References
- Kawakami M, Takatani K, Brabie LC. Heat and mass transfer analysis of scrap melting in steel bath. Tetsu-to-Hagane. 1999;85:658–665. doi: 10.2355/tetsutohagane1955.85.9_658
- Pehlke RD, Goodell PD, Dunla RW. Kinetics of steel dissolution in molten pig iron. Trans Metall Soc AIME. 1964;233:1420–1427.
- Sun H, Liu Y, Lin C. Experimental observation of spherical scrap melting in hot metal. International Congress on the Science & Technology of Steelmaking, Beijing International Convention Center, Beijing, China, 2015. p. 136–139.
- Kim Y, Pehlke RD. Transient heat transfer during initial stages of steel scrap melting. Metall Mater Trans B. 1975;6:585–591. doi: 10.1007/BF02913852
- Li RH. The basis of mass transfer. Beijing: Beijing University Press; 1987.
- Don W. Perry’s chemical engineers’ handbook. 7th ed. Beijing: Science Press; 2001.
- Wright JK. Steel dissolution in quiescent and gas stirred Fe/C melts. Metall Mater Trans B. 1989;20:363–374. doi: 10.1007/BF02696988
- Yang WY. Thermal simulation experiments on scrap melting. Iron and Steel. 2017;52:27–35.
- Yang WY, Zhang XG, Yang Y. The study overview of utilizing scrap in converter steelmaking. Iron & Steel Scrap China. 2012;22:1–6.
- Kim YU, Pehlke R. Mass transfer during dissolution of a solid into liquid in the iron–carbon system. Metall Mater Trans A. 1974;5:2527–2532.
- Mineo K, Susumu M. Dissolution of steel cylinder into liquid Fe–C alloy. Tetsu-to-Hagane. 1967;53:983–997. doi: 10.2355/tetsutohagane1955.53.8_983
- Mineo K, Susumu M. Dissolution of steel cylinder into liquid Fe–C alloy (stirring of liquid iron in H.F. furnace— I). Tetsu-to-Hagane. 1966;52:537–539.
- Kosaka M, Minowa S. Mass-transfer from graphite cylinder into liquid Fe–C alloy. Tetsu-to-Hagane. 1967;53:1467–1477. doi: 10.2355/tetsutohagane1955.53.13_1467
- Isobe K, Maede H, Ozawa K, et al. Analysis of the scrap melting rate in high carbon molten iron. Tetsu-to-Hagane. 1990;76:2033–2040. doi: 10.2355/tetsutohagane1955.76.11_2033
- Olsson RG, Koump V, Perzak TF. Rate of dissolution of carbon-steel in molten iron–carbon alloys. Trans Metall Soc AIME. 1965;233:1654–1657.
- Shukla AK, Brahma D, Robertson DGC. Scrap dissolution in molten iron containing carbon for the case of coupled heat and mass transfer control. Metall Mater Trans B. 2013;44:1407–1427. doi: 10.1007/s11663-013-9905-x
- Kruskopf A. A model for scrap melting in steel converter. Metall Mater Trans B. 2015;46:1195–1206. doi: 10.1007/s11663-015-0320-3
- Gol’dfarb ÉM, Sherstov BI. Heat and mass transfer when melting scrap in an oxygen converter. J Eng Physic. 1970;18:342–347. doi: 10.1007/BF00828292
- Wu YK, Lacroix M. Numerical simulation of the melting of scrap metal in a circular furnace. Int J Heat Mass Trans. 1995;24:517–525. doi: 10.1016/0735-1933(95)00037-Y
- Deng S, Xu AJ, Yang G, et al. Analyses and calculation of steel scrap melting in a multifunctional hot metal ladle. Steel Res Int. 2018;90:1–10.
- Oeters F, Ni RM. Metallurgy of steeelmaking. Beijing: Metallurgical Industry Press; 1997.
- Szekely J, Chuang YK, Hlinka JW. The melting and dissolution of low-carbon steels in iron–carbon melts. Metall Mater Trans B. 1972;3:2825–2833. doi: 10.1007/BF02652849
- Guthrie RIL, Stubbs P. Kinetics of scrap melting in baths of molten pig iron. Can Metall Q. 1973;12:465–473. doi: 10.1179/cmq.1973.12.4.465
- Kosaka M, Minowa S. Mass-transfer from solid metal cylinder into liquid metal. Tetsu-to-Hagane. 1966;52:1748–1762. doi: 10.2355/tetsutohagane1955.52.12_1748