Study on the effect of mould alternate stirring on the internal quality of the round billet

References

• Gao X, Zhang D, Lu Y, et al. CO2 corrosion behavior of high-strength and toughness V140 steel for oil country tubular goods. J Mater Eng Perform. 2020;29 (12):8451–8460.
   Web of Science ®Google Scholar
• Luo M, Liu M, Wang XT, et al. Effect of tempering temperature at high temperature zone on sulfide stress cracking behavior for casting steel. Eng Fail Anal. 2019;105:227–236.
   Web of Science ®Google Scholar
• Putilova EA, Zadvorkin SM, Veselov IN, et al. A study of the structure and physicomechanical properties of promising high-strength economically alloyed steel for Oil and Gas production pipes operating under extreme conditions. Phys Met Metall. 2021;122 (9):923–930.
   Web of Science ®Google Scholar
• Feng Y, Ji L, Chen H, et al. Research progress and prospect of key technologies for high-strain line pipe steel and pipes. Nat Gas Ind B. 2021;8(2):146–153.
   Google Scholar
• Hafez KM. The role of a plain dent on the failure mode of a crude oil pipeline. Eng Fail Anal. 2021;122:105291.
   Web of Science ®Google Scholar
• Feng Y, Yang F, Zhang L, et al. A novel ACFM probe for oil and gas pipe in-line inspection. Energy Rep. 2021;7:1594–1600.
   Web of Science ®Google Scholar
• Askari M, Aliofkhazraei M, Aforukhteh S. A comprehensive review on internal corrosion and cracking of oil and gas pipelines. J Nat Gas Sci Eng. 2019;71:102971.
   Web of Science ®Google Scholar
• Guo F, Wang X, Wang J, et al. The significance of central segregation of continuously cast billet on banded microstructure and mechanical properties of section steel. Metals (Basel). 2020;10(1):76.
   Web of Science ®Google Scholar
• Zhan N, Hu Z, Zhang X. Experimental investigation of fatigue crack growth behavior in banded structure of pipeline steel. Metals (Basel). 2020;10(9):1193.
   Web of Science ®Google Scholar
• Wang Y, Chen Y, Yu W. Effect of Cr/Mn segregation on pearlite-martensite banded structure of high carbon bearing steel. Int J Miner Metall Mater. 2021;28(4):665–675.
   Web of Science ®Google Scholar
• Li X, Wang X, Bao Y, et al. Effect of electromagnetic stirring on the solidification behavior of high-magnetic-induction grain-oriented silicon steel continuous casting slab. JOM. 2020;72 (10):3628–3633.
   Web of Science ®Google Scholar
• Ji Y, Lan P, Geng H, et al. Behavior of spot segregation in continuously cast blooms and the resulting segregated band in oil pipe steels. Steel Res Int. 2018;89(3):1700331.
   Web of Science ®Google Scholar
• Wang P, Tie Z, Li S, et al. Effect of M-EMS current intensity on the subsurface segregation and internal solidification structure for bloom casting of 42CrMo steel. Ironmak Steelmak. 2021;48(7):779–787.
   Web of Science ®Google Scholar
• Pondaven C, Langlois L, Erzar B, et al. Numerical and experimental simulation of shrinkage porosity closure during hot rolling of bars. ESAFORM. 2021;1896:1–10.
   Google Scholar
• Gong Z, Liang J, Tian Q. Causes analysis of typical interior folding defect of seamless steel tube. Steel Rolling. 2014;31(6):31–33.
   Google Scholar
• Zhang H, Chen H, Lu L, et al. C.C. steel billet quality vs steel tube internal folding defect. Steel Pipe. 2006;35(6):27–30.
   Google Scholar
• Wu H, Wei N, Bao Y, et al. Effect of M-EMS on the solidification structure of a steel billet. Int J Miner Metall Mater. 2011;18(2):159–164.
   Google Scholar
• Jiang D, Wang R, Zhu L, et al. Thermal and numerical simulation of mould electromagnetic stirring of GCr15 bearing steel. Mater Sci Technol. 2019;23(18):2173–2180.
   Web of Science ®Google Scholar
• Wang Y, Zhang L, Yang W, et al. Effect of mold electromagnetic stirring and final electromagnetic stirring on the solidification structure and macrosegregation in bloom continuous casting. Steel Res Int. 2021;92(5):2000661.
   Web of Science ®Google Scholar
• Huo Y, Zhao L, An H, et al. Model prediction of the effect of in-mold electromagnetic stirring on negative segregation under bloom surface. Int J Miner, Metall Mater. 2020;27(3):319–327.
   Web of Science ®Google Scholar
• Yin Y, Zhang J, Wang B, et al. Effect of in-mould electromagnetic stirring on the flow, initial solidification and level fluctuation in a slab mould: a numerical simulation study. Ironmak Steelmak. 2019;46(7):682–691.
   Web of Science ®Google Scholar
• Ren B-Z, Chen D-F, Wang H-D, et al. Numerical simulation of fluid flow and solidification in bloom continuous casting mould with electromagnetic stirring. Ironmak Steelmak. 2015;42(6):401–408.
   Web of Science ®Google Scholar
• An H, Bao Y, Wang M, et al. Numerical analysis of coupled turbulent flow and macroscopic solidification in a billet continuous casting mould with electromagnetic stirring. Miner, Met Mater, Ser. 2017;53:551–567.
   Google Scholar
• Gupta VK, Jha PK, Jain PK. Numerical investigation into flow and solidification behavior of billet continuous casting with and without mold electromagnetic stirring. Heat Transfer. 2021;51(1):909–928.
   Web of Science ®Google Scholar
• Xue F, Luo Z, Yu W, et al. Study on banded structure in low carbon vessel plate for nuclear power plant. Appl Mech Mater. 2011;44–47(1–4):1763–1766.
   Google Scholar
• Hwang B, Lee HS, Kim YG, et al. Analysis and prevention of side cracking phenomenon occurring during hot rolling of thick low-carbon steel plates. Mater Sci Eng A. 2005;402(1–2):177–187.
   Web of Science ®Google Scholar