References
- Xu MS, Shi JL. Fracture analysis of nodular cast iron crankshaft. Metalurgija. 2020;59(4):517–520.
- Castro-Roman MJ, Lacaze J, Regordosa A, et al. Revisiting thermal analysis of hypereutectic spheroidal graphite cast irons. Metall Mater Trans A. 2020;51(12):6373–6386.
- Saito R, Maruyama T, Nakamura T, et al. Influence of tellurium addition to spheroidal graphite cast iron on the number of graphite particles. Int J Metalcast. 2019;13(3):571–577.
- Liao ZJ, Zhu FS, Yang Q, et al. Development and application of new type wire feeding spheroidal station. Zhuzao/Foundry. 2019;68(11):1269–1272.
- Ying AW, Yang JZ, Yin XZ. Design of continuous automatic wire-feeding device based on electric explosive wire. J Phys Conf Ser. 2019;1187(2):022067.
- Sahiluoma P, Yagodzinskyy YN, Forsstrom A, et al. Hydrogen embrittlement of nodular cast iron. Mater Corros. 2020;72(1–2):245–254.
- Wang CD, Sun YX, Li M, et al. An review of common nodulizing treatment processes. Modern Cast Iron. 2004;24(3):62–64.
- Zhang J, Xie GQ, Quan GY, et al. Application of wire feeding spheroidization technology to ductile iron production line. Foundry. 2019;68(2):128–131.
- Sanyal S, Saha JK, Chandra S. A mathematical model to optimize aluminum wire injection in steel melts. Steel Res Int. 2009;80(8):559–567.
- Sanyal S, Chandra S, Singh A, et al. Modelling cored wire injection in steel melts. Trans Indian Inst Met. 2004;57(2):157–169.
- Tkachenko SI, Gasilov VA, Ol khovskaya OG. Numerical simulation of an electrical explosion of thin aluminum wires. Math Models Comput Simul. 2011;3(5):575–586.
- Matochkin VA. Improving the ladle treatment of cord steel. Steel Transl. 2007;37(5):445–447.
- Krasnikov SK. Modeling dynamics of cored wire in molten steel using linear graph representation. Mech Mach Sci. 2022;107:71–84.
- Webber DS. Alloy dissolution in argon stirred steel. Missouri University of Science and Technology; 2011.
- Basak S, Dhal RK, Roy GG. Efficacy and recovery of calcium during CaSi cored wire injection in steel melts. Ironmaking Steelmaking. 2010;37(3):161–168.
- Kumar B, Mishra S, Rao MBV, et al. Experimental investigation of recovery and efficiency of calcium addition through cored wire in steel melt at Visakhapatnam steel plant. Ironmaking Steelmaking. 2017;46(5):454–462.
- Du Terrail Y, Fautrelle Y, Rebiere M, et al. Predictions of melting and dissolution times with a 1D heat transfer simulation package. WIT Trans Eng Sci. 1994;5:209–216.
- Sanyal S, Chandra S, Kumar S. An improved model of cored wire injection in steel melts. ISIJ Int. 2004;44(7):1157–1166.
- Castro-Cedeno E-I, Jardy A, Carre A, et al. Thermal modeling of the injection of standard and thermally insulated cored wire. Metall Mater Trans B. 2017;48B:3316–3328.
- Huang HG, Yan M, Sun JN, et al. Heat transfer of calcium cored wires and CFD simulation on flow and mixing efficiency in the argon-stirred ladle. Ironmaking Steelmaking. 2017;45(7):626–634.
- Xiao ZQ, Zhu MY. Application of numerical simulation for analysis of metallurgical processes. Beijing: Metallurgical Industry Press; 1994.
- Chang S, Shangguan D, Stefanescu DM. Modeling of the liquid/solid and the eutectoid phase transformations in spheroidal graphite cast iron. Metall Mater Trans A. 1992;23(4):1333–1346.
- Poirier D, Salcudean M. On numerical methods used in mathematical modeling of phase change in liquid metals. J Heat Transfer. 1988;110(3):562–570.
- Shao P, Zhang TA, Liu Y, et al. Numerical simulation on fluid flow in hot metal pretreatment. J Iron Steel Res. 2011;18(S2):129–134.
- Chang GW, Wang HX, Yue XD, et al. Research of the feeding speed adopting cored-wire method to spheroidize ductile iron melt. Acta Metall Sinica. 2008;21(5):362–368.
- Hatic V, Mavric B, Kosnik N, et al. Simulation of direct chill casting under the influence of a low-frequency electromagnetic field. Appl Math Model. 2018;54:170–188.
- Cabrales RC, Moraga NO. Mathematical modeling of macrosegregation during solidification of binary alloy by control volume finite element method. Appl Math Model. 2017;52:288–305.
- Gale WF, Totemeir TC. Smithells metals reference book. 8th ed. Oxford: Elsevier Butterworth-Heinemann; 2004.
- Guzik E, Wierzchowski D. Using cored wire injection method in the production of austenitic high Ni-alloyed ductile iron castings. Arch Metall Mater. 2013;58(3):969–972.