References
- Bai ZH, Shi XD, Zhang YY, et al. Research on the mechanism of strip buckling in continuous annealing process. J Plast Eng. 2012;19(1):97–102.
- Abdelkhalek S, Montmitonnet P, Potier-Ferry M, et al. Strip flatness modelling including buckling phenomena during thin strip cold rolling. Ironmak Steelmak. 2010;37(4):290–297. doi: 10.1179/030192310X12646889255708
- Hu GK. Tension analysis for stable strip in a continuous annealing furnace. Baosteel Technol. 2010;4(5):47–50.
- Wu H, Speets R, Heeremans F, et al. Non-linear model predictive control of throughput and strip temperature for continuous annealing line. Ironmak Steelmak. 2015;42(8):570–578. doi: 10.1179/1743281214Y.0000000263
- Sahay SS, Kapur PC. Model based scheduling of a continuous annealing furnace. Ironmak Steelmak. 2007;34(3):262–268. doi: 10.1179/174328107X165708
- Bai ZH, Wang R, Chen SY, et al. Online shape prediction and control technology of cold rolled strip during continuous annealing. Ironmak Steelmak. 2015;42(10):791–796. doi: 10.1179/1743281215Y.0000000026
- Li HM, Liu JX, Li JH. Research of transverse tension distribution on steel strip in continuous-annealing furnace. Mater Heat Treat. 2010;39(04):148–150.
- Zhang QD, Chang TZ, Dai JB, et al. Finite element simulation of the transverse distribution of tensile stress in the strip during continuous annealing process. J Beijing Univ Sci Technol. 2006;28(12):1162–1166.
- Zhang LX, Li J, Zhang LY, et al. Study on strip critical buckling tensile in continuous annealing lines. Iron Steel. 2012;47(6):42-45. doi: 10.1016/S1006-706X(13)60030-8
- Wang L. Selection of coatings for surface protection of annealing furnace roller for automobile plate and causes leading to accumulated burl of the coating. Mater Prot. 2006;39(11):68–71.
- Wang L. Preparation and development of new thermal spray material of continuous annealing furnace roller. Heat Treat Met. 2008;33(8):33–36.
- Liu SX, Zhao ZJ, Hao Y, et al. Forming mechanism and counter measure of pitting on cold rolled continuous annealed strip steel surface. Heat Treat Met. 2014;39(9):147–150.
- Wang J. Variation and analysis of CAPL hearth roller’s surface roughness. Metall Equip. 2005;26(5):21–24.
- Bai ZH, Chen SY, Qian C, et al. Model and influence factors of strip running deviation in CAPL. J Plast Eng. 2016;23(2):28–34.
- Bai ZH, Wang R, Du JC, et al. Modelling of strip buckling in the continuous annealing process. Ironmak Steelmak. doi: 10.1080/03019233.2016.1234734