Effect of mould design on the Niyama criteria during solidification of CH3C 80t ingot

References

• Tashihiro K, Watanabe S, Kitagawa I, et al. Influence of mould design on the solidification and soundness of heavy forging ingots. Trans Iron Steel Inst Japan. 1983;23(4):312–321. doi: 10.2355/isijinternational1966.23.312
   Google Scholar
• Wang J, Fu P, Liu H, et al. Shrinkage porosity criteria and optimized design of a 100-ton 30Cr2Ni4MoV forging ingot. Mater Des. 2012;35:446–456. doi: 10.1016/j.matdes.2011.09.056
   Web of Science ®Google Scholar
• Heidarzadeh M, Keshmiri H. Influence of mould and insulation design on soundness of tool steel ingot by numerical simulation. J Iron Steel Res Int. 2013;20(7):78–83. doi: 10.1016/S1006-706X(13)60130-2
   Web of Science ®Google Scholar
• Kermanpur A, Eskandari M, Purmohamad H, et al. Influence of mould design on the solidification of heavy forging ingots of low alloy steels by numerical simulation. Mater Des. 2010;31(3):1096–1104. doi: 10.1016/j.matdes.2009.09.045
   Web of Science ®Google Scholar
• Carlson KD, Beckermann C. Prediction of shrinkage pore volume fraction using a dimensionless Niyama criterion. Metall Mater Trans A. 2009;40(A):163–175. doi: 10.1007/s11661-008-9715-y
   Web of Science ®Google Scholar
• Monroe C, Beckermann C. Prediction of hot tearing using a dimensionless Niyama criterion. Jom. 2014;66(8):1439–1445. doi: 10.1007/s11837-014-0999-7
   Web of Science ®Google Scholar
• Tavakoli R. On the prediction of shrinkage defects by thermal criterion functions. Int J Adv Manuf Technol. 2014;74(1):569–579. doi: 10.1007/s00170-014-5995-0
   Web of Science ®Google Scholar
• Jain N, Carlson KD, Beckermann C. Round robin study to assess variations in casting simulation Niyama criterion predictions. Proceedings of the 61th SFSA Technical nd Operating Conference, 2007;Steel Founders’ Society of America, Chicago, IL.
   Google Scholar
• Viswanathan S, Sikka VK, Brody HD. Using solidification parameters to predict porosity distributions in alloy castings. JOM. 1992;44(9):37–40. doi: 10.1007/BF03222324
   Web of Science ®Google Scholar
• Havlicek F, Elbel T. Geometrical modulus of a casting and its influence on solidification process. Arch Foundry Eng. 2011;11(4):170–176.
   Google Scholar
• Flemings MC. Solidification processing. New York: McGraw-Hill series in materials science and enginering; 1974.
   Google Scholar
• Scepi M, Andreoli B, Basevi S, et al. Thermal and metallurgical control of the efficiency of ingot moulds for forging ingots. Boll Tec Finsider. 1981;391:77–82.
   Google Scholar
• Gu JP, Beckermann C. Simulation of convection and macrosegregation in a large steel ingot. Metall Mater Trans A. 1999;30(5):1357–1366. doi: 10.1007/s11661-999-0284-5
   Web of Science ®Google Scholar
• Harris N. Determination of optimal forging conditions for void elimination in large steel ingots[master's thesis]. Montreal: public engineering school in Montreal, Quebec: 2016.
   Google Scholar
• Harris N, Shahriari D, Jahazi M. Analysis of void closure during open die forging process of large size steel ingots forging. Key Eng Mater. 2016;716:579–585. doi: 10.4028/www.scientific.net/KEM.716.579
   Google Scholar
• Lee YS, Lee SU, Van Tyne CJ, et al. Internal void closure during the forging of large cast ingots using a simulation approach. J Mater Process Technol. 2011;211(6):1136–1145. doi: 10.1016/j.jmatprotec.2011.01.017
   Web of Science ®Google Scholar
• Liu Y, Jiang B, Liu G, et al. Void closure and the sensitivity analysis of the process parameters during forging of large steel ingot. Proceedings of the 8nd International Conference on Physical and Numerical Simulation of Materials Processing; 2016 Oct 14-17; Seattle Marriott Waterfront, Seattle, Washington, USA.
   Google Scholar
• Miroslav G, Madaj M, Jiri P, et al. Effect of forging ratio on microstructure of the 1.5710 grade steel. J. Mech EngAutomat. 2015;5:454–458.
   Google Scholar
• Fredriksson H, Åkerlind U. Materials processing during casting. Sussex: John Wiley & Sons; 2006. doi: 10.1002/9780470017920
   Google Scholar