Thermodynamic study of evolution of sinter phases at different alumina level

References

• A. K. Saha: ‘Crustal evolution of Singhbhum North Orissa, Eastern India’, 341, 1994, Bangalore, Memoirs Geological Society of India.
   Google Scholar
• M. Sinha, S. H. Nistala, S. Chandra, and T. R. Mankhand: ‘Mineralogy of iron ores of different alumina levels from Singhbhum belt and their implication on sintering process’, J. Miner. Mater. Charact. Eng., 2015, 3, 14.
   Google Scholar
• C. Chen, L. Zhang, L. Lu, and S. Sun: ‘Thermodynamic calculation of liquidus surface of FeOx–CaO–SiO2 System’, ISIJ Int., 2010, 50, (11), 1523–1531. doi: 10.2355/isijinternational.50.1523
   Web of Science ®Google Scholar
• H. Kimura, T. Ogawa, M. Kakki, A. Matsumoto, and F. Tsukihashi: ‘Effect of Al2O3 and MgO additions on liquidus for the CaO–SiO2–FeOx system at 1573 K’, ISIJ Int., 2005, 45, (4), 506–512. doi: 10.2355/isijinternational.45.506
   Web of Science ®Google Scholar
• X. Lv, C. Bai, Q. Deng, X. Huang, and G. Qiu: ‘Behavior of liquid phase formation during iron ores sintering’, ISIJ Int., 2011, 51, (5), 722–727. doi: 10.2355/isijinternational.51.722
   Web of Science ®Google Scholar
• H. M. Henao, F. Kongoli, and K. Itagaki: ‘High temperature phase relations in FeOX (X=1 and 1.33)–CaO–SiO2 systems under various oxygen partial pressure’, Mater. Trans., 2005, 46, (4), 812. doi: 10.2320/matertrans.46.812
   Web of Science ®Google Scholar
• H. Matsuura, M. Kurashige, N. Masahiro, and F. Tsukihashi: ‘Melting and solidifying behaviors of the CaO–SiO2–FeOx slags at various oxygen partial pressures’, ISIJ Int., 2009, 49, (9), 1283. doi: 10.2355/isijinternational.49.1283
   Web of Science ®Google Scholar
• S. Nikolic, P. C. Hayes, and E. Jak: ‘Phase equilibria in ferrous calcium silicate slags: Part I. Intermediate oxygen partial pressures in the temperature range 1200°C to 1350°C’, Metall. Mater. Trans. B, 2008, 39, 179–188. doi: 10.1007/s11663-008-9130-1
   Web of Science ®Google Scholar
• Y. Hida, J. Okazaki, K. Ito, and S. Hirakawa: ‘Effect of mineralogical properties of iron ore on its assimilation with lime’, Tetsu-to-Hagané, 1992, 78, (7), 1013.
   Web of Science ®Google Scholar
• M. S. Magalhaes and P. R. G. Brandao: ‘Microstructures of industrial sinters from Quadrilatero Ferrifero's iron ores, Minas Gerais State, Brazil’, Miner. Eng., 2003, 16, (11), 1251–1256. doi: 10.1016/j.mineng.2003.06.002
   Web of Science ®Google Scholar
• M. Matsumura, M. Hoshi, and T. Kawaguchi: ‘Improvement of sinter softening property and reducibility by controlling chemical compositions’, ISIJ Int., 2005, 45, (4), 594–602. doi: 10.2355/isijinternational.45.594
   Web of Science ®Google Scholar
• B. Nandy, M. K. Choudhary, J. Paul, and D. Bhattacharjee: ‘Sintering characteristics of Indian chrome ore fines’, Metall. Mater. Trans. B, 2009, 40, (5), 662–675. doi: 10.1007/s11663-009-9268-5
   Web of Science ®Google Scholar
• F. Kongoli and A. Yazawa: ‘Liquidus surface of FeO–Fe2O3–SiO2-CaO slag containing Al2O3, MgO, and Cu2O at intermediate oxygen partial pressures’, Metall. Mater. Trans. B, 2001, 32, 583–592. doi: 10.1007/s11663-001-0114-7
   Web of Science ®Google Scholar
• L. Hsieh and J. A. Whiteman: ‘Sintering conditions for simulating the formation of mineral phases in industrial iron ore sinter’, ISIJ Int., 1989, 29, (1), 24–32. doi: 10.2355/isijinternational.29.24
   Web of Science ®Google Scholar
• J. Janowski and A. Sadowski: ‘Kinetics of low temperature reduction of hematite to magnetite’, Ironmak. Steelmak., 1996, 23, (6), 7.
   Web of Science ®Google Scholar
• P. R. Dawson: ‘Part 2 Research Studies on sintering and sinter quality’, Ironmak. Steelmak., 1993, 20, (2), 6.
   Web of Science ®Google Scholar
• P. Dawson: ‘Research studies on sintering and sinter quality’, Ironmak. Steelmak., 1993, 20, (2), 7.
   Web of Science ®Google Scholar
• P. R. Dawson, J. Ostwald and K.M. Hayes: ‘Influence of alumina on development of complex calcium ferrites in iron ore sinters’, Transactions of the Institute of Mining and Metallurgy, 94, June, 1985, C71–C78.
   Google Scholar
• L.-H. Hsieh and J. A. Whiteman: ‘Effect of oxygen potential on mineral formation in lime-fluxed iron ore sinter’, ISIJ Int., 1989, 29, (8), 625–634. doi: 10.2355/isijinternational.29.625
   Web of Science ®Google Scholar
• Li-Heng Hsieh and J. A. Whiteman: ‘Sintering industrial conditions for simulating iron ore sinter on the formation of mineral phases’, ISIJ Int., 1989, 29, (1989), 9.
   Google Scholar
• Nicola V. Y. Scarlett, Mark I. Pownceby, Ian C. Madsen, and A. N. Christensen: ‘Reaction sequences in the formation of silico-ferrites of calcium and aluminum in iron ore sinter’, Metall. Mater. Trans. B, 2004, 35B (October 2004), 7.
   Google Scholar
• G. O. Egundebi and J. A. Whiteman: ‘Evolution of microstructure in iron ore sinter’, Ironmak. Steelmak., 1989, 16, 7.
   Web of Science ®Google Scholar
• D. C. Goldring, L. M. Jukes, and T. A. T. Fray: ‘Characterisation of iron ore sinter from its mineralogy’, Institute of Chemical Engineers, 5th International Symposium on Agglomeration, Brighton, UK, 25–27 September 1989, 425–429.
   Google Scholar