483
Views
39
CrossRef citations to date
0
Altmetric
Original Articles

The Effects of Turbulence on the Entry of Airborne Particles into a Blunt Dust Sampler

, &
Pages 17-29 | Received 23 Jan 1984, Accepted 11 May 1984, Published online: 06 Jun 2007

REFERENCES

  • Addlesee , A. J. ( 1980 ). Anisokinetic sampling of aerosols at a slot intake, J. Aerosol Sci. 11 : 483 – 493 .
  • Baines , W. D. and Peterson , E. G. ( 1951 ). An investigation of flow through screens. Trans. A.S.M.E. 73 : 467 – 480 .
  • Comte-Bellot , G. and Corrsin , S. ( 1966 ). The use of a contraction to improve the isotropy of grid-generated turbulence, J. Fluid Mech. 25 : 657 – 682 .
  • Humphries , W. and Vincent , J. H. ( 1976 ). An experimental investigation of the detention of airborne smoke in the wake bubble behind a disc. J. Fluid Mech. 73 : 453 – 464 .
  • Humphries , W. and Vincent , J. H. ( 1978 ). Transport of airborne dusts in the near wakes of bluff bodies. Chem. Eng. Sci. 33 : 1141 – 1146 .
  • Jayasekera , P. N. and Davies , C. N. ( 1980 ). Aspiration below wind velocity of aerosols with sharp-edged nozzles facing the wind. J. Aerosol Sci. 11 : 535 – 547 .
  • McFarland , A. R. , Wedding , J. B. , and Cermak , J. E. ( 1977 ). Wind tunnel evaluation of a modified Andersen impactor and an all-weather sampling inlet. Atmos. Environ. 11 : 535 – 539 .
  • Mark , D. , Vincent , J. H. , and Witherspoon , W. A. ( 1982 ). Particle blow-off: A source of error in blunt dust samplers. Aerosol Sci. Technol. 1 : 463 – 469 .
  • May , K. R. ( 1966 ). Spinning top homogeneous aerosol generator with shockproof mounting. J. Sci. In-strum. 43 : 841 – 842 .
  • Ogden , T. L. , Birkett , J. L. and Gibson , H. ( 1977 ). Improvements to dust measuring technique . Institute of Occupational Medicine , Rep. No. TM/77/11, Edinburgh, Scotland .
  • Ogden , T. L. and Birkett , J. L. ( 1978 ). An inhalable-dust sampler for measuring the hazard from total airborne particulate. Ann. Occup. Hyg. 21 : 41 – 50 .
  • Ralph , M. O. , Barrett , C. F. , and Upton , S. L. ( 1982 ). A wind tunnel study of the inlet efficiency of a Warren Spring Laboratory suspended particle sampler . Department of Industry (Warren Spring Laboratory, Stevenage) , Rep. No. LR 420 (AP).
  • Soo , S. L. ( 1967 ). Fluid Dynamics of Multiphase Systems. Blaisdell , Waltham, Mass.
  • Tennekes , H. and Lumley , J. L. ( 1972 ). A First Course in Turbulence. The MIT Press , Cambridge, Mass.
  • Vincent , J. H. ( 1984 ). A comparison between models for predicting the performances of blunt dust samplers. Atmos. Environ. 18 : 1033 – 1035 .
  • Vincent , J. H. and Armbruster , L. ( 1981 ). On the quantitative definition of the inhalability of airborne dust. Ann. Occup. Hyg. 24 : 245 – 248 .
  • Vincent , J. H. and Gibson , H. ( 1981 ). Sampling errors in blunt dust samplers arising from external wall loss effects. Atmos. Environ. 15 : 703 – 712 .
  • Vincent , J. H. , Hutson , D. , and Mark , D. ( 1982 ). The nature of air flow near the inlets of blunt dust sampling probes. Atmos. Environ. 16 : 1243 – 1249 .
  • Vincent , J. H. and Mark , D. ( 1982 ). Application of blunt sampler theory to the definition and measurement of inhalable dust . In Inhaled Particles V ( W. H. Walton , Ed. ), Pergamon Press , Oxford, U.K., pp. 3 – 19 .
  • Vincent , J. H. , Mark , D. , Gibson , H. , Botham , R. A. , Emmett , P. C. , Witherspoon , W. A. , Aitken , R. J. , Jones , C. O. , and Miller , B. ( 1983 ). Measurement of inhalable dust in wind conditions pertaining to mines . Institute of Occupational Medicine , Report No. TM/83/7, Edinburgh, Scotland.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.