References
- Klinkenberg C, Bilgen C, Boecher T, et al. 20 years of experience in thin slab casting and rolling state of the art and future developments. Mater Sci Forum. 2010;638–642:3610–3615. doi: 10.4028/www.scientific.net/MSF.638-642.3610
- Arvedi G, Mazzolari F, Siegl J, et al. Arvedi ESP first thin slab endless casting and rolling results. Ironmak Steelmak. 2010;37:271–275. doi: 10.1179/030192310X12646889255744
- Reip C-P, Hennig W, Kempken J, et al. Development of CSP processed high strength pipe steels. Mater Sci Forum. 2005;500–501:287–294.
- Priestner R. Microstructural change during the hot working of as-cast austenite. Mater Sci Forum. 1998;284–286:95–104. doi: 10.4028/www.scientific.net/MSF.284-286.95
- Muller J, Henning W, Bilgen C. ‘Advanced CSP casting technology for high-quality steel grades. Proceedings of the 33rd McMaster Symposium on Iron & Steelmaking; Hamilton (ON). McMaster University; June 2005. p. 240–250.
- Rodriguez-Ibabe JM. Thin slab direct rolling of microalloyed steels. Mater Sci Forum. 2005;500–501:49–63. doi: 10.4028/www.scientific.net/MSF.500-501.49
- Iwamoto M. Selection guidance of OCTG material & connection in various applications of oil & gas wells. J Jpn Assoc Pet Technol. 2013;78:376–381. doi: 10.3720/japt.78.376
- Zhou T, Zhang P, Kuuskman K, et al. Development of medium-high carbon casing/Tubing for direct strip production complex (DSPC). Contributed Papers from Materials Science & Technology 2016, Paper presented at MS&T16; Salt Lake City (UT). Warrendale (PA): Materials Science & Technology; 2016. p. 769–776.
- Imai N, Komatsubara N, Kunishige K. Effect of Cu, Sn and Ni on hot workability of hot-rolled mild steel. ISIJ Int. 1997;37:217–223. doi: 10.2355/isijinternational.37.217
- Cahn RW, Haasen P. Physical metallurgy. 4th ed. Amsterdam: North-Holland Physics Publishing; 1996. p. 670–830.
- Sobral MDC, Mei PR, Santos RG, et al. Laboratory simulation of thin slab casting. Ironmak Steelmak. 2003;30:412–416. doi: 10.1179/030192303225004079
- Zhou T, Zurob HS, Essadiqi E, et al. Kinetics of delta-ferrite to austenite phase transformation in a two-phase Fe-Al-C Alloy. Metall Mater Trans A. 2011;42A:3349–3357. doi: 10.1007/s11661-011-0747-3
- McCarrney DG, Hunt JD. Measurements of cell and primary dendrite arm spacing in directionally solidified aluminum alloys. ActaMetallurgica. 1981;29:1851–1863.
- Bouchard D, Kirkaldy JS. Prediction of dendrite arm spacings in unsteady and steady-state heat flow of unidirectionally solidified binary alloys. Metall Mater Trans B. 1997;28B:651–663. doi: 10.1007/s11663-997-0039-x
- Taha MA. Influence of solidification parameters on dendrite arm spacings in low carbon steels. J Mater Sci Lett. 1986;5:307–310. doi: 10.1007/BF01748087
- Zhou T, O’Malley RJ, Zurob HS. Study of grain-growth kinetics in delta-ferrite and austenite with application to thin-slab cast direct-rolling microalloyed steels. Metall Mater Trans A. 2010;41A:2112–2120. doi: 10.1007/s11661-010-0246-y
- Mao X, Chen Q, Li C. Manufacturing technique of high-medium carbon steel for thin slab casting and direct rolling process. Iron Steel. 2012;47:93–97.