The structure of foaming BOF-converter slag

References

• Jalkanen H, Holappa L. In Seshadri, S, editor. Treatise on process metallurgy. Boston: Elsevier; 2014. p. 223–270.
   Google Scholar
• Sheikhshab Bafghi M, Kurimoto H, Sano M. Effect of slag foaming on the reduction of iron oxide in molten slag by graphite. Isij Int. 1992;32:1084–1090. doi: 10.2355/isijinternational.32.1084
   Web of Science ®Google Scholar
• Cicutti C, Valdez M, Perez T, et al. Analysis of slag. Foaming during the operation of an industrial converter. Lat Am Appl Res. 2002;32:237–240.
   Web of Science ®Google Scholar
• Masucci P, Capodilupo D, Brascugli G. Proceedings of the 6th International Iron and Steel Congress. ISIJ; October 21-26 1990. Nagoya, Japan, p. 98–104.
   Google Scholar
• Deo B, Karamcheti A, Paul A, et al. Characterization of slag-metal droplet-gas emulsion in oxygen steelmaking converters. Isij Int. 1996;36:658–666. doi: 10.2355/isijinternational.36.658
   Web of Science ®Google Scholar
• Hara S, Ogino K. Slag-foaming phenomenon in pyrometallurgical processes. Isij Int. 1992;32:81–86. doi: 10.2355/isijinternational.32.81
   Web of Science ®Google Scholar
• Hong L, Hirasawa M, Sano M. Behavior of slag foaming with reduction of iron oxide in molten slags by graphite. Isij Int. 1998;38:1339–1345. doi: 10.2355/isijinternational.38.1339
   Web of Science ®Google Scholar
• Ito K, Fruehan RJ. Study on the foaming of CaO-SiO2-FeO slags: Part I. Foaming parameters and experimental results. Metall Mater Trans B. 1989;20:509–514. doi: 10.1007/BF02654600
   Web of Science ®Google Scholar
• Ito K, Fruehan RJ. Study on the foaming of CaO-SiO2-FeO slags: Part II. Dimensional analysis and foaming in iron and steelmaking processes. Metall Mater Trans B. 1989;20:515–521. doi: 10.1007/BF02654601
   Web of Science ®Google Scholar
• Jiang R, Fruehan RJ. Slag foaming in bath smelting. Metall Mater Trans B. 1991;22:481–489. doi: 10.1007/BF02654286
   Web of Science ®Google Scholar
• Jung S, Fruehan RJ. Foaming characteristics of BOF slags. Isij Int. 2000;40:348–355. doi: 10.2355/isijinternational.40.348
   Web of Science ®Google Scholar
• Kitamura S, Okohira K. Influence of slag composition and temperature on slag foaming. Isij Int. 1992;32:741–746. doi: 10.2355/isijinternational.32.741
   Web of Science ®Google Scholar
• Martín M, Rendueles M, Díaz M. Emulsion analysis in a gas/liquid/liquid reactor with top blowing. Can J Chem Eng. 2004;82:249–255. doi: 10.1002/cjce.5450820206
   Web of Science ®Google Scholar
• Martinsson J, Glaser B, Sichen D. Study on apparent viscosity and structure of foaming slag. Metall Mater Trans B. 2016;47:2710–2713. doi: 10.1007/s11663-016-0760-4
   Web of Science ®Google Scholar
• Meyer HW, Porter WF, Smith GC, et al. Slag-metal emulsions and their importance in BOF steelmaking. JOM. 1968;20:35–42. doi: 10.1007/BF03378731
   Web of Science ®Google Scholar
• Nexhip C, Sun S, Jahanshahi S. Physicochemical properties of foaming slags. Int Mater Rev. 2004;49:286–298. doi: 10.1179/095066004225021945
   Web of Science ®Google Scholar
• Ozturk B, Fruehan RJ. Effect of temperature on slag foaming. Metall Mater Trans B. 1995;26:1086–1088. doi: 10.1007/BF02654111
   Web of Science ®Google Scholar
• Sattar MA, Naser J, Brooks G. Numerical simulation of slag foaming on bath smelting slag (CaO–SiO2–Al2O3–FeO) with population balance modeling. Chem Eng Sci. 2014;107:165–180. doi: 10.1016/j.ces.2013.11.037
   Web of Science ®Google Scholar
• Skupien D, Gaskell DR. The surface tensions and foaming behavior of melts in the system CaO-FeO-SiO2. Metall Mater Trans B. 2000;31:921–925. doi: 10.1007/s11663-000-0068-1
   Web of Science ®Google Scholar
• Swinnerton M. School of mechanical, materials and mechatronic engineering. New South Wales: University of Wollongong; 2005.
   Google Scholar
• Misra P, Deo B, Chhabra RP. Dynamic model of slag foaming in oxygen steelmaking converters. Isij Int. 1998;38:1225–1232. doi: 10.2355/isijinternational.38.1225
   Web of Science ®Google Scholar
• Stadler SAC, Eksteen JJ, Aldrich C. An experimental investigation of foaming in acidic, high FexO slags. Miner Eng. 2007;20:1121–1128. doi: 10.1016/j.mineng.2007.01.013
   Web of Science ®Google Scholar
• Millman MS, Overbosch A, Kapilashrami A, et al. Study of refining performance in BOS converter. Ironmak Steelmak. 2011;38:499–509. doi: 10.1179/030192311X13135947813852
   Google Scholar
• Millman MS, Overbosch A, Kapilashrami A, et al. Some observations and insights on BOS refining. Ironmak Steelmak. 2013;40:460–469. doi: 10.1179/1743281212Y.0000000092
   Web of Science ®Google Scholar
• Gran J, Thunman M, Sichen D. Effects of slag composition and cooling rate on formation of glaze on MgO refractory. Ironmak Steelmak. 2010;37:27–34. doi: 10.1179/174328109X463039
   Web of Science ®Google Scholar
• Smalcerz A, Przylucki R. Impact of electromagnetic field upon temperature measurement of induction heated charges. Int J Thermophys. 2013;34:667–679. doi: 10.1007/s10765-013-1423-1
   Web of Science ®Google Scholar
• Verein Deutscher Eisenhüttenleute and Verein Deutscher Eisenhüttenleute. Ausschuss für Metallurgische Grundlagen: Schlackenatlas. 2nd ed. Verlag Stahleisen; 1995.
   Google Scholar
• Mollet H, Grubenmann A. Formulation technology. Weinheim, Germany: Wiley-VCH Verlag GmbH; 2007. p. 123–130.
   Google Scholar
• Wu LS, Albertsson GJ, Sichen D. Modelling of slag foaming. Ironmak Steelmak. 2010;37:612–619. doi: 10.1179/030192310X12690127076550
   Web of Science ®Google Scholar