Optimization of VD/VOD multi-stage serial steam ejectors based on CFD

References

• Knight J. The use of steam ejectors for the vacuum degassing of steel. ProcInst Mech Eng. 1966;181(1):225–241.
   Google Scholar
• Keenan J, Neumann E. A simple air ejector. J Appl Mech. 1942;64:85–91.
   Google Scholar
• McGovern RK, Bulusu KV, Antar MA, et al. One-dimensional model of an optimal ejector and parametric study of ejector efficiency; 2012.
   Google Scholar
• Chunnanond K, Aphornratana S. An experimental investigation of a steam ejector refrigerator: the analysis of the pressure profile along the ejector. Appl Therm Eng. 2004;24(2-3):311–322.
   Web of Science ®Google Scholar
• Shahzamanian B, Varga S, Soares J, et al. Performance evaluation of a variable geometry ejector applied in a multi-effect thermal vapor compression desalination system. Appl Therm Eng. 2021;195:117177.
   Web of Science ®Google Scholar
• Sun W, Liu C, Zhang H, et al. Numerical analysis of two-stage vacuum ejector performance considering the influence of phase transition and non-condensable gases. Appl Therm Eng. 2022;213:118730.
   Web of Science ®Google Scholar
• Sharifi N. Numerical study of non-equilibrium condensing supersonic steam flow in a jet-pump based on supersaturation theory. Int J Mech Sci. 2020;165:105221.
   Web of Science ®Google Scholar
• Li H, Wang X, Huang H, et al. A numerical analysis of the influence of nozzle geometric structure on spontaneous steam condensation and irreversibility in the steam ejector nozzle. Appl Sci. 2021;11(24):11954.
   Google Scholar
• Eames I, Aphornratana S, Haider H. A theoretical and experimental study of a small-scale steam jet refrigerator. Int J Refrig. 1995;18(6):378–386.
   Web of Science ®Google Scholar
• Ruangtrakoon N, Thongtip T, Aphornratana S, et al. CFD simulation on the effect of primary nozzle geometries for a steam ejector in refrigeration cycle. Int J Therm Sci. 2013;63:133–145.
   Web of Science ®Google Scholar
• Hu L, Zhou C, Chen H. 3D numerical simulation research on the influence of nozzle and mixing chamber structure on steam ejector performance. MEMAT 2022; 2nd International Conference on Mechanical Engineering, Intelligent Manufacturing and Automation Technology. VDE; 2022.
   Google Scholar
• Sriveerakul T, Aphornratana S, Chunnanond K. Performance prediction of steam ejector using computational fluid dynamics: part 2. flow structure of a steam ejector influenced by operating pressures and geometries. Int J Therm Sci. 2007;46(8):823–833.
   Web of Science ®Google Scholar
• Huang B-J, Chang J. Empirical correlation for ejector design. Int J Refrig. 1999;22(5):379–388.
   Web of Science ®Google Scholar
• Mohammadi A, Aghaie HR, Saghafian M. Design and analysis of a suction mechanism for the vacuum degassing process. Ironmak Steelmak. 2021;48(4):457–465.
   Web of Science ®Google Scholar
• Weiss A, Grzona A, Olivier H. Behavior of shock trains in a diverging duct. Exp Fluids. 2010;49(2):355–365.
   Web of Science ®Google Scholar
• Cizungu K, Mani A, Groll M. Performance comparison of vapour jet refrigeration system with environment friendly working fluids. Appl Therm Eng. 2001;21(5):585–598.
   Web of Science ®Google Scholar
• Yang X, Long X, Yao X. Numerical investigation on the mixing process in a steam ejector with different nozzle structures. Int J Therm Sci. 2012;56:95–106.
   Web of Science ®Google Scholar
• Shourehdeli SA, Mobini K, Asakereh A. Numerical investigation of the effects of primary nozzle diverging portion on performance of the supersonic ejector of an ejector refrigeration cycle. Int J Air-Cond Refrig. 2019;27(03):1950030.
   Google Scholar
• Zhu Y, Cai W, Wen C, et al. Numerical investigation of geometry parameters for design of high performance ejectors. Appl Therm Eng. 2009;29(5-6):898–905.
   Web of Science ®Google Scholar
• Pianthong K, Seehanam W, Behnia M, et al. Investigation and improvement of ejector refrigeration system using computational fluid dynamics technique. Energy Convers Manage. 2007;48(9):2556–2564.
   Web of Science ®Google Scholar
• Metin C, Gök O, Atmaca AU, et al. Numerical investigation of the flow structures inside mixing section of the ejector. Energy. 2019;166:1216–1228.
   Web of Science ®Google Scholar
• Moharreri M, Ajam H. Numerical study of effects of simultaneous changes of geometric parameters on the performance of touss power plant ejector and selecting optimal conditions using Taguchi method. Modares Mech Eng. 2019;19(3):621–629.
   Google Scholar
• Hou Y, Chen F, Zhang S, et al. Numerical simulation study on the influence of primary nozzle deviation on the steam ejector performance. Int J Therm Sci. 2022;179:107633.
   Web of Science ®Google Scholar
• Mohammadi A. An investigation of geometrical factors of multi-stage steam ejectors for air suction. Energy. 2019;186:115808.
   Web of Science ®Google Scholar
• Shafaee M, Tavakol M, Riazi R, et al. An investigation on the supersonic ejectors working with mixture of air and steam. J Mech Sci Technol. 2015;29(11):4691–4699.
   Web of Science ®Google Scholar
• Ashrae G, Book D. Steam jet refrigeration equipment. Atlanta (GA): American Society of Heating, Refrigerating and Air Conditioning Engineers; 1983. p. 13.1–13.6.
   Google Scholar
• Wilcox DC. Turbulence modeling for CFD. Vol. 2. California: DCW industries La Canada; 1998.
   Google Scholar
• Chunnanond K, Aphornratana S. Ejectors: applications in refrigeration technology. Renew Sustain Energy Rev. 2004;8(2):129–155.
   Web of Science ®Google Scholar
• Goharimanesh M, Javid SM, Bazaz SR, et al. Reducing ice accretion using design of experiments based on Taguchi method. J Appl Sci Eng. 2017;20(2):165–172.
   Google Scholar
• Goharimanesh M, Akbari A, Akbarzadeh Tootoonchi A. More efficiency in fuel consumption using gearbox optimization based on Taguchi method. J Ind Eng Int. 2014;10(2):1–8.
   Google Scholar
• Thongtip T, Aphornratana S. An experimental analysis of the impact of primary nozzle geometries on the ejector performance used in R141b ejector refrigerator. Appl Therm Eng. 2017;110:89–101.
   Web of Science ®Google Scholar
• Sriveerakul T, Aphornratana S, Chunnanond K. Performance prediction of steam ejector using computational fluid dynamics: Part 1. Validation of the CFD results. Int J Therm Sci. 2007;46(8):812–822.
   Web of Science ®Google Scholar
• Gagan J, Smierciew K, Butrymowicz D, et al. Comparative study of turbulence models in application to gas ejectors. Int J Therm Sci. 2014;78:9–15.
   Web of Science ®Google Scholar
• Kitrattana B, Aphornratana S, Thongtip T. One dimensional steam ejector model based on real fluid property. Therm Sci Eng Progress. 2021;25:101016.
   Google Scholar