References
- Zhao J, Loo CE. Dependence of flame front speed on iron ore sintering conditions. Min Proc Extr Metall. 2016;125(3):165–171. https://doi.org/DOI:10.1080/03719553.2016.1166565.
- Loo CE. A perspective of goethitic ore sintering fundamentals. ISIJ Int. 2005;45(4):436–448.
- Lovel RR, Vining KR, Dell ’Amico M. The influence of fuel reactivity on iron ore sintering. ISIJ Int. 2009;49(2):195–202.
- Oyama N, Higuchi T, Machida S, et al. Effect of high-phosphorous iron ore distribution in quasiparticle on melt fluidity and sinter bed permeability during sintering. ISIJ Int. 2009;49(5):650–658.
- Yamaguchi Y, Kamijo C, Matsumura M, et al. Improvement of permeability of sintering bed by adding dry particles to granulated raw materials. ISIJ Int. 2013;53(9):1538–1544.
- Greus S. Development of a permeability test rig [Bachelor’s thesis]. Chemical Engineering, Helsinki Metropolia University of Applied Sciences; 29 October 2015.
- Kaymak Y, Hauck T, Hillers M. Iron ore sintering process model to study local permeability control. Comsol Conference 2017; 2017 Oct. Rotterdam; 2017.
- Fan X, Chen X, Wang Y. Expert system for sintering process control. In: P Vizureanu, editor. Source: expert systems, book. Croatia: INTECH; January 2010. p. 238. downloaded from SCIYO.COM, ISBN 978-953-307-032-2.
- Goswami A, Selvan VT, Kumar S, et al. An intelligent permeability optimization system at sinter plant of Rourkela steel plant. Int J Appl Res Mech Eng (IJARME). 2013;3(2):52–55. ISSN: 2231–5950
- Tupkary RH, Tupkary VR. An introduction to modern iron making. 4th ed. Delhi: Khanna Publishers. 2014. Fourth Reprint.
- Venkata ramana R, Gupta SS, Kapur PC. Int J Miner Process. 1999;57:43.
- Khosa J, Manuel J. ISIJ Int. 2007;47:965–972.
- Agrawal R, Kar KL, Pathak S, et al. Importance of optimum moisture in sinter raw mix to increase the sinter strength. Int J Comput Sci Appl. April / May 2009;2(1):27–29.
- Fan X, Chen X, Wang Y. Expert system for sintering process control. IntechOpen; 2010, https://doi.org/DOI:10.5772/7073, Open access peer-reviewed chapter.
- Liu S, Lyu Q, Liu X, et al. A prediction system of burn through point based on gradient boosting decision tree and decision rules. ISIJ Int. 2019;59(12):2156–2164.
- Wang DZ, Qiu GZ, Hu YH. Mineral processing. Vol. 408. Beijing: Science Press; 2008.
- Voice EW, Brooks SH, Gledhill PK. The permeability of sinter beds. JISI. 1953;1:136–139.
- [cited 2020 Dec 10]. Available from: https://www.primetals.com/press-media/metals-magazine/issue-01-2019/the-secret-is-in-the-mix.
- Vannocci M, Colla V, Pulito P, et al. Advanced monitoring system of sinter plant. Ironmak Steelmak. 2015;42(6):424–432. https://doi.org/DOI:10.1179/1743281214Y.0000000245.
- Goswami A, Biswal AK, Selvan VT, et al. Improvement in sinter productivity with intelligent mathematical model based control system. Int J Adv Res Comput Commun Eng. 2015;4(10):555–558.