Mathematical modelling of wustite pellet reduction: grain model in comparison with USCM

References

• L. von Bogdandy and H. J. Engell: ‘The reduction of iron ores’; 1971, Berlin, Springer.
   Google Scholar
• W. M. McKewan: ‘Influence movement during high pressure reaction of hematite by hydrogen’, J. Met., 1964, 16, 781–802.
   Google Scholar
• E. T. Turkdogan and J. V. Vinters: ‘Gaseous reduction of iron oxides: part I. Reduction of hematite in hydrogen’, Met. Trans., 1971, 2, 3175–3188. doi: 10.1007/BF02814970
   Web of Science ®Google Scholar
• T. Usui, M. Ohmi and E. Yamamura: ‘Analysis of rate of hydrogen reduction of porous wustite pellets basing on zone-reaction models’, ISIJ Int., 1990, 30, 347–355. doi: 10.2355/isijinternational.30.347
   Web of Science ®Google Scholar
• M. S. Valipour and B. Khoshandam: ‘Numerical modelling of non-isothermal reduction of porous wustite pellet with syngas’, Ironmak. Steelmak., 2009, 36, (2), 91–96. doi: 10.1179/174328108X380681
   Web of Science ®Google Scholar
• J. Szekely and Y. El-Tawil: ‘The reduction of hematite pellets with carbon monoxide-hydrogen mixtures’, Met. Trans. B, 1976, 7, (3), 490–492. doi: 10.1007/BF02652723
   Web of Science ®Google Scholar
• Q. T. Tsay, W. H. Ray and J. Szekely: ‘The modeling of hematite reduction with hydrogen plus carbon monoxide mixtures’, AIChE J., 1976, 22, 1064–1072. doi: 10.1002/aic.690220617
   Web of Science ®Google Scholar
• E. K. T. Kam and R. Hughes: ‘A model for the direct reduction of iron ore by mixtures of hydrogen and carbon monoxide in a moving bed’, Trans. IChmE, 1981, 59, 196–206.
   Google Scholar
• M. S. Valipour, M. Y. M. Hashemi and Y. Saboohi: ‘Mathematical modeling of the reaction in an iron ore pellet using a mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: an isothermal study’, Adv. Powder Technol., 2006, 17, (3), 277–295. doi: 10.1163/156855206777213375
   Web of Science ®Google Scholar
• W. M. McKewan: ‘Reduction kinetics of hematite in hydrogen–water vapor–nitrogen mixtures’, Trans. Met. Soc. AIME, 1962, 224, 2–5.
   Google Scholar
• R. H. Spitzer and F. S. Manning: ‘Mixed control reaction kinetics in the gaseous reduction of hematite’, Trans. Met. Soc. AIME, 1963, 23, 6726–6742.
   Google Scholar
• E. D. Negri, O. M. Alfano and M. G. Chiovetta: ‘Direct reduction of hematite in a moving-bed reactor. Analysis of the water gas shift reaction effects on the reactor behavior’, Ind. Eng. Chem. Res., 1991, 30, 474–482. doi: 10.1021/ie00051a007
   Web of Science ®Google Scholar
• J. Szekely, J. W. Evans, H. Y. Sohn: ‘Gas–solid reactions’; 1976, New York, Academic Press.
   Google Scholar
• M. S. Valipour and M. H. Mokhtari: ‘Effect of water gas shift reaction on the non-isothermal reduction of wustite porous pellet using syngas’, Int. J. ISSI, 2011, 8, (2), 9–15.
   Google Scholar
• M. S. Valipour: ‘Mathematical modeling of a non-catalytic gas–solid reaction: hematite pellet reduction with syngas’, Sci. Iran., 2009, 16, (2), 108–124.
   Web of Science ®Google Scholar
• T. Melchiori and P. Canu: ‘Improving the quantitative description of reacting porous solids: critical analysis of the shrinking core model by comparison to the generalized grain model’, Ind. Eng. Chem. Res., 2014, 53, (22), 8980–8995. doi: 10.1021/ie403030g
   Web of Science ®Google Scholar
• S. S. E. H. Elnashaie and S. S. Elshishini: ‘Modeling, simulation and optimization of industrial fixed bed catalytic reactors’; 1994, London, Gordon & Breach.
   Google Scholar
• M. S. Valipour and Y. Saboohi: ‘Modeling of multiple noncatalytic gas–solid reactions in a moving bed of porous pellets based on finite volume method’, Heat Mass Transfer, 2007, 43, 881–894. doi: 10.1007/s00231-006-0154-2
   Web of Science ®Google Scholar
• T. Akiyama, R. Takahashi, J. Yagi: ‘Measurements of heat transfer coefficients between gas and particles for a single sphere and for moving beds’, ISIJ Int., 1993, 33, 703–710. doi: 10.2355/isijinternational.33.703
   Web of Science ®Google Scholar
• W. Schotte: ‘Thermal conductivity of packed beds’, AIChE J., 1960, 6, 63–67. doi: 10.1002/aic.690060113
   Web of Science ®Google Scholar
• G. H. Geiger and D. R. Poirier: ‘Transport phenomena in metallurgy’; 1980, New York, Addison-Wesley.
   Google Scholar
• S. Sun and W. K. Lu: ‘Mathematical modeling of reactions in iron ore/coal composites’, ISIJ Int., 1993, 33, 1062–1069. doi: 10.2355/isijinternational.33.1062
   Web of Science ®Google Scholar
• H. K. Versteeg and W. Malalasekera: ‘An introduction to computational fluid dynamics: the finite volume method’; 1995, New York, John Wiley & Sons, Inc.
   Google Scholar
• Y. Hara, M. Sakawa and S. Kondo: ‘Mathematical model of the shaft furnace for reduction of iron ore pellet’, Tetsu-to-Hagane, 1976, 62, 315–323.
   Google Scholar