References
- M. S. Magalhaes and P. R. G. Brandao: ‘Microstructures of industrial sinters from quadrilatero ferrifero’s iron ores, Minas Gerais state, Brazil’, Miner. Eng., 2003, 16, (11), 1251. doi: 10.1016/j.mineng.2003.06.002
- M. I. Pownceby and T. R. C. Patrick: ‘Stability of SFC (silico-ferrite of calcium): solid solution limits, thermal stability and selected phase relationships within the Fe2O3-CaO-SiO2 (FCS) system’, Eur. J. Mineral., 2000, 12, 455–468 SRC – GoogleScholar. doi: 10.1127/0935-1221/2000/0012-0455
- N. V. Y. Scarlett, I. C. Madsen, M. I. Pownceby and A. N. Christensen: ‘In situ X-ray diffraction analysis of iron ore sinter phases’, J. Appl. Crystallogr., 2004, 37, 262–268. doi: 10.1107/S002188980400353X
- E. Beppler and U. Janhsen: ‘ Determination of sinter phases and effect of specific phases on coke Consumption’, Eur. Ironmak. Congress, Aachen, 1986, 3, PI/1-2.
- D. Jeulin, J. L. Letailleur and M. Scheider: ‘A new technique for the quantification of iron ore sinter morphology’, Proceedings 2nd International Conference on Agglomeration Atlanta, AIME, 1977, 526–537.
- Y. Shibuya, H. Yanaka, K. Takemoto, Y. Yamaoka, T. Yamada and M. Uesugi: ‘Quantitative determination of sinter structure by image analysis', Trans. ISIJ, 1985, 25, 257–260. doi: 10.2355/isijinternational1966.25.257
- M. Sinha, V. Tiwari, T. K. Ghosh and A. S. Reddy: ‘Techniques and sampling process for iron ore sinter characterisation’, ISIJ Int., 2013, 53, (6), 1112–1114. doi: 10.2355/isijinternational.53.1112
- G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall: ‘A critical evaluation of indentation techniques for measuring fracture toughness: I. Direct crack measurements', J. Am. Ceram. Soc., 1981, 64, (9), 533–538. doi: 10.1111/j.1151-2916.1981.tb10320.x
- C. E. Loo, K. T. Wan and V. R. Howes: ‘Mechanical properties of natural and synthetic mineral phases in sinters having varying reduction degradation indices', Ironmak. Steelmak., 1988, 15, 279–285.
- D. B. Marshall, T. Noma and A. G. Evans: ‘A simple method for determining elastic-modulus–to-hardness ratios using knoop indentation measurements', J. Am. Ceram. Soc., 1982, 65, (10), c175–c176. doi: 10.1111/j.1151-2916.1982.tb10357.x
- M. Sinha and R. V. Ramna: ‘Effect of variation of alumina on the microhardness of iron ore sinter phases', ISIJ Int., 2009, 45, (5), 719–721. doi: 10.2355/isijinternational.49.719
- R. Mitra: ‘Microstructure and mechanical behavior of reaction hot-pressed titanium silicide and titanium silicide-based alloys and composites', Metall. Mater. Trans. A, 1998, 29A, (1998), 10.
- M. Sinha, Samvedana and T. N. Ramaprasad: ‘Determination of amorphous content of granulated blast furnace slag by XRD’, Tata Search, 2013, 2, 71–73.
- K. Takahashi, M. Yokouchi, S.-K. Lee and K. Ando: ‘Crack-Healing behavior of Al2O3 toughened by SiC Whiskers', J. Am. Ceram. Soc., 2003, 86, (12), 2143–2147. doi: 10.1111/j.1151-2916.2003.tb03622.x
- A. S. Reddy, A. K. Roy, R. V. Ramna and A. Kumar: ‘Managing the adverse effect of alumina in sintering process through selective granulation of high alumina iron ore fines', Tata Search, 2007, 2 (2007), 112–117.
- M. Sinha, S. H. Nistala, S. Chandra and T. R. Mankhand: ‘Thermodynamic study of evolution of sinter phases at different alumina level’, IronMaking and Steelmaking, Published Online, 18 Mar 2016, http://dx.doi.org/10.1080/03019233.2016.1156870