References
- Xu LJ, Wei SZ, Xiao FN, et al. Effects of carbides on abrasive wear properties and failure behaviours of high speed steels with different alloy element content. Wear. 2017;376-377:968–974.
- Luo Y, Guo H, Guo J. Effect of cooling rate on the transformation characteristics and precipitation behaviour of carbides in AISI M42 high-speed steel. Ironmak Steelmak. 2018;46(7):698–704.
- Zhang GQ, Yuan H, Jiao DL, et al. Microstructure evolution and mechanical properties of T15 high speed steel prepared by twin-atomiser spray forming and thermo-mechanical processing. Mater Sci Eng, A. 2012;558:566–571.
- Zhang Y, Zhang GQ, Li Z, et al. Study on the properties of spray formed tool-die steel. Mater Sci Forum. 2013;747-748:709–714.
- Beer O. Experiences in heat treatment of heat resistant carburizing bearing steels. HTM J Heat Treatment Mater. 2018;73(1):27–40.
- Cao Y, Jiang Z, Dong Y, et al. Research on the bonding interface of high speed steel/ductile cast iron composite roll manufactured by an improved electroslag cladding method. Metals. 2018;8(6):390–404.
- Kamimiyada K, Konno Y, Yanagitsuru A. Effect of heating conditions before quenching on residual stress in high-speed steel type cast iron rolls by centrifugal cast. Mater Trans. 2020;61(10):1987–1993.
- Mesquita RA, Barbosa CA. Spray forming high speed steel-properties and processing. Mater Sci Eng A. 2004;383(1):87–95.
- Kar PK, Upadhyaya GS. Liquid phase sintering and heat treatment of T15 grade PM high speed steel. Met Powder Rep. 1990;45(12):841–843.
- Che B, Lu L, Kang W, et al. Hot deformation behavior and processing map of a new type Mg-6Zn-1Gd-1Er alloy. J Alloys Compd. 2021;862:158700–158716.
- Bao W, Bao L, Liu D, et al. Constitutive equations, processing maps, and microstructures of Pb-Mg-Al-B-0.4Y alloy under hot compression. J Mater Eng Perform. 2020;29(1):607–619.
- Wu R, Liu Y, Geng C, et al. Study on hot deformation behavior and intrinsic workability of 6063 aluminum alloys using 3D processing map. J Alloys Compd. 2017;713:212–221.
- Duan Y, Ma L, Qi H, et al. Developed constitutive models, processing maps and microstructural evolution of Pb-Mg-10Al-0.5B alloy. Mater Charact. 2017;129:353–366.
- Tang L, Jiang F, Teng J, et al. Strain path dependent evolutions of microstructure and texture in AZ80 magnesium alloy during hot deformation. J Alloys Compd. 2019;806:292–301.
- Xu J, Gao X, Jiang Z, et al. A comparison of hot deformation behavior of high-Cr white cast iron and high-Cr white cast iron/low carbon steel laminate. Steel Res Int. 2016;87(6):780–788.
- Rajesh KVD, Buddi T. Finite element analysis of chromium and nickel alloyed steel billets forged under warm forming process using Deform–3D. Adv Mater Process Technol. 2021;9(1):1–9.
- Lee SI, Yoon J, Lee J. Mg scroll forging with AZ80 under warm forming condition. Int J Prec Eng Manuf. 2014;15(7):1473–1477.
- Ruan JH, Zhang LW, Gu SD, et al. 3D FE modelling of plate shape during heavy plate rolling. Ironmak Steelmak. 2014;41(3):199–205.
- Yan N, Di HS, Huang HQ, et al. Hot deformation behavior and processing maps of a medium manganese TRIP steel. Acta Metall Sin-Engl. 2018;32(8):1021–1031.
- Wang Z, Liu X, Xie F, et al. Dynamic recrystallization behavior and critical strain of 51CrV4 high-strength spring steel during hot deformation. Jom. 2018;70(10):2385–2391.
- Chen F, Cui Z, Chen S. Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: dynamic recrystallization. Mater Sci Eng A. 2011;528(15):5073–5080.
- Zhou X, Wang MJ, Fu YF, et al. Effect of borides on hot deformation behavior and microstructure evolution of powder metallurgy high borated stainless steel. Mater Charact. 2017;124:182–191.
- Liu Y, Yao Z, Ning Y, et al. Effect of deformation temperature and strain rate on dynamic recrystallized grain size of a powder metallurgical nickel-based superalloy. J Alloys Compd. 2017;691:554–563.
- Sellars CM, Mctegart WJ. On the mechanism of hot deformation. Acta Metall. 1966;14(9):1136–1138.
- Ardakani MK, Morakabati M, Momeni A. Dynamic recrystallisation and constitutive equation in hot deformed AISI H10 tool steel. Ironmak Steelmak. 2022;49(3):322–334.
- Jang MH, Kang JY, Jang JH, et al. Hot deformation behavior and microstructural evolution of alumina-forming austenitic heat-resistant steels during hot compression. Mater Charact. 2017;123:207–217.
- Feng H, Jiang ZH, Li HB, et al. Hot deformation behavior and microstructural evolution of high nitrogen martensitic stainless steel 30Cr15Mo1N. Steel Res Int. 2017;88(12):1700149.
- He A, Chen L, Hu S, et al. Constitutive analysis to predict high temperature flow stress in 20CrMo continuous casting billet. Mater Des. 2013;46:54–60.
- Chen J, Liu Y, Liu C, et al. Study on microstructural evolution and constitutive modeling for hot deformation behavior of a low-carbon RAFM steel. J Mater Res. 2017;32(07):1376–1385.
- Dong YW, Tan YB, Ji LY, et al. Hot deformation behavior and processing maps of Zr92Ti8 alloy. J Mater Eng Perform. 2020;29(2):914–924.
- Lin YC, Chen XM, Wen DX, et al. A physically-based constitutive model for a typical nickel-based superalloy. Comput Mater Sci. 2014;83:282–289.
- Liang Z, Zhang Q, Niu L, et al. Hot deformation behavior and processing maps of as-cast hypoeutectic Al-Si-Mg alloy. J Mater Eng Perform. 2019;28(8):4871–4881.
- Huo Y, Lin J, Bai Q, et al. Prediction of microstructure and ductile damage of a high-speed railway axle steel during cross wedge rolling. J Mater Process Technol. 2017;239:359–369.
- Li ML, Gao WJ, Zhou YH. Hot deformation behavior of 60NiTi shape-memory alloy fabricated by hot isostatic pressing. Mater Res Express. 2022;9(1):016511.
- Shamsudin S, Zhong ZW, Rahim SNA, et al. The influence of temperature and preheating time in extrudate quality of solid-state recycled aluminum. Int J Adv Manuf Technol. 2016;90(9-12):2631–2643.