https://orcid.org/0000-0003-2958-4946
References
- Daviss JR. Alloying: understanding the basics. Materials Park (OH): ASM International; 2001; p. 193.
- Bhadeshia H, Honeycombe R. Steels: microstructure and properties. Oxford: Elsevier; 2017.
- Skobir D. High-strengh low-alloy (HSLA) steels. Mater Technol. 2011;45(4):295–301.
- Bhattacharya D. Tecnologia em Metalurgia. Mater. e Min. 2014;11(4):371–383.
- High strength low alloy (HSLA) steels for cold forming [Internet]. ArcelorMittal 2017. Available from: http://automotive.arcelormittal.com/europe/products/HYTSS/HSLA/EN
- Bakkaloğlu A. Effect of processing parameters on the microstructure and properties of an Nb microalloyed steel. Mater Lett. 2002;56:263–272. doi: 10.1016/S0167-577X(02)00453-6
- Gladman T. The physical metallurgy of microalloyed steels. London: Institute of Materials; 1997.
- Korczak P. Influence of controlled rolling condition on microstructure and mechanical properties of low carbon micro-alloyed steels. J Mater Process Technol. 2004;157–158(58):553–556. doi: 10.1016/j.jmatprotec.2004.07.113
- Sanz-García A, Fernández-Ceniceros J, Fernández-Martínez R, et al. Methodology based on genetic optimisation to develop overall parsimony models for predicting temperature settings on annealing furnace. Ironmak Steelmak. 2014;41(2):87–98. doi: 10.1179/1743281212Y.0000000094
- Yashchuk S, Rodionova I, Zaitsev A, et al. Effect of chemical composition and production parameters of hot rolling and recrystallization annealing in continuous hot dip galvanizing units on the structure and properties of high-strength low-alloy steels. Metallurgist. 2011;54(9–10):608–617. doi: 10.1007/s11015-011-9348-z
- Raji NA, Oluwole OO. Effect of soaking time on the mechanical properties of annealed cold-drawn low carbon steel. Mater Sci Appl. 2012;3:513–518.
- Janošec M, Schindler I, Vodárek V, et al. Microstructure and mechanical properties of cold rolled, annealed HSLA strip steels. Arch Civ Mech Eng. 2007;7(2):30–38. doi: 10.1016/S1644-9665(12)60208-8
- Hüysein A, Havv KZ, Ceylan K. Effect of intercritical annealing parameters on dual phase behaviour of commercial low-alloyed steels. J Iron Steel Res, Intern. 2010;17(4):73–78. doi: 10.1016/S1006-706X(10)60089-1
- Wu H, Speets R, Heeremans F, et al. Non-linear model predictive control of troughput and strip temperature for continuous annealing line. Ironmak Steelmak. 2015;41(2):87–98.
- Tottem GE, Funatani K, Xie L. Design of microstructures and properties of steel by hot and cold rolling. In: Tottem GE, Funatani K, Xie L, editors. Handbook of metallurgical process design. New York (NY): CRC Press; 2004. p. 59–61.
- Taylor SW, Wang S. Overheating steel in an annealing furnace. ANZIAM 2010, Queenstown, New Zealand, 31 Jan 2010–04 Feb 2010. Am Inst Phy. 2010;1168:1457–1460.
- Wu H, Speets R, Ozcan G, et al. Non-linear model predictive control to improve transient production of a hot dip galvanising line. Ironmak Steelmak. 2016;43(7):542–549. doi: 10.1080/03019233.2015.1126687
- Huo X, Mao X, Lu S. Effect of annealing temperature on recrystallization behaviour of cold rolled Ti-microalloyed steels. J Iron Steel Res. 2013;20(9):105–110. doi: 10.1016/S1006-706X(13)60164-8