References
- Zhang M, Ning YX, Zhang J, et al. Forming performance of 800 MPa grade Advanced high strength steels. Appl Mech Mater. 2014;455:173–178. doi:https://doi.org/10.4028/www.scientific.net/AMM.455.173.
- Esener E, Sönmez E, Özsoy M, et al. Determining springback behavior of high-strength steels via channel forming process. Acta Phys Pol A. 2017;132:1010–1012. doi:https://doi.org/10.12693/APhysPolA.132.1010.
- Cornette D, Galtier A. Influence of the forming process on crash and fatigue performance of high strength steels for automotive components. SAE Tech Pap. 2002;111:411–417. doi:https://doi.org/10.4271/2002-01-0642.
- Zhang M, Zhang J, Ning Y, et al. Springback Behavior of Advanced High Strength Steel (AHSS) CP800; 2015. doi:https://doi.org/10.4028/www.scientific.net/AMR.820.45
- Ma N. Prediciton of springback for high strength steel sheets. Aachen: Rheinisch -Westfälischen Technischen Hochschule Aachen; 2013.
- Demeri MY. Advanced high-strength steels: science, technology, and applications. Ohio: ASM International; 2013.
- Zhang M, Li Q, Huang C, et al. Weldability of Ti-Microalloyed Advanced High Strength Steel CP 800 Weldability of Ti-microalloyed Advanced High Strength Steel CP 800; 2016. doi:https://doi.org/10.4028/www.scientific.net/AMR.634-638.2899
- Heibel S, Dettinger T, Nester W, et al. Damage mechanisms and mechanical properties of high-strength multiphase steels; 2018.
- Mori K, Akita K, Abe Y. Springback behaviour in bending of ultra-high-strength steel sheets using CNC servo press. Int J Mach Tools Manuf. 2007;47:321–325. doi:https://doi.org/10.1016/j.ijmachtools.2006.03.013.
- Pourboghrat F, Chu E. Springback in plane strain stretch/draw sheet forming. Int J Mech Sci. 1995;37:327–341. doi:https://doi.org/10.1016/0020-7403(95)93523-9.
- Yoshida T, Sato K, Isogai E, et al. Springback problems in forming of high-strength steel sheets and countermeasures. Nippon Steel Tech Rep. 2013:103–02.
- Karaağaç İ. The evaluation of process parameters on springback in V-bending using the flexforming process. Mater Res. 2017;20:1291–1299. doi:https://doi.org/10.1590/1980-5373-MR-2016-0799.
- Firat M, Kaftanoglu B, Eser O. Sheet metal forming analyses with an emphasis on the springback deformation. J Mater Process Technol. 2008;196:135–148. doi:https://doi.org/10.1016/j.jmatprotec.2007.05.029.
- Zong Y, Liu P, Guo B, et al. Springback evaluation in hot v-bending of Ti-6Al-4V alloy sheets. Int J Adv Manuf Technol. 2014;76:577–585. doi:https://doi.org/10.1007/s00170-014-6190-z.
- Aydin K, Karaaǧaç İ. The experimental investigation of formability and springback in laser welded DP600 sheets. Mater Res Express. 2019;6. doi:https://doi.org/10.1088/2053-1591/ab5f26.
- Ma Wp, Wang By, Xiao Wc, et al. Springback analysis of 6016 aluminum alloy sheet in hot V-shape stamping. J Cent South Univ. 2019;26:524–535. doi:https://doi.org/10.1007/s11771-019-4024-8.
- Kim HS, Koç M. Numerical investigations on springback characteristics of aluminum sheet metal alloys in warm forming conditions. J Mater Process Technol. 2008;204:370–383. doi:https://doi.org/10.1016/j.jmatprotec.2007.11.059.
- Jian L, Jun Z, Hong-lei S, et al. Improvement of springback prediction of wide sheet metal air bending process. J Central South Univ Technol. 2008;15:310–315. doi:https://doi.org/10.1007/s11771−008−0478−9
- Karaağaç İ, Önel T, Uluer O. The effects of local heating on springback behaviour in v bending of galvanized DP600 sheet. Ironmak Steelmak. 2019:9233. doi:https://doi.org/10.1080/03019233.2019.1615308
- Sen N. Experimental investigation of the formability of ultrahigh-strength sheet material using local heat treatment. Ironmak Steelmak. 2019: 1–7. doi:https://doi.org/10.1080/03019233.2019.1680176.
- Tekaslan Ö, Gerger N, Şeker U. Determination of spring-back of stainless steel sheet metal in “V” bending dies. Mater Des. 2008;29:1043–1050. doi:https://doi.org/10.1016/j.matdes.2007.04.004.
- Hama T, Sakai T, Fujisaki Y, et al. Time-dependent springback of a commercially pure titanium sheet. Procedia Eng. 2017;207:263–268. doi:https://doi.org/10.1016/j.proeng.2017.10.772.
- Buang MS, Abdullah SA, Saedon J. Effect of die and punch radius on springback of stainless steel sheet metal in the air V-die bending process. J Mech Eng Sci. 2015;8:1322–1331. doi:https://doi.org/10.15282/jmes.8.2015.7.0129.
- Vasudevan D, Srinivasan R, Padmanabhan P. Effect of process parameters on springback behaviour during air bending of electrogalvanised steel sheet. J Zhejiang Univ Sci A. 2011;12:183–189. doi:https://doi.org/10.1631/jzus.A1000055.