References
- A. Memarpour, V. Brabie and P. G. Jönsson: ‘Studies on the decarburization of commercial submerged entry nozzles', Steel Grips J. Steel Related Mater. Plants Equipment, 2011, 9, 121–127.
- A. Memarpour, V. Brabie and P. G. Jönsson: ‘Studies of effect of glass/silicon powder coatings on clogging behaviour of submerged entry nozzles when using REM alloyed stainless steels', Ironmak. Steelmak., 2011, 38, (3), 229–239. doi: 10.1179/1743281210Y.0000000005
- Y. Vermeulen, B. Coletti, P. Wollants, B. Blanpain and F. Haers: ‘Clogging in submerged entry nozzles', Steel Res. Process Metall., 2000, 71, (10), 391–395. doi: 10.1002/srin.200001334
- J. K. S. Svensson, A. Memarpour, V. Brabie and P. G. Jönsson: ‘Studies of the decarburisation phenomena during preheating of submerged entry nozzles (SEN) in continuous casting processes', Ironmak. Steelmak., ISSN: 0301-9233, published online 18th of March 2016.
- A. Memarpour, V. Brabie and P. G. Jönsson: ‘Post-mortem study of the internal coated SENs (submerged entry nozzle) respecting clogging phenomena’, 7th European Continuous Casting Conference Proceedings, Refractory material and tundish lining, Session 14, Düsseldorf, Germany, 27 June – 1 July, 2011, 1–10.
- J. Poirier, M. A. Guiban, P. Tassot, E. Hanse, B. Thillou and P. Benson: ‘Development of new submerged nozzles to reduce alumina build up n in continuous casting’, UNITECR ‘95 Congress Proceedings, Global Development of Refractories, Kyoto, Japan, 19–22 November, The Technical Association of Refractories, 1995, 79–86.
- J. Poirier, B. Thillou, M. A. Guiban and G. Provost: ‘Mechanisms and countermeasures of alumina clogging in submerged nozzles’, Steelmaking Conference Proceedings, 78th, ISS-AIME, Nashville, TN, 1995, 451–456.
- Y. Ohyabu, H. Kuma, H. Kato, K. Arai and M. Yamazaki: ‘ Development of technology for REM additional austenite stainless steel at Naoetsu Works’, Proceedings, International Congress Stainless Steel ‘99 Science and Market, Innovation in Processes and Products, 3rd European Congress, Sardinia, Italy, 6–9 June, 1999, 2, 147–156.
- N. Kojola, S. Ekerot, M. Andersson and P. G. Jönsson: ‘Pilot-plant study of nozzle clogging mechanisms during casting of REM treated stainless steels', Ironmak. Steelmak., 2011, 38, (1), 1–11. doi: 10.1179/030192310X12690127076398
- A. Katsumata and H. Todoroki: ‘Effect of rare earth metal on inclusion composition in molten stainless steel’, ISS Trans., July, 2002, 51–57.
- Z. Suosheng, H. Qiyong, S. Fuyuan, S. Guanglu and X. Zhoungyin: ‘Study on the nozzle blockage mechanism of steel containing rare earth metals during casting’, Scand. J. Metall., 1985, 14, 175–182.
- F. Keming and N. Ruiming: ‘Research on determination of the rare-earth content in metal phases of steel’, Metall. Trans. A, 1986, 17A, 315–323. doi: 10.1007/BF02643907
- A. Memarpour: ‘An experimental study of submerged entry nozzles (SEN) focusing on decarburization and clogging’, Doctoral Thesis in Applied Process Metallurgy, Stockholm Sweden, KTH Industrial Engineering and Management, 2011, Supplement 5.
- K. von Niessen, M. Gindrat and A. Refke: ‘Vapor phase deposition using plasma spray-PVD™’, J. Thermal Spray Technol., 2010, 19, 502–509. doi: 10.1007/s11666-009-9428-9
- S. G. Wu, H. Y. Zhang, G. L. Tian, Z. L. Xia, J. D. Shao and Z. X. Fan: ‘Y2O3 stabilized ZrO2 thin films deposited by electron beam evaporation: structural, morphological characterization and laser induced damage threshold’, Appl. Surf. Sci., 2006, 253, 1561–1565. doi: 10.1016/j.apsusc.2006.02.044
- N. Kojola, S. Ekerot and P. Jönsson: ‘Pilot-plant study of clogging rates in low carbon and stainless steel grades', Ironmak. Steelmak., 2011, 38, (2), 81–89. doi: 10.1179/030192310X12706364542704
- N. Bannenberg: ‘Inclusion modification to prevent nozzle clogging’, Steelmaking Conference Proceedings, Nashville, Tennessee, USA, April 1995, 78, 457–463.
- J. K. S. Svensson, F. Larsson, A. Memarpour, V. Brabie and P. G. Jönsson: ‘Post-mortem Studies of Submerged Entry Nozzles (SEN) Coated with Yttria Stabilized Zirconia (YSZ)’, The 6th International Congress on the Science and Technology of Steelmaking, The Chinese Society for Metals, Beijing, China, May 12–14, China Machine Press, ISBN 978–7-111-50125-1, 2015, 469–472.