References
- R. D. Martín, F. Obeso, J. Mochón, R. Barea and J. Jiménez: ‘Hot metal temperature prediction in blast furnace using advanced model based on fuzzy logic tools’, Ironmak. Steelmak., 2007, 34, (3), 241–247. doi: 10.1179/174328107X155358
- J. Torrkulla, J. Brännbacka, H. Saxén and M. Waller: ‘Indicators of the internal state of the blast furnace hearth’, ISIJ Int., 2002, 42, (5), 504–511. doi: 10.2355/isijinternational.42.504
- M. Swartling, B. Sundelin, A. Tilliander and P. Jönsson: ‘Experimentally determined temperatures in blast furnace hearth’, Ironmak. Steelmak., 2010, 37, (1), 21–26. doi: 10.1179/030192309X12506804200627
- P. D. Burk and J. M. Burgess: ‘A coupled gas and solid flow heat transfer & chemical reaction model’, Iron making conference, Chicago, 2006, 773–781.
- G. M. Cui, J. Li, Y. Zhang, Z. D. Li and X. Ma: ‘Prediction modeling study for blast furnace hot metal temperature based on T-S fuzzy neural network model’, Iron Steel, 2013, 48, (1), 11–15.
- R. Usamentiaga, J. Molleda, D. F. Garcia, et al.: ‘Temperature measurement of molten pig iron with slag characterization and detection using infrared computer vision’, IEEE Trans. Instrum. Meas., 2012, 61, (5), 1149–1159. doi: 10.1109/TIM.2011.2178675
- H. Zhang and Z. H. Xie: ‘Analysis and optimization of the blackbody cavity-based continuous temperature measurement system for liquid steel’, 3rd International Conference on Continuous Casting of Steel in Developing Countries, Beijing, 2004, 787–791.
- M. Sugiura, Y. Ootani and M. Nakashima: ‘Radiation thermometry for high-temperature liquid stream at blast furnace’, SICE Annual Conference (SICE), 2011, 472–475.
- H. Zhang, Y. Yin and S. Zhang: ‘An improved ELM algorithm for the measurement of hot metal temperature in blast furnace’, Neurocomputing, 2016, 174, 232–237. doi: 10.1016/j.neucom.2015.04.106
- L. Zeng, X. Li, X. He, G. Li, Z. Wang and H. Bao: ‘Key factors on the accuracy of measurement temperature by using infrared thermometer’, 2014 International Conference on Reliability, Maintainability and Safety, Guangzhou, 2014, 804–807.
- L. Yongxia: ‘Heat transfer model and applied research of blackbody cavity liquid steel continuous temperature measurement sensor’, 2011, Shenyang, Northeastern University.
- Z. Xie, Y. Ci, H. Meng and H. Zhang: ‘Development of continuous temperature measuring sensor for liquid steel based on blackbody cavity’, Chin. J. Sci. Instr., 2005, 26, (5), 446–449.
- L. Shao and H. SaxÉn: ‘A simulation study of blast furnace hearth drainage using a two-phase flow model of the taphole’, ISIJ Int., 2011, 51, (2), 228–235. doi: 10.2355/isijinternational.51.228
- D. Pan, Z. Jiang and W. Gui: ‘Temperature measurement of molten iron in the main pipeline of blast furnace casting house based on heat transfer model’, The 27th China process control meetings, Lanzhou, 2016.
- D. M. Coulter and M. F. Bardon: ‘Revised equation improves flowing gas temperature prediction’, Oil Gas J., 1979, 2, (26), 107–108.
- Y. Li, S. Feng, and C. Fan: ‘A study on the temperature drop calculation for multiphase flow pipeline’, OGST, 2001, 20, (9), 32–35.
- H. Wang: ‘Calculation and analysis of temperature drop along buried hot waxy oil pipeline’, OGST, 2002, 21, (7), 9–12.
- L. H. Chen and C. C. Hsueh: ‘Fuzzy regression models using the least-squares method based on the concept of distance’, IEEE Trans. Fuzzy Syst., 2009, 17, (6), 1259–1272. doi: 10.1109/TFUZZ.2009.2026891