References
- Abdelkhalek S, Montmitonnet P, Potier-Ferry M, et al. Strip flatness modelling including buckling phenomena during thin strip cold rolling. Ironmak Steelmak. 2010;37(4):290–297. doi: 10.1179/030192310X12646889255708
- Sahay SS, Kapur PC. Model based scheduling of a continuous annealing furnace. Ironmak Steelmak. 2007;34(3):262–268. doi: 10.1179/174328107X165708
- Linghu KZ, Qiao JJ, Wang Y, et al. Simulation and practice on relationship between heat-buckling and initial flatness in CAL. Iron Steel. 2012;47(2):58–61.
- Sahay SS, Kumar AM, Chatterjee A. Development of integrated model for batch annealing of cold rollered steels. Ironmak Steelmak. 2004;31:144–152. doi: 10.1179/030192304225010990
- Wu H, Speets R, Heeremans F, et al. Non-linear model predictive control of throughput and strip temperature for continuous annealing line. Ironmak Steelmak. 2015;42(8):570–578. doi: 10.1179/1743281214Y.0000000263
- Zhang QD, Liu YY, Zhou XM. Local buckling and post buckling analysis of high temperature strip. J Mech Eng. 2005;141(3):102–106.
- Wang CM, Aung TM. Plastic buckling analysis of thick plates using P-Ritz method. Int J Solids Struct. 2007;44(18/19):6239–6255. doi: 10.1016/j.ijsolstr.2007.02.026
- Kim E, Thai HT, Lee J. Buckling analysis of plates using the two variable refined plate theory. Thin-Walled Struct. 2009;47(4):455–462. doi: 10.1016/j.tws.2008.08.002
- Brighemi IL. Numerical buckling analysis of compressed or tensioned cracked thin plates. Eng Struct. 2005;27(2):265–276. doi: 10.1016/j.engstruct.2004.10.006
- Rahai AR, Alinia MM, Kazemi S. Buckling analysis of stepped plates using modified buckling mode shapes. Thin-Walled Struct. 2008;46(5):484–493. doi: 10.1016/j.tws.2007.10.012
- Wang HY, Yang Q, Zhang Y. Effect of double- taper roller shape on the running deviation of strips in a continuous annealing furnace. J Beijing Univ Sci Technol. 2014;36(7):373–377.
- Yang J, Tang D, Su L. Effect of double taper roller shape on the waved surface of strips in continuous annealing process. J Beijing Univ Sci Technol. 2010;32(9):1215–1220.
- Yang J, Yang J, Li WJ. Selection and optimization design of roller in continuous annealing furnace. Industrial Furnace. 2011;33(6):23–27.
- Zhang Y, Yang Q, He AR, et al. Deviation prevention ability of rollers in continuous annealing furnace and application. Int J Iron Steel Res. 2012;19(12):8–13. doi: 10.1016/S1006-706X(13)60025-4
- Matoba T, Ataka M, Aoki I, et al. Effect of crown on heat buckling in continuous annealing and processing line. Iron Steel. 1994;80(8):61–66.
- Bai ZH, Wang R, Cui YY, et al. Model and influence factors of strip transverse tension distribution in CAPL. Iron Steel. 2015;50(4):40–47.
- Bai ZH, Wang R, Chen SY, et al. Online shape prediction and control technology of cold rollered strip during continuous annealing. Ironmak Steelmak. 2015;42(10):791–796. doi: 10.1179/1743281215Y.0000000026
- Tang D, Yang J, Su L, et al. Influence of roller thermal deformation on strip buckling in continuous annealing furnace. J Central South Univ. 2012;43(5):1724–1731.
- Bai ZH, Chen SY, Qian C, et al. Model and influence factors of strip running deviation in CAPL. J Plast Eng. 2016;23(2):28–34.
- Bai ZH, Wang R, Du JC, et al. Modelling of strip buckling in the continuous annealing process. Ironmak Steelmak. doi: 10.1080/03019233.2016.1234734
- Li ZW. Design and selection of furnace roller shape of continuous annealing mills. Anshan Iron Steel Technol. 2007;13:33–34.