Effect of emptying time on multiphase and mixing behaviours during grade change of a five-strand bloom tundish

References

• Sinha AK. On steel flow and mixing in tundish. Ironmak Steelmak. 1998;25:387.
   Web of Science ®Google Scholar
• Mazumdar D, Vassilicos A. Physical modelling of thermal effects tundish metallurgy: Towards increased productivity and clean steel. T Indian I Metals. 2013;66:597–610. doi: 10.1007/s12666-013-0305-3
   Web of Science ®Google Scholar
• Merder T. Modelling the influence of changing constructive parameters of multi-strand tundish on steel flow and heat transfer. Ironmak Steelmak. 2016;43:758–768. doi: 10.1080/03019233.2016.1209825
   Web of Science ®Google Scholar
• Cwudziński A. Mathematical simulation and water modelling of liquid steel interaction with an argon bubble curtain in a one-strand continuous casting tundish. J S Afr I Min Metall. 2018;118:544–554.
   Web of Science ®Google Scholar
• Cwudziński A. Numerical simulations and industrial experiments of liquid steel alloying process in one strand slab tundish. Ironmak Steelmak. 2015;42:132–138. doi: 10.1179/1743281214Y.0000000214
   Web of Science ®Google Scholar
• Chatterjee S, Chattopadhyay K. Transient steel quality under non-isothermal conditions in a multi-strand billet caster tundish: part I. Analysis of fluid flow, thermal behaviour and inclusion behaviour. Ironmak Steelmak. 2017;44:403–412. doi: 10.1080/03019233.2016.1214014
   Web of Science ®Google Scholar
• Chatterjee S, Chattopadhyay K. Transient steel quality under non-isothermal conditions in a multi-strand billet caster tundish: part II. Effect of a flow-control device. Ironmak Steelmak. 2017;44:413–420. doi: 10.1080/03019233.2016.1214015
   Web of Science ®Google Scholar
• Cwudziński A. Numerical, physical, and industrial experiments of liquid steel mixture in one strand slab tundish with flow control devices. Steel Res Int. 2014;85:623–631. doi: 10.1002/srin.201300079
   Web of Science ®Google Scholar
• Cwudziński A. Physical and mathematical simulation of liquid steel mixing zone in one strand continuous casting tundish. Int J Cast Metal Res. 2017;30:50–60. doi: 10.1080/13640461.2016.1234223
   Web of Science ®Google Scholar
• Kant S, Jha PK, Kumar P. Investigation of effect of dam on intermixing during ladle changeover in six strand billet caster tundish. Ironmak Steelmak. 2011;38:391–397. doi: 10.1179/1743281211Y.0000000007
   Web of Science ®Google Scholar
• Siddiqui MIH, Jha PK. Assessment of turbulence models for prediction of intermixed amount with free surface variation using coupled level-set volume of fluid method. ISIJ Int. 2014;54:2578–2587. doi: 10.2355/isijinternational.54.2578
   Web of Science ®Google Scholar
• Chattopadhyay K, Isac M, Guthrie RIL. Modelling of non-isothermal melt flows in a four strand delta shaped billet caster tundish validated by water model experiments. ISIJ Int. 2012;52:2026–2035. doi: 10.2355/isijinternational.52.2026
   Web of Science ®Google Scholar
• Mazumdar D. Transient, multiphase simulation of grade intermixing in a tundish under constant casting rate and validation against physical modeling. JOM. 2018;70:2139–2147. doi: 10.1007/s11837-018-2988-8
   Web of Science ®Google Scholar
• Siddiqui MIH, Jha PK. Effect of inflow rate variation on intermixing in a steelmaking tundish during ladle change-over. Steel Res Int. 2016;87:733–744. doi: 10.1002/srin.201500210
   Web of Science ®Google Scholar
• Siddiqui MIH, Kim MH. Two-phase numerical modeling of grade intermixing in a steelmaking tundish. Metals. 2019;9:40. doi: 10.3390/met9010040
   Web of Science ®Google Scholar
• Muralikrishna A, Bagui S, Mazumdar D. Modeling and measurements of intermixing time in a water model of a four strand steelmaking tundish system. T Indian I Metals. 2013;66:281–295. doi: 10.1007/s12666-013-0270-x
   Web of Science ®Google Scholar
• Amorim LLC, Silva CA, Resende AD, et al. A study of intermix in a six-strand billet caster. Metall Mater Trans A. 2018;49:6308–6324. doi: 10.1007/s11661-018-4915-6
   Google Scholar
• Li H, Wang Q, Jiang J, et al. Analysis of factors affecting free surface vortex formation during steel teeming. ISIJ Int. 2016;56:94–102. doi: 10.2355/isijinternational.ISIJINT-2015-096
   Web of Science ®Google Scholar
• Morales RD, Dávila-Maldonado O, Calderón I, et al. Physical and mathematical models of vortex flows during the last stages of steel draining operations from a ladle. ISIJ Int. 2013;53:782–791. doi: 10.2355/isijinternational.53.782
   Web of Science ®Google Scholar
• Machado-Lopez MM, Ramos-Banderas JA, Torres-Alonso E, et al. Multiphase modelling of liquid steel transfer from tundish to curved billet mould by open stream and equipped with SEN. Ironmak Steelmak. 2013;40:326–334. doi: 10.1179/1743281212Y.0000000053
   Web of Science ®Google Scholar
• ANSYS Fluent 15.0 Theory Guide, Southpointe, 2013.
   Google Scholar
• Kumar A, Mazumdar D, Koria SC. Modeling of fluid flow and residence time distribution in a four-strand tundish for enhancing inclusion removal. ISIJ Int. 2008;48:38–47. doi: 10.2355/isijinternational.48.38
   Web of Science ®Google Scholar
• Zhang H, Fang Q, Luo R, et al. Effect of ladle changeover condition on transient three-phase flow in a five-strand bloom casting tundish. Metall Mater Trans B. 2019;50:1461–1475. doi: 10.1007/s11663-019-01572-6
   Web of Science ®Google Scholar
• Zhang H, Fang Q, Deng S, et al. Multiphase flow in a five-strand tundish using trumpet ladle shroud during steady-state casting and ladle change-over. Steel Res Int. 2019;90:1800497. doi: 10.1002/srin.201800497
   Web of Science ®Google Scholar