References
- Kumar A. Modeling of fluid flow and residence time distribution in a four-strand tundish for enhancing inclusion removal. ISIJ Int. 2008;48:38–47.
- Tkadleckova M. Numerical analysis of RTD curves and inclusions removal in a multi-strand asymmetric tundish with different configuration of impact pad. Metals. 2020;10:849.
- Zhang L. Fluid flow and inclusion removal in continuous casting tundish. Metall Mater Trans B. 2000;31:253–266.
- Sahai Y. Tundish technology for casting clean steel: a review. Metall Mater Trans B. 2016;47:2095–2106.
- Qi X. Physical simulation of liquid steel flowage in tundish for six-strand billet and metallurgical effect. J Iron Steel Res Int. 2006;18:11–15.
- Zhang H, Fang Q, Ni H, et al. Effect of ladle changeover condition on transient three-phase flow in a five-strand bloom casting tundish. Metall Mater Trans B. 2019;50:1461–1475.
- Zhang H, Fang Q, Ni H, et al. Multiphase flow in a five-strand tundish using trumpet ladle shroud during steady-state casting and ladle change-over. Steel Res Int. 2019;90:1800497.
- Singh S. Physical modelling of steel flow in continuous casting tundish. Ironmak Steelmak. 1993;20:221–230.
- Tripathi A. Mathematical modelling of flow control in a tundish using electro-magnetic forces. Appl Math Model. 2011;35:5075–5090.
- Tripathi A. Numerical investigation of electro-magnetic flow control phenomenon in a tundish. ISIJ Int. 2012;52:447–456.
- Wu G, Tang H, Xiao H, et al. Physical simulation on a 7-strand continuous casting tundish with channel type induction heating. Iron Steel. 2017;52:20–26.
- Tang H, Guo L, Zhang J, et al. Hydrodynamic modeling and mathematical simulation on flow field and inclusion removal in a seven-strand continuous casting tundish with channel type induction heating. Metals. 2018;8:374.
- Mabuchi M. Investigation of the purification of molten steel by using tundish heater: development on the controlling method of casting temperature in continuous casting. ISIJ Int. 1984;70:118.
- Wang Q. Modeling of a thermo-electromagneto-hydrodynamic problem in continuous casting tundish with channel type induction heating. ISIJ Int. 2014;54:311–320.
- Yue Q. Magnetohydrodynamic flows and heat transfer in a twin-channel induction heating tundish. Ironmak Steelmak. 2017;44:227–236.
- Yang B. Simulating the magnetic field/transfer phenomenon of the tundish with channel type inducting heating. IOP Conf Series Mater Sci Eng. 2018;424:012060.
- Miura R. Tundish induction heater of No.2 continuous caster at yawata works. Tetsu-to-Hagane. 1995;81:30–33.
- Yoshii Y. Investigation of the purification of molten steel by using tundish heater: development on the controlling method of casting temperature in continuous casting. Tetsu-to-Hagane. 2009;71:1474–1481.
- Okura T. High-performance prediction of molten steel temperature in tundish through gray-box model. ISIJ Int. 2013;53:76–80.
- Davidson PA. Magnetohydrodynamics in materials processing. Annu Rev Fluid Mech. 1999;31:273–300.
- Zhang X, Li S, Zhang J, et al. Analyses of the metallurgical effects of three-strand asymmetric tundish during steady state and ladle change period. J Iron Steel Res Int. 2019;31:15–23.
- Launder BE. The numerical computation of turbulent flows. Comput Method Appl M. 1974;3:269–289.
- Lai KYM. Mathematical modeling of flows in large tundish systems in steelmaking. Metall Mater Trans B. 1986;17:449–459.
- Chakraborty S, Sahai Y. Mathematical modeling of melt flow and heat transfer in continuous casting tundishes. IISC. Tokyo: Sixth Int Iron Steel Cong. 1990;3:189–196.
- Yang B. Fluid flow and heat transfer in a tundish with channel type induction heating. Steel Res Int. 2018;89:1800173.
- Tang H, Li X, Zhang J, et al. Fluid flow and heat transfer in a tundish with channel induction heating for sequence casting with a constant superheat control. Acta Metall Sin. 2020;56:63–76.
- Sahai Y. Melt flow characterization in continuous casting tundishes. ISIJ Int. 1996;36:667–672.
- Wang Q, Shi Y, Li B, et al. Inclusions behavior and removal in tundish with induction heating. J Northeast Univ. 2014;35:1442–1446.