References
- Holappa L, Hämäläinen M, Liukkonen M, et al. Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel. Ironmak Steelmak. 2003;30(2):111–115. doi: 10.1179/030192303225001748
- Turkdogan ET. Fundamentals of steelmaking. London: The Institute of Materials; 1996, 286.
- Holappa LE. Ladle injection metallurgy. Int Met Rev. 1982;27(1):53–76. doi: 10.1179/095066082790324388
- Wilson AD. Characterization of inclusions in plate steels and their influence on mechanical properties. In: Rungta R, editor. Proceedings of a symposium of inclusions and their influence on material behavior. Chicago(Illinois): ASM International; 1988. p. 21.
- Wilson AD. Clean steel technology-fundamental to the development of high performance steels. In: JK Mahaney, editor. Advances in the production & use of steel with improved internal cleanliness. West Conshohocken (PA): ASTM STP 1361; 1999. p. 73.
- Shepherd ES, Rankin GA, Wright FE. The binary systems of alumina with silica, lime, and magnesia. Am J Sci. 1909;s4–28(166):293–333. doi: 10.2475/ajs.s4-28.166.293
- Rankin GA, Wright FE. The ternary system CaO-A12O3-SiO2. Am J Sci 1915;s4–39(229):1–79. doi: 10.2475/ajs.s4-39.229.1
- Gentile AL, Foster WR. Calcium hexaluminute and its stability relations in the system CaO-Al2O3-SiO2. J Am Cer Soc. 1963;46(2):74–76. doi: 10.1111/j.1151-2916.1963.tb11679.x
- Eriksson G, Pelton AD. Critical evaluation and optimization of the thermodynamic properties and phase diagrams of the CaO-Al2O3, Al2O3-SiO2, and CaO-Al2O3-SiO2 systems. Metall Mater Trans B. 1993;24(5):807–816. doi: 10.1007/BF02663141
- Nurse RW, Welch JH, Majumdar AJ. The 12CaO.7Al2O3 phase in the CaO–Al2O3 system. Trans Br Ceram Soc. 1965;64:323–332.
- Nityanand N, Fine HA. The effect of TiO2 additions and oxygen potential on liquidus temperatures of some CaO–Al2O3. Metall Mater Trans B. 1983;14(4):685–692. doi: 10.1007/BF02653955
- Jerebtsov DA, Mikhailov GG. Phase diagram of CaO-Al2O3 system. Ceram Inter. 2001;27(1):25–28. doi: 10.1016/S0272-8842(00)00037-7
- Story SR, Piccone TJ, Fruehan RJ. Inclusion analysis to predict casting behavior. Iron Steel Technol. 2004;1:163–169.
- Ahlborg K, Fruehan RJ, Potter MS, et al. Inclusions in aluminum-killed steel with varying calcium additions. In: Isstech. Conference Proceedings. Warrendale (PA): Iron and Steel Society; 2003, p. 177–194.
- Tshilombo K. Determination of inclusions in liquid steel after calcium treatment. Int J Miner Metall Mater. 2010;17(1):28–31. doi: 10.1007/s12613-010-0105-2
- Rackers KG, Thomas BG. Clogging in continuous casting nozzles. In: Proceedings of 78th Steelmaking Conference. Warrendale (PA): Iron and Steel Society; 1995, 78, p. 723–734.
- Geldenhuis JMA, Pistorius PC. Minimisation of calcium additions to low carbon steel grades. Ironmak Steelmak. 2000;27(6):442–449. doi: 10.1179/030192300677769
- Verma N, Pistorius PC, Fruehan RJ, et al. Transient inclusion evolution during modification of alumina inclusions by calcium in liquid steel: part II. Results and discussion. Metall Mater Trans B. 2011;42(4):720–729. doi: 10.1007/s11663-011-9517-2
- Llewellyn DT, Hudd RC. Steels: metallurgy and applications. Oxford: Butterworth-Heinemann; 1998, 163.
- Basak S, Dhal RK, Roy GG. Efficacy and recovery of calcium during CaSi cored wire injection in steel melts. Ironmak Steelmak. 2010;37(3):161–168. doi: 10.1179/030192309X12506804200384
- User manual version 2, secondary steelmaking simulation. Liverpool: The University of Liverpool; 2004. p. 10.
- Dub AV, Tsukihashi F, Sano N. Solubilities of Al2O3, SiO2 and Cr2O3 in the FeS containing systems. ISIJ Int. 1991;31(12):1438–1440. doi: 10.2355/isijinternational.31.1438
- Rödl S, Schuster H, Ekerot S, et al. New strategies for clogging prevention for improved productivity and steel quality, research fund for coal and steel, directorate-general for research and innovation. Brussel: European Commission; 2012. p. 142.
- Kamble A, Lawrance D, Sinha PK, et al. Enhancing calcium recovery by introduction of pure calcium cored wires in steel ladles. Steel Tech. Jan. 2014;8:63–71.