Warm deformation and fracture behaviour of DP1000 advanced high strength steel

References

• Kuziak R, Kawalla R, Waengler S. Advanced high strength steels for automotive industry. Arch Civ Mech Eng. 2008;8(1):103–117. doi: 10.1016/S1644-9665(12)60197-6
   Web of Science ®Google Scholar
• Wang W, Wei X. The effect of martensite volume and distribution on shear fracture propagation of 600–1000 MPa dual phase sheet steels in the process of deep drawing. Int J Mech Sci. 2013;67:100–107. doi: 10.1016/j.ijmecsci.2012.12.011
   Web of Science ®Google Scholar
• Huh H, Kim SB, Song JH, et al. Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body. Int J Mech Sci. 2008;50:918–931. doi: 10.1016/j.ijmecsci.2007.09.004
   Web of Science ®Google Scholar
• Kalashami AG, Kermanpur A, Najafizadeh A, et al. Development of a high strength and ductile Nb-bearing dual phase steel by cold-rolling and intercritical annealing of the ferrite martensite microstructures. Mater Sci Eng A. 2016;658:355–366. doi: 10.1016/j.msea.2016.02.028
   Web of Science ®Google Scholar
• Rosenberg G, Sinaiová I, Juhar Ľ. Effect of microstructure on mechanical properties of dual phase steels in the presence of stress concentrators. Mater Sci Eng A. 2013;582:347–358. doi: 10.1016/j.msea.2013.06.035
   Web of Science ®Google Scholar
• Gündüz S, Demir B, Kaçar R. Effect of aging temperature and martensite by volume on strain aging behaviour of dual phase steel. Ironmak Steelmak. 2015;35(1):63–68. doi: 10.1179/174328107X203949
   Web of Science ®Google Scholar
• Wu-rong W, Chang-wei H, Zhong-hua Z, et al. The limit drawing ratio and formability prediction of advanced high strength dual-phase steels. Mater Des. 2011;32:3320–3327. doi: 10.1016/j.matdes.2011.02.021
   Web of Science ®Google Scholar
• Bay A, Ray KK, Dwarakadasa ES. Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels. Metall Mat Trans A. 1999;30:1993–1202.
   Google Scholar
• Davis J. Tensile testing. 2nd ed. Materials Park, OH: ASM International; 2004.
   Google Scholar
• Çavuşoğlu O, Güral A, Gürün H. Influence of strain rate on tensile properties and fracture behaviour of DP600 and DP780 dual-phase steels. Ironmak Steelmak. 2016. DOI:10.1080/03019233.2016.1232911
   Web of Science ®Google Scholar
• Ma M, Ding H, Tang Z, et al. Effect of strain rate and temperature on hot workability and flow behaviour of duplex stainless steel. Ironmak Steelmak. 2016;43(2):88–96. doi: 10.1179/1743281215Y.0000000053
   Web of Science ®Google Scholar
• Dong H, Wang CY, Chen Y, et al. Warm stamping of the 3rd generation sheet steel for automobiles. Adv Mater Res. 2015;1063:219–222. doi: 10.4028/www.scientific.net/AMR.1063.219
   Google Scholar
• Mori K, Maki S, Tanaka Y. Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating. CIRP Ann Manufact Technol. 2005;54(1):209–212. doi: 10.1016/S0007-8506(07)60085-7
   Web of Science ®Google Scholar
• Pei HX, Zhang HL, Wang LX, et al. Tensile behaviour of 316LN stainless steel at elevated temperatures. Mater High Temp. 2014;31(8):198–203. doi: 10.1179/1878641314Y.0000000014
   Web of Science ®Google Scholar
• Şen N, Karaağaç İ, Kurgan N. Experimental research on warm deep drawing of HC420LA grade sheet material. Int J Adv Manuf Technol. 2016;87:3359–3371. doi: 10.1007/s00170-016-8617-1
   Web of Science ®Google Scholar
• Yanagimoto J, Oyamada K, Nakagawa T. Springback of high-strength steel after hot and warm sheet formings. CIRP Ann Manufact Technol. 2005;54(1):213–216. doi: 10.1016/S0007-8506(07)60086-9
   Web of Science ®Google Scholar
• Güler H. Investigation of usibor 1500 formability in a hot forming operation. Mater Sci (Medžiagotyra). 2013;19(2):144–146.
   Web of Science ®Google Scholar
• Curtzea S, Kuokkalaa V-T, Hokkaa M, et al. Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates. Mater Sci Eng A. 2009;507:124–131. doi: 10.1016/j.msea.2008.11.050
   Web of Science ®Google Scholar
• Chen W, Cheng S, Xue L, et al. Modelling of flow stress of dual phase steel under warm tensile deformation. Mater Sc Technol. 2011;27(6):1002–1006. doi: 10.1179/026708310X12635619988140
   Web of Science ®Google Scholar
• Akbarpour MR. Ekrami A. Effect of temperature on flow and work hardening behavior of high bainite dual phase (HBDP) steels. Mater Sci Eng A. 2008;475:293–298. doi: 10.1016/j.msea.2007.04.099
   Web of Science ®Google Scholar
• Ekrami A. High temperature mechanical properties of dual phase steels. Mater Lett. 2005;59:2070–2074. doi: 10.1016/j.matlet.2005.02.018
   Web of Science ®Google Scholar
• Ozturk F, Toros S, Kilic S. Tensile and spring-back behavior of DP600 advanced high strength steel at warm temperatures. J Iron Steel Res Int. 2009;16(8):41–46. doi: 10.1016/S1006-706X(10)60025-8
   Web of Science ®Google Scholar
• Cao Y, Ahlström J, Karlsson B. The influence of temperatures and strain rates on the mechanical behavior of dual phase steel in different conditions. J Mater Res Technol. 2015;4(1):68–74. doi: 10.1016/j.jmrt.2014.11.001
   Google Scholar
• Queiroz RRU, Cunha FGG, Gonzalez BM. Study of dynamic strain aging in dual phase steel. Mater Sci Eng A. 2012;543:84–87. doi: 10.1016/j.msea.2012.02.050
   Web of Science ®Google Scholar
• Molaei MJ, Ekrami A. The effect of dynamic strain aging on subsequent mechanical properties of dual-phase steels. J Mater Eng Perform. 2010;19:607–610. doi: 10.1007/s11665-009-9429-3
   Web of Science ®Google Scholar
• Sun Y, Li X, Yu X, et al. Fracture morphologies of advanced high strength steel during deformation. Acta Metall Sin (Engl Lett). 2014;27:101–106. doi: 10.1007/s40195-014-0032-8
   Web of Science ®Google Scholar
• Sun X, Choi KS, Soulami A, et al. On key factors influencing ductile fractures of dual phase (DP) steels. Mater Sci Eng A. 2009;526:140–149. doi: 10.1016/j.msea.2009.08.010
   Web of Science ®Google Scholar