References
- Luo HW, Xiang R, Chen LF, et al. Modeling the decarburization kinetics in grain-oriented silicon steels. Chin Sci Bull. 2014;59:866–871. doi: 10.1360/csb2014-59-10-866
- Soenen B, Jacobs S, De Wulf M. Modelling decarbruization kinetics in electrical steels. Steel Res Int. 2005;76:425–428. doi: 10.1002/srin.200506032
- Zhang C, Xiang L, Dong TL, et al. Decarburizing Annealing of grain-oriented solicon steel. J Iron Steel Res. 2009;12:55–58.
- Chen YL, Zuo MF, Luo ZL, et al. The oretical and experimental study on surface decarburization of 60Si2Mn spring steel. Trans Mater Heat Treat. 2015;36:192–198.
- Yang SZ, Dai FQ, Guo Y. Numerical simulation analysis of the decarburization process of oriented silicon steel. J Wuhan Univer SciTechnol. 2016;39:253–258.
- Nomura M, Morimoto H, Toyama M. Calculation of ferrite decarburizing depth, considering chemical composition of steel and teating condition. ISIJ Int. 2000;40:619–623. doi: 10.2355/isijinternational.40.619
- Yamada S, Konno T, Goto S. Some behaviors and characteristics of decarburized layer in spheroidal graphite cast iron. Int JSocMaterEng Resour. 2010;10:88–92.
- Owadano T. Mechanism of decarburization in spheroidal graphite cast iron in consideration of carbonic solubility. J Japan Foundrymens Soci. 2011;77:381–386.
- Yamada S, Goto S, Aso S, et al. Growth mechanism of decarburized layer in spheroidal cast iron. JJapan Foundrymens Soc. 2011;73:219–224.
- Hong LK, Cheng R, Ai LQ, et al. Mechanism of carbon diffusion in the iron sheet during gas-solid decarburization. Trans Indian Inst Met. 2019;72:335–342. doi: 10.1007/s12666-018-1484-8
- Park JO, Long TV, Sasaki Y. Feasibility of solid-state steelmaking from cast iron-decarburization of rapidly solidified cast iron. ISIJ Int. 2012;52:26–34. doi: 10.2355/isijinternational.52.26
- Lee WH, Park JO, Lee JS, et al. Solid state steelmaking by decarburisation of rapidly solidified high carbon iron sheet. Ironmak Steelmak. 2012;39:530–534. doi: 10.1179/1743281212Y.0000000032
- McDonald C. Solid state steelmaking: process technical and economic viability. Ironmak Steelmak. 2012;39:487–489. doi: 10.1179/0301923312Z.000000000138
- Xia DS, Yang P, Xie L, et al. Influence of heating rate on the decarburized annealing microstructure and texture in low-carbon non-oriented electrical steel. Acta Metall Sinica. 2014;50:1437–1445.
- Ebrahim SS, Mostafa M, Jalil VK. Anew approach in solid steelmaking from thin cast iron sheets through decarburization in CaCO3 pack. ISIJ Int. 2018;58:1791–1800. doi: 10.2355/isijinternational.ISIJINT-2018-250
- Cheng R, Ai LQ, Li YQ, et al. Influence of thickness on gas-solid decarburization reaction of Fe-C alloy sheet. J Iron Steel Res. 2017;29:556–561.
- Liu YB, Zhang W, Tong Q, et al. Effects of Si and Cr on complete decarburization behavior of high carbon steels in atmosphere of 2 vol.% O2. J Iron Steel Res Int. 2016;23:1316–1322. doi: 10.1016/S1006-706X(16)30194-7
- Callister WD, Rethwisch DG. Material science and engineering an introduction. ResExplor Lab. 2007;7:227–246.
- Zhao XM, Zhang K, Yang Y. Investigation of surface decarburization behavior in 42 CrMo steel. J Iron Steel Res. 2019;31:196–201.
- Chen H, Zhang CY, Zhu JN, et al. Austenite/ferrite interface migration and alloying elements partitioning: an overview. Acta Metal Sinica. 2018;54:217–225.