References
- Wang S. Metallurgical behaviours of gas bottom blowing in converter. Steelmaking (in Chinese). 1986;4:24–30.
- Wang S. Gas supply model of bottom blowing CO2 in converter. Steelmaking (in Chinese). 1989;4:1–8.
- Blostein P, Patten P, Gortan D, et al. ‘CO2 stirring in the converter at B.H.P.-WHYALLA’, Steelmaking Conference Proceedings, 1990, 315–318.
- Jin R, Zhu R, Feng L, et al. Experimental study of steelmaking with CO2 and O2 mixed blowing. J Univ Sci Technol Beijing(in Chinese). 2007;29(Supplement 1):78.
- Zhu R, Bi XR, Lv M, et al. Research on steelmaking dust based on difference of Mn, Fe and Mo vapor pressure. Advanced Materials Research. 2017;278:1216–1222.
- Yi C, Zhu R, Chen B, et al. Experimental research on reducing the dust of BOF in CO2 and O2 mixed blowing steelmaking process. ISIJ Int. 2009;49(11):1694–1699.
- Lv M, Zhu R, Wei X, et al. Research on top and bottom mixed blowing CO2 in converter steelmaking process. Steel Res Int. 2012;83(1):11–15.
- Lv M, Zhu R, Yang L. High efficiency dephosphorization by mixed injection during steelmaking process. Steel Res Int. 2019;90(3):1800454.
- Wang XL, Zhu R, Zhang BL, et al.Research of CO2-O2 mixed injection steelmaking in 300t converter. Pittsburgh Mater. Sci. Technol. Conf. 2017. 712–718.
- Breuer G, Trömel G, Engell HJ. Archiv für das Eisenhüttenwesen. 1968;39(8):553–557.
- Zong JH, Yoon JK. Metall Trans B. 1990;21(1):49–57.
- Zughbi HD. Scand J Metall. 2003;32(4):194–202.
- Turdogan E. Fundamentals of steelmaking. London : The Inst. of Materials; 1996.
- Sain DR, Belton GR. Interfacial reaction kinetics in the decarburization of liquid iron by carbon dioxide. Metall Trans B. 1976;7(2):235–244.
- Sain D, Belton G. The influence of sulfur on interfacial reaction kinetics in the decarburization of liquid iron by carbon dioxide. Metall Trans B. 1978;9(3):403–407.
- Cramb A, Belton G. Studies of the interfacial kinetics of the reaction of CO2 with liquid iron by the14CO2-CO isotope exchange reaction. Metall Trans B. 1981;12(4):699–704.
- Lee H, Rao Y. Rate of decarburization of iron-carbon melts: Part I. Experimental determination of the effect of sulfur. Metall Trans B. 1982;13(3):403–409.
- Lee H, Rao Y. Rate of decarburization of iron-carbon melts: Part II. A mixed-control model. Metall Trans B. 1982;13(3):411–421.
- Mannion F, Fruehan R. Decarburization kinetics of liquid Fe−Csat alloys by CO2. Metall Mater Trans B. 1989;20(6):853–861.
- Bergman TL, Incropera FP, DeWitt DP, et al. Fundamentals of heat and mass transfer. New Jersey: John Wiley; 2011.
- Hu X, Matsuura H, Tsukihashi F. Interfacial reaction between CO2-CO gas and molten iron oxide containing P2O5. Metall Mater Trans B. 2006;37(3):395–401.
- Rout BK, Brooks G, Rhamdhani MA, et al. Dynamic model of basic oxygen steelmaking process based on multizone reaction kinetics: modeling of decarburization. Metall Mater Trans B. 2018;49(3):1022–1033.
- Wang XH. Iron and steel making: steelmaking. Beijing: Higher Education Press; 2007.
- Ramakrishnan S, Kumar R, Kuloor N. Studies in bubble formation – I bubble formation under constant flow conditions. Chem Eng Sci. 1969;24(4):731–747.
- Järvinen MP, Pisilä S, Kärnä A, et al. Fundamental mathematical model for AOD process. Part I: derivation of the model. Steel Res Int. 2011;82(6):638–649.
- Pan S-M, Chiang J-D, Hwang W-S. Simulation of large bubble/molten steel interaction for Gas-injected ladle. J Mater Eng Perform. 1999;8(2):236–244.
- Higbie R. the rate of absorption of a pure gas into a still liquid during short periods of exposure. Trans AIChE. 1935;31:365–389.
- Brooks G, Pan Y, Coley K. Modeling of trajectory and residence time of metal droplets in slag-metal-gas emulsions in oxygen steelmaking. Metall Mater Trans B. 2005;36(4):525–535.