Effect of aging treatment on microstructure and properties of additively manufactured maraging steel

References

• He BB, Hu B, Yen HW, et al. High dislocation density-induced large ductility in deformed and partitioned steel. Science. 2017;357:1029–1032. doi: 10.1126/science.aan0177
   PubMed Web of Science ®Google Scholar
• Jiang S, Wang H, Wu Y, et al. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation. Nature. 2017;544:460–464. doi: 10.1038/nature22032
   PubMed Web of Science ®Google Scholar
• Koyama M, Zhang Z, Wang M, et al. Bone-like crack resistance in hierarchical metastable nanolaminate steel. Science. 2017;355:1055–1057. doi: 10.1126/science.aal2766
   PubMed Web of Science ®Google Scholar
• Yin H, Lin J-X, Su Y-J, et al. The touchening designing of maraging steel. Mater Rev A. 2014;28(7):86–88.
   Google Scholar
• Murty SVSN, Manwatkar SK, Narayanan PR. Metallurgical analysis of a failed maraging steel shear screw used in the band separation system of a satellite launch vehicle. Defence Technol. 2016;12(5):380–387. doi: 10.1016/j.dt.2016.05.001
   Web of Science ®Google Scholar
• Yin H, Li J-X, Su Y-J, et al. Current situation and development of maraging steel. J Iron Steel Res. 2014;26(3):1–6.
   Google Scholar
• Verdiere A, Hofer C, De Waele S, et al. Precipitation in simultaneously nitrided and aged Mo-containing maraging steel. Mater Charact. 2017;131:21–30. doi: 10.1016/j.matchar.2017.06.014
   Web of Science ®Google Scholar
• Stiller K, Danoix F, Hättestrand M. Mo precipitation in a 12Cr-9Ni-4Mo-2Cu maraging steel. Mater Sci Eng: A. 1998;250(1):22–26. doi: 10.1016/S0921-5093(98)00531-0
   Web of Science ®Google Scholar
• Jägle E, Sheng Z, Kürnsteiner P, et al. Comparison of maraging steel micro- and nanostructure produced conventionally and by laser additive manufacturing. Materials (Basel). 2017;10(1):8–12. doi: 10.3390/ma10010008
   Web of Science ®Google Scholar
• Seikh AH, Halfa H, Baig M, et al. Microstructure characterization and corrosion resistance behavior of new cobalt-free maraging steel produced through ESR techniques. J Mater Eng Perform. 2017;26(4):1589–1597. doi: 10.1007/s11665-017-2568-z
   Web of Science ®Google Scholar
• Tian J, Shahzad MB, Wang W, et al. Role of Co in formation of Ni-Ti clusters in maraging stainless steel. J Mater Sci Technol. 2018;34(09):1671–1675. doi: 10.1016/j.jmst.2018.04.020
   Google Scholar
• Wang H, Jiang S-H, Wu Y, et al. A new generation of ultra-high strength steel strengthened by high-density and coherent nano-precipitation. Frontier Sci. 2018;12(1):45–50.
   Google Scholar
• Mutua J, Nakata S, Onda T, et al. Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel. Mater Design. 2017;139:486–497. doi: 10.1016/j.matdes.2017.11.042
   Web of Science ®Google Scholar
• Monkova K, Zetkova I, Kučerová L, et al. Study of 3D printing direction and effects of heat treatment on mechanical properties of MS1 maraging steel. Arch Appl Mech. 2019;89(5):791–804. doi: 10.1007/s00419-018-1389-3
   Web of Science ®Google Scholar
• Chongliang Z. Investigations on high deposition rate laser metal deposition for additive manufacturing application based on inconel 718. Changchun: University of Chinese Academy of Sciences; 2015.
   Google Scholar
• Yang Q-Y, Wu Y-D, Sha F. Miscrostructure and mechanical properties of inconel 625 alloy manufactured by selective laser melting. Mater Mech Eng. 2016;6(40):83–87.
   Google Scholar
• Mooney B, Kourousis KI, Raghavendra R. Plastic anisotropy of additively manufactured maraging steel: influence of the build orientation and heat treatments. Additive Manuf. 2019;25:19–31. doi: 10.1016/j.addma.2018.10.032
   Web of Science ®Google Scholar
• Abe F, Osakada K, Shiomi M, et al. The manufacturing of hard tools from metallic powders by selective laser melting. J Mater Process Technol. 2001;111(1):210–213. doi: 10.1016/S0924-0136(01)00522-2
   Web of Science ®Google Scholar
• Liu J. Tailoring the defects and microstructure and tensile properties investigation of h13 steel by select. J Mech Eng. 2018;54(16):101–107. doi: 10.3901/JME.2018.16.101
   Google Scholar
• Yin S, Chen C, Yan X, et al. The influence of aging temperature and aging time on the mechanical and tribological properties of selective laser melted maraging 18Ni-300 steel. Additive Manuf. 2018;22:592–600. doi: 10.1016/j.addma.2018.06.005
   Web of Science ®Google Scholar
• Tohru Aral, Gordon M.Baker, Charles E Bates, et al. ASM Handbook, Volum 4: heat treating. United States of America: ASM Internatonal, The Materials Information Company; 1991.
   Google Scholar
• Guo WF, Guo C, Zhu Q, et al. Heat treatment behavior of the 18Ni300 maraging steel additively manufactured by selective laser melting. Materials Science Forum. 2018;941:2160–2166. doi: 10.4028/www.scientific.net/MSF.941.2160
   Google Scholar
• Wang D, Song C, Yang Y, et al. Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts. Mater Design. 2016;100:291–299. doi: 10.1016/j.matdes.2016.03.111
   Web of Science ®Google Scholar
• Kürnsteiner P, Wilms MB, Weisheit A, et al. Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition. Acta Mater. 2017;129:52–60. doi: 10.1016/j.actamat.2017.02.069
   Web of Science ®Google Scholar
• Pardal JM, Tavares SSM, Terra VF, et al. Modeling of precipitation hardening during the aging and overaging of 18Ni-Co-Mo-Ti maraging 300 steel. J Alloys Compd. 2005;393:109–113. doi: 10.1016/j.jallcom.2004.09.049
   Web of Science ®Google Scholar
• LeBrun T, Nakamoto T, Horikawa K, et al. Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17-4PH stainless steel. Mater Design. 2015;81:44–53. doi: 10.1016/j.matdes.2015.05.026
   Web of Science ®Google Scholar
• Viswanathan UK, Dey GK, Asundi MK. Precipitation hardening in 350 grade maraging steel. Metall Trans A (Phys Metall Mater Sci). 1993;24(11):2429–2442. doi: 10.1007/BF02646522
   Web of Science ®Google Scholar
• Rohit B, Muktinutalapati NR. Austenite reversion in 18% Ni maraging steel and its weldments. Mater Sci Technol. 2017;34(8):1–8.
   Google Scholar