References
- Chung JK, Hur NS. Tuyere level coke characteristics in blast furnace with pulverized coal injection. ISIJ Int. 1997;37:119–125. doi: 10.2355/isijinternational.37.119
- Li KJ, Khanna R, Zhang JL, et al. The evolution of structural order, microstructure and mineral matter of metallurgical coke in a blast furnace: a review. Fuel. 2014;133:194–215. doi: 10.1016/j.fuel.2014.05.014
- Li KJ, Zhang JL, Liu ZJ, et al. Gasification of graphite and coke in carbon–carbon dioxide–sodium or potassium carbonate systems. Ind Eng Chem Res. 2014;53:5737–5748. doi: 10.1021/ie4039955
- Gupta S, Ye ZZ, Kanniala R, et al. Coke graphitization and degradation across the tuyere regions in a blast furnace. Fuel. 2013;113:77–85. doi: 10.1016/j.fuel.2013.05.074
- Li KJ, Zhang JL, Barati M, et al. Influence of alkaline (Na, K) vapors on carbon and mineral behavior in blast furnace cokes. Fuel. 2015;145:202–213. doi: 10.1016/j.fuel.2014.12.086
- Zhu RL. Analysis on tuyere damage of Bao Steel No.2 BF. Baosteel Technol. 1995;2:7–9.
- Liu J. An approach to damage mechanism and life of BF tuyere. Res Iron Steel. 1998;6:11–15.
- Esezobor D, Balogun S. Zinc accumulation during recycling of iron oxide wastes in the blast furnace. Ironmak Steelmak. 2006;33:419–25. doi: 10.1179/174328106X114020
- Wang X, Fu Y, Li Z, et al. Research on balance and distribution of the Zn to blast furnace of Baosteel. J of Anhui University of Technology. 2004;21:179–181.
- Wang X, Fu Y, Li Z, et al. Calculating zinc balance and reutilizing dust slime with zinc in blast furnce. Iron Steel. 2004;39:67–70.
- Vereš J, Lovás M, Jakabský Š. Proceedings of 13th Conference on Environment and Mineral Proceeding. 2009, 283–289.
- de Almeida MRH, Barbano EP, de Carvalho MF, et al. Copper–zinc electrodeposition in alkaline-sorbitol medium: electrochemical studies and structural, morphological and chemical composition characterization. Appl Surf Sci. 2015;333:13–22. doi: 10.1016/j.apsusc.2015.02.005
- Rousse C, Beaufils S, Fricoteaux P. Electrodeposition of Cu–Zn thin films from room temperature ionic liquid. Electrochim Acta. 2013;107:624–631. doi: 10.1016/j.electacta.2013.06.053
- de Vreese P, Skoczylas A, Matthijs E, et al. Electrodeposition of copper–zinc alloys from an ionic liquid-like choline acetate electrolyte. Electrochim Acta. 2013;108:788–794. doi: 10.1016/j.electacta.2013.06.140
- Zhao YL, Shi J, Cao WQ, et al. Effect of heating temperature on austenite grain growth of a medium carbon Nb steel. Trans Mater Heat Treat. 2010;31:67–70.
- Liu PX, Liu XT, Liu HN. Process handbook of copper and copper alloy. Beijing: Beijing Industry Press; 2008.
- Chai YF, Zhang JL, Ning XJ, et al. High Tem Mater Proc. 2015;35:73–80.
- Li FG. Research on application of copper cooling stave under highly intensified smelting condition. Beijing: University of Science and Technology Beijing; 2015.
- Wang ZM. Research on some parameters about tubular tuyere for Baosteel. Ironmaking. 1984;2:22–25.
- Li KJ, Zhang JL, Liu ZJ, et al. Zinc accumulation and behavior in tuyere coke. Metall Mater Trans B Process Metall Mater Process Sci. 2014;45B:1581–1588. doi: 10.1007/s11663-014-0143-7