Combined impacts of thickness and bending angle on springback of 1000DP steel sheets

References

• Ikumapayi OM, Akinlabi ET, Madushele N, et al. A brief overview of bending operation in sheet metal forming. In: SS Emamian, editor. Advances in manufacturing Engineering lecture notes mechanical Engineering. Singapore: Springer Nature Singapore Pte Ltd.; 2020. p. 149–159.
   Google Scholar
• Zhang Q-F, Cai Z-Y, Zhang Y, et al. Springback compensation method for doubly curved plate in multi-point forming. Mater Des. 2013;47:377–385.
   Web of Science ®Google Scholar
• Serrenho AC, Norman JB, Allwood JM. The impact of reducing car weight on global emissions: the future fleet in Great Britain. Philos Trans R Soc A Math Phys Eng Sci. 2017;375;20160364.
   PubMed Web of Science ®Google Scholar
• Tang L, Wang H, Li G. Advanced high strength steel springback optimization by projection-based heuristic global search algorithm. Mater Des. 2013;43:426–437.
   Web of Science ®Google Scholar
• Kalpakjian S, Schmid SR. Manufacturing Engineering and technology. 7th ed.. London: Pearson; 2013.
   Google Scholar
• Tekiner Z. An experimental study on the examination of springback of sheet metals with several thicknesses and properties in bending dies. J Mater Process Technol. 2004;145:109–117.
   Web of Science ®Google Scholar
• Garcia-Romeu ML, Ciurana J, Ferrer I. Springback determination of sheet metals in an air bending process based on an experimental work. J Mater Process Technol. 2007;191:174–177.
   Web of Science ®Google Scholar
• Tekaslan Ö, Gerger N, Şeker U. Determination of spring-back of stainless steel sheet metal in “V” bending dies. Mater Des. 2008;29:1043–1050.
   Web of Science ®Google Scholar
• Ozturk F, Toros S, Kilic S. Tensile and spring-back behavior of DP600 advanced high strength steel at warm temperatures. J Iron Steel Res Int. 2009;16:41–46.
   Web of Science ®Google Scholar
• Kılıç S. Investigation of springback behaviour of DP600 steel. Niğde: Nigde University; 2009.
   Google Scholar
• Stachowicz F, Trzepiecinski T, Pieja T. Warm forming of stainless steel sheet. Arch Civ Mech Eng. 2010;10:85–94.
   Web of Science ®Google Scholar
• Thipprakmas S, Phanitwong W. Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique. Mater Des. 2011;32:4430–4436.
   Web of Science ®Google Scholar
• Ahmed GMS, Ahmed H, Mohiuddin MV, et al. Experimental evaluation of springback in mild steel and its validation using LS-DYNA. Procedia Mater Sci. 2014;6:1376–1385.
   Google Scholar
• Gautam V, Kumar P, Deo ASS.. Effect of punch profile radius and localised compression on springback in v-bending of high strength steel and its fea simulation.. International Journal of Mechanical Engineering and Technology (IJMET). 2012;3(3):517–530.
   Google Scholar
• Ma Z, Tong GQ, Chen F, et al. Grain size effect on springback behavior in bending of Ti-2.5Al-1.5Mn foils. J Mater Process Technol. 2015;224:11–17.
   Web of Science ®Google Scholar
• Quadfasel A, Lohmar J, Hirt G. Investigations on springback in high manganese TWIP-steels using U-profile draw bending. Procedia Eng. 2017;207:1582–1587.
   Google Scholar
• Nakagawa Y, Mori KI, Yashima S, et al. Springback behaviour and quenchability in hot stamping of thick sheets. Procedia Manuf. 2018;15:1071–1078.
   Google Scholar
• Xu Z, Peng L, Bao E. Size effect affected springback in micro/meso scale bending process: experiments and numerical modeling. J Mater Process Technol. 2018;252:407–420.
   Web of Science ®Google Scholar
• Xiao W, Huang L, Li J, et al. Investigation of springback during electromagnetic-assisted bending of aluminium alloy sheet. Int. J. Adv. Manuf. Technol. 2019;105:375–394.
   Web of Science ®Google Scholar
• Hetz P, Suttner S, Merklein M. Investigation of the springback behaviour of high-strength aluminium alloys based on cross profile deep drawing tests. Procedia Manuf. 2020;47:1223–1229.
   Google Scholar
• Béres G, Lukács Z, Tisza M. Springback evaluation of tailor welded blanks at V-die bending made of DP steels. Procedia Manuf. 2020;47:1366–1373.
   Google Scholar
• Şen N, Taşdemir V. Experimental and numerical investigation of the springback behaviour of CP800 sheet after the V-bending process. Ironmak Steelmak. 2021;0:1–8.
   Google Scholar
• Chabok A, Galinmoghaddam E, De Hosson JTM, et al. Micromechanical evaluation of DP1000-GI dual-phase high-strength steel resistance spot weld. J Mater Sci. 2019;54:1703–1715.
   PubMed Web of Science ®Google Scholar
• SSAB. Docol 1000DP dual phase automotive steel; Forthcoming [cited 2021 Aug 14]. Available from: https://www.ssab.com/products/brands/docol/products/docol-1000dp.
   Google Scholar
• Ispatguru. Dual phase steels; 2014. Available from: https://www.ispatguru.com/dual-phase-steels/.
   Google Scholar
• SSAB. Docol® 1000DP Data sheet 2117;, 2020.
   Google Scholar
• Fonstein N. Dual-phase steels. In: Automotive steels. Elsevier; 2017. p. 169–216.
   Google Scholar
• AZO Materials. Structural steel – S235, S275, S355 chemical composition, mechanical properties and common applications; 2012. Available from: https://www.azom.com/article.aspx?ArticleID = 6022.
   Google Scholar
• Metalurji K. 1.2367 Sıcak İş Takım Çeliği; Forthcoming [cited 2021 Oct 17]. Available from: http://kalitemetalurji.com.tr/urunlerimiz/sicak-is-takim-celikleri/1-2367-sicak-is-takim-celigi/.
   Google Scholar
• Chan TC, Hong YP, Yu JH. Effect of moving structure on the spatial Accuracy and compensation of the Coordinate Measuring machine. Int J Precis Eng Manuf. 2021;22:1551–1561.
   Web of Science ®Google Scholar
• Hexagon Metrology. Romer Absolute Arm VDI/VDE 2617-9 : 2009 specifications; 2015 [cited 2021 Aug 14]. Available from: http://apps.hexagon.se/downloads123/hxrom/romer/general/brochures/ROMER VDI-VDE Factsheet_en.pdf.
   Google Scholar
• Naresh PK. Laser cutting technique: A literature review. Materials Today: Proceedings. 2021.https://doi.org/10.1016/j.matpr.2021.08.250.
   Google Scholar
• Dikova T, Stavrev D, Misra B, et al. Dimensions Accuracy in Different Laser Cutting Schemes. International Virtual Journal “Machines, Technologies, Materials”. 2011: 15–18.
   Google Scholar
• Instron. 8801 Servohydraulic fatigue testing system; 2016 [cited 2021 Aug 14]. Available from: www.instron.com.
   Google Scholar
• Mukerjee R, Wu C-F. A modern theory of factorial design. New York: Springer; 2006.
   Google Scholar
• Hooda A, Nanda A, Jain M, et al. Optimization and evaluation of gastroretentive ranitidine HCl microspheres by using design expert software. Int J Biol Macromol. 2012;51:691–700.
   PubMed Web of Science ®Google Scholar
• Benson S. Bending Basics: The hows and whys of springback and springforward. The Fabricator; 2014 [cited 2021 Oct 17]. Available from: https://www.thefabricator.com/thefabricator/article/bending/bending-basics-the-hows-and-whys-of-springback-and-springforward.
   Google Scholar
• Liu Q, Wang L. t-Test and ANOVA for data with ceiling and/or floor effects. Behav Res Methods. 2021;53:264–277.
   PubMed Web of Science ®Google Scholar
• Ustaoglu A, Kursuncu B, Alptekin M, et al. Performance optimization and parametric evaluation of the cascade vapor compression refrigeration cycle using Taguchi and ANOVA methods. Appl Therm Eng. 2020;180:115816.
   Web of Science ®Google Scholar
• Saleem A, Hussain A, Chaudhary A, et al. Acid hydrolysis optimization of pomegranate peels waste using response surface methodology for ethanol production. Biomass Convers Biorefinery. 2020.https://doi.org/10.1007/s13399-020-01117-x.
   Google Scholar