References
- Xi XJ, Yang SF, Li JS, et al. Thermal simulation experiments on scrap melting in liquid steel. Ironmak Steelmak. doi:10.1080/03019233.2018.1540522.
- Li JH, Brooks G, Provatas N. Kinetics of scrap melting in liquid steel. Metall Mater Trans B. 2005;36(2):293–302. doi: 10.1007/s11663-005-0031-2
- Li JH. Kinetics of steel scrap melting in liquid steel bath in an electric arc furnace [PhD dissertation]. McMaster University, Hamilton, Canada, 2007.
- Szekely J, Chuang YK, Hlinka JW. The melting and dissolution of low-carbon steels in iron-carbon melts. Metall Mater Trans B. 1972;3(11):2825–2833. doi: 10.1007/BF02652849
- Kawakami M, Hiroe T. Fundamental study on scrap melting under gas bubbling condition[M]. Department of Production Systems Engineering, Toyohashi University of Technology, Japan, 1991.
- Wight JK. Steel dissolution in quiescent and gas stirred Fe/C melts. Metall Mater Trans B. 1989;20(3):363–374. doi: 10.1007/BF02696988
- Eckehard S, Rudolf J. Kinetics of steel melting in carbon-steel alloys. Steel Res Int. 1993;64(1):28–34. doi: 10.1002/srin.199300978
- Li JH, Provatas N. Kinetics of scrap melting in liquid steel: multipiece scrap melting. Metall Mater Trans B. 2008;39(2):268–279. doi: 10.1007/s11663-007-9102-x
- Akseki H. Scaling analysis of melting kinetics in randomly packed steel scrap in electric arc furnace steel making [PhD dissertation]. McMaster University, Hamilton. Canada. 2010.
- Östman M. Pre-study of models and mapping physical modeling of scrap melting. [Master’s thesis]. Luleå University of Technology, Luleå, Sweden, 2006.
- Mandal K. Modeling of scrap heating by burners [PhD dissertation]. McMaster University, Hamilton, Canada, 2010.
- Yasser EMG. Modeling, optimization and estimation in electric arc furnace (EAF) operation [PhD dissertation]. McMaster University, Hamilton, Canada, 2013.
- Nyssen P, Colin R, Knoops S. Application of a dynamic metallurgical model to the electric arc furnace. Rev Met Paris. 2004;101(4):317–326. doi: 10.1051/metal:2004203
- MacRosty RDM, Swartz CLE. Dynamic modeling of an industrial electric arc furnace. Ind Eng Chem Res. 2005;44(21):8067–8083. doi: 10.1021/ie050101b
- Stankevich YA, Timoshpol’skii VL, Pavlyukevich NV, et al. Mathematical modeling of the heating and melting of the metal charge in an electric-arc steel-making furnace. J Eng Phys Thermophys. 2009;82(2):221–235. doi: 10.1007/s10891-009-0202-0
- Opitz F, Treffinger P. Physics-based modeling of electric operation, heat transfer, and scrap melting in an AC electric arc furnace. Metall Mater Trans B. 2016;47(2):1489–1503. doi: 10.1007/s11663-015-0573-x
- Liu YS, Gap JP, Zhang JB, et al. Water model study on the feature of scrap melting in the oxygen top-bottom combined blowing process. J Iron Steel Res. 1990;2(4):1–7. (In Chinese).
- Zhu R, Wei GS, Tang TP. Technologies of purification production in electric arc furnace steelmaking process. Steelmaking. 2018;34(1):10–19.
- He Q, Guo Z. Technical development of increasing oxygen used in EAF process. J Iron Steel Res. 2004;16(5):1–5. (In Chinese).
- Alam M, Naser J, Brooks G, et al. Computational fluid dynamics modeling of supersonic coherent jets for electric arc furnace steelmaking. Metall Mater Trans B. 2010;41(6):1354–1367. doi: 10.1007/s11663-010-9436-7
- Wei GS. The application fundamental research on EAF steelmaking with submerged gas-solid injection [PhD dissertation]. University of Science and Technology Beijing, Beijing, 2019.
- Alexis J, Ramirez M, Trapaga G, et al. Modeling of a DC electric arc furnace – heat transfer from the arc. ISIJ Int. 2000;40(11):1089–1097. doi: 10.2355/isijinternational.40.1089