension. J. Aerosol Sci . 128:89–98. doi:https://doi.org/10.1016/j.jaerosci.2018.11.006.
- Glass, A. S. , and J. W. Larsen . 1994. Coal surface properties. specific and nonspecific interactions for polar molecules and surface tensions for hydrocarbons at the surface of illinois no. 6 coal. Energy Fuels 8 (3):629–636. doi:https://doi.org/10.1021/ef00045a018.
- Götzinger, M. , and W. Peukert . 2003. Dispersive forces of particle–surface interactions: Direct AFM measurements and modelling. Powder Technol. 130 (1–3):102–109. doi:https://doi.org/10.1016/S0032-5910(02)00234-6.
- Hamaker, H. C. 1937. The London—van Der Waals attraction between spherical particles. Physica 4 (10):1058–1072. doi:https://doi.org/10.1016/S0031-8914(37)80203-7.
- Imran, M. , and A. R. Anwar Khan . 2018. Characterization of agricultural waste sugarcane bagasse ash at 1100 °C with various hours. In Materials Today: Proceedings 5 (2):3346–3352. doi:https://doi.org/10.1016/j.matpr.2017.11.577.
- Israelachvili, J. 2011. Intermolecular and surface forces. Intermolecular and surface forces . USA: Academic Press. doi:https://doi.org/10.1016/C2011-0-05119-0
- James, J. , and P. K. Pandian . 2017. A short review on the valorisation of sugarcane bagasse ash in the manufacture of stabilized/sintered earth blocks and tiles. Adv. Mater. Sci. Eng . 2017:1–15. doi:https://doi.org/10.1155/2017/1706893.
- Johnson, K. L. , L. K. Kendal , and A. D. Roberts . 1971. Surface energy and the contact of elastic solids. Proc. R. Soc. Lond. A 324 (1558):301–313. doi:https://doi.org/10.1098/rspa.1971.0141.
- Karmouch, R. , and H. E. Hor . 2017. Solar cells performance reduction under the effect of dust in Jazan Region. J. Fundam. Renewable Energy Appl . 07 (02):1–4. doi:https://doi.org/10.4172/2090-4541.1000228.
- Kendall, K. , and C. Stainton . 2001. Adhesion and aggregation of fine particles. Powder Technol. 121 (2–3):223–229. doi:https://doi.org/10.1016/S0032-5910(01)00386-2.
- Lam, K. K. , and J. M. Newton . 1991. Investigation of applied compression on the adhesion of powders to a substrate surface. Powder Technol. 65 (1–3):167–175. doi:https://doi.org/10.1016/0032-5910(91)80179-M.
- Lam, K. K. , and J. M. Newton . 1992. Influence of particle size on the adhesion behaviour of powders, after application of an initial press-on force. Powder Technol. 73 (2):117–125. doi:https://doi.org/10.1016/0032-5910(92)80072-5.
- Lam, K. K. , and J. M. Newton . 1993. The influence of the time of application of contact pressure onparticle adhesion to a substrate surface. Powder Technol. 76 (2):149–154. doi:https://doi.org/10.1016/S0032-5910(05)80022-1.
- Marti, O. 2000. Measurement of adhesion and pull-off forces with the AFM. In Modern tribology Handbook: Volume one: Principles of tribology . Boca Raton, FL: CRC Press. http://www.crcnetbase.com/doi/abs/10.1201/9780849377877.ch17.
- Moeller, R.-S. , and H. Nirschl . 2017. Adhesion and cleanability of surfaces in the baker’s trade. J. Food Eng . 194:99–108. doi:https://doi.org/10.1016/j.jfoodeng.2016.09.012.
- Nguyen, T. T. , C. Rambanapasi , A. H. de Boer , H. W. Frijlink , P. M. V. D. Ven , J. de Vries , H. J. Busscher , and K. v D. V. Maarschalk . 2010. A Centrifuge method to measure particle cohesion forces to substrate surfaces: The use of a force distribution concept for data interpretation. Int. J. Pharm . 393 (1–2):89–96. doi:https://doi.org/10.1016/j.ijpharm.2010.04.016.
- Nussinovitch, A. 2017. Adhesion in foods: Fundamental principles and applications . Chichester: John Wiley & Sons, Ltd.
- Payá, J. , J. Monzó , M. V. Borrachero , L. Díaz-Pinzón , and L. M. Ordónez . 2002. Sugar-Cane Bagasse Ash (SCBA): Studies on its properties for reusing in concrete production. J. Chem. Technol. Biotechnol. 77 (3):321–325. doi:https://doi.org/10.1002/jctb.549.
- Petean, P. G. C. , and M. L. Aguiar . 2015. Determining the adhesion force between particles and rough surfaces. Powder Technol. 274 (1):67–76. doi:https://doi.org/10.1016/j.powtec.2014.12.047.
- Pietsch, W. 2004. Agglomeration in industry: Occurrence and applications . Weinheim, DE: Wiley-VCH Verlag GmbH &. Co. KGaA.
- Podczeck, F. 1998. Particle-particle adhesion in pharmaceutical powder handling . London: World Scientific Publishing Ltd. https://www.worldscientific.com/worldscibooks/10.1142/p095
- Podczeck, F. , and J. M. Newton . 1995. Development of an ultracentrifuge technique to determine the adhesion and friction properties between particles and surfaces. J. Pharm. Sci . 84 (9):1067–1071. doi:https://doi.org/10.1002/jps.2600840907.
- Podczeck, F. , J. M. Newton , and M. B. James . 1997. Influence of relative humidity of storage air on the adhesion and autoadhesion of micronized particles to particulate and compacted powder surfaces. J. Colloid Interface Sci . 187 (2):484–491. doi:https://doi.org/10.1006/jcis.1996.4684.
- Prokopovich, P. , and V. Starov . 2011. Adhesion models: From single to multiple asperity contacts. Adv. Colloid Interface Sci . 168 (1–2):210–222. doi:https://doi.org/10.1016/j.cis.2011.03.004.
- Rumpf, H. 1977. Particles adhesion. In Agglomeration 77 , ed. K. V. S. Sastra , vol. 1, 97–129. New York: American Institute of Mining, Metallurgical and Petroleum Engineers.
- Salazar-Banda, G. R. , M. A. Felicetti , J. A. S. Gonçalves , J. R. Coury , and M. L. Aguiar . 2007. Determination of the adhesion force between particles and a flat surface, using the centrifuge technique. Powder Technol. 173 (2):107–117. doi:https://doi.org/10.1016/j.powtec.2006.12.011.
- Teixeira, S. R. , A. Arenales , A. E. Souza , R. Silva Magalhães , A. F. V. Peña , D. Aquino , and R. Freire . 2015. Sugarcane bagasse: Applications for energy production and ceramic materials. J. Solid Waste Technol. Mngmnt . 41 (3):229–238. doi:https://doi.org/10.5276/JSWTM.2015.229.
- Tighe, B. J. , and A. Mann . 2011. Adhesives and interfacial phenomena in wound healing. In Advanced Wound Repair Therapies , 247–83. Sawston, Cambridge: Woodhead Pub. Ltd.
- Torres Agredo, J. , R. M. de Gutiérrez , C. E. Escandón Giraldo , and L. O. González Salcedo . 2014. Characterization of sugar cane bagasse ash as supplementary material for portland cement. Inginv. 34 (1):5–10. doi:https://doi.org/10.15446/ing.investig.v34n1.42787.
- Ulusoy, U. 2008. Application of ANOVA to image analysis results of talc particles produced by different milling. Powder Technol. 188 (2):133–138. doi:https://doi.org/10.1016/j.powtec.2008.04.036.
- Wu, S. 2017. Polymer interface and adhesion . New York: Routledge. https://www.taylorfrancis.com/books/9781351423533.
- Zafar, U. , C. Hare , A. Hassanpour , and M. Ghadiri . 2014. Drop test: A new method to measure the particle adhesion force. Powder Technol. 264:236–241. doi:https://doi.org/10.1016/j.powtec.2014.04.022.
- Zimon, A. D. 1982. Adhesion of dust and powder. 2nd ed. New York: Consultants Bureau.