Mathematical modelling of the liquid/liquid mass transfer behaviour in gas stirred ladles

References

• Han Q. Metallurgical process dynamics. Metall Ind Press. 1983:242-243.
   Google Scholar
• Conejo A. Physical and mathematical modelling of mass transfer in ladles due to bottom gas stirring: a review. Processes. 2020;8:750–772.
   Web of Science ®Google Scholar
• Kim S, Fruehan R. Physical modeling of liquid/liquid mass transfer in gas stirred ladles. Metall Trans B. 1987;18:381–390.
   Google Scholar
• Koria S. Studies of the bath mixing intensity in converter steelmaking processes. Can Metall Q. 1992;31:105–112.
   Web of Science ®Google Scholar
• Li X, Yin Z. Mass transfer to liquid-liquid interface. Acta Metall Sin. (Engl. Lett.). 1996;9:151–156.
   Google Scholar
• Mietz J, Schneider S, Oeters F. Model experiments on mass transfer in ladle metallurgy. Steel Res. 1991;62:1–9.
   Google Scholar
• Clinton S, Perona J. Mass transfer in a bubble-agitated liquid-liquid system. Ind Eng Chem Fundam. 1982;21:269–271.
   Web of Science ®Google Scholar
• Gaye H, Gatellier C, Riboud P. Physico-chemical aspects of the ladle desulphurization of iron and steel. Foundry Processes. 1988: 333–356.
   Google Scholar
• Ilegbusi O. The role of gas plumes in agitation and mass transfer in metallurgical systems. Steel Res. 1994;65:534–540.
   Google Scholar
• Inada S, Watanabe T. The model experiment on the reaction between the liquid and the swarms of gas bubbles by NaOH-CO2 system. Trans Iron Steel Inst Jpn. 1977;63:37–44.
   Google Scholar
• Sakaguchi K, Ito K. Measurement of the volumetic mass transfer coefficient of gas-stirred vessel under reduced pressure. ISIJ Int. 1995;35:1348–1353.
   Web of Science ®Google Scholar
• Umezawa K, Matsunaga H, Arima R, et al. The influence of operating condition on dephosphorization and desulphurization reactions of hot metal with lime-based flux. Trans Iron Steel Inst Jpn. 1983;69:1810–1817.
   Google Scholar
• Singh U, Anapagaddi R, Mangal S, et al. Multiphase modeling of bottom-stirred ladle for prediction of slag–steel interface and estimation of desulfurization behavior. Metall Mater Trans B. 2016;47:1804–1816.
   Web of Science ®Google Scholar
• Costa L, Tavares R. Multiphase mass transfer in iron and steel refining processes. Mass Transfer-Adv Process Modell. 2015: 149–156.
   Google Scholar
• Lou W, Zhu M. Numerical simulation of slag-metal reactions and desulfurization efficiency in gas-stirred ladles with different thermodynamics and kinetics. ISIJ Int. 2015;55:961–969.
   Web of Science ®Google Scholar
• Cao Q, Pitts A, Nastac L. Numerical modelling of fluid flow and desulphurisation kinetics in an argon-stirred ladle furnace. Ironmak Steelmak. 2018;45:280–287.
   Web of Science ®Google Scholar
• Lamont J, Scott D. An eddy cell model of mass transfer into the surface of a turbulent liquid. AIChE J. 1970;16:513–519.
   Web of Science ®Google Scholar
• Cao Q, Nastac L. Mathematical investigation of fluid flow, mass transfer, and slag-steel interfacial behavior in gas-stirred ladles. Metall Mater Trans B. 2018;49:1388–1404.
   Web of Science ®Google Scholar
• Hoang Q, Ramírez-Argáez M, Conejo A, et al. Numerical modeling of liquid–liquid mass transfer and the influence of mixing in gas-stirred ladles. JOM. 2018;70:2109–2118.
   Web of Science ®Google Scholar
• Mietz J, Schneider S, Oeters F. Emulsification and mass transfer in ladle metallurgy. Steel Res. 1991;62:10–15.
   Google Scholar
• Singh V, Lenka S, Ajmani S, et al. A novel bottom stirring scheme to improve BOF performance through mixing and mass transfer modelling. ISIJ Int. 2009;49:1889–1894.
   Web of Science ®Google Scholar
• Ajmani S, Chatterjee A. Cold model study of mixing and mass transfer in LD converters at tata steel. Ironmak Steelmak. 1996;23:335–345.
   Web of Science ®Google Scholar
• Subramanian K, Richardson F. Mass transfer across interfaces agitated by large bubbles. J Iron Steel Inst. 1968;206:576–583.
   Web of Science ®Google Scholar
• Fruehan R, Martonik L. Physical behavior and liquid-phase mass transfer of submerged gas jets in liquids. 3rd Int Iron Steel Congr. 1978: 229–238.
   Google Scholar
• Ramírez-Argáez M, González-Rivera C. Modeling of metal-slag mass and momentum exchanges in gas-stirred ladles. 3rd Pan Am Mater Congr. 2017: 771–781.
   Google Scholar
• Ansys Inc. (2017). ANSYS Fluent theory guide 18.0. Ansys Inc.
   Google Scholar
• Ansys Inc. (2017). ANSYS Fluent user’s guide 18.0. Ansys Inc.
   Google Scholar
• Yu Y. FLUENT introductory and advanced tutorials. Beijing Inst Technol Press. 2008:154-184.
   Google Scholar
• Morsi S, Alexander A. An investigation of particle trajectories in two-phase flow systems. J Fluid Mech. 1972;55:193–208.
   Web of Science ®Google Scholar
• Fortescue G, Pearson J. On gas absorption into a turbulent liquid. Chem Eng Sci. 1967;22:1163–1176.
   Web of Science ®Google Scholar
• Taniguchi S, Kawaguchi S, Kikuchi A. Fluid flow and gas–liquid mass transfer in gas-injected vessels. Appl Math Modell. 2002;26:249–262.
   Web of Science ®Google Scholar
• Mazumdar D. Dynamic similarity considerations in gas-stirred ladle systems. Metall Trans B. 1990;21:925–928.
   Google Scholar
• Wei T, Oeters F. A model test for emulsion in gas–stirred ladles. Steel Res. 1992;63:60–68.
   Google Scholar