OPTIMIZATION OF INELASTIC CYLINDRICAL SHELLS

References

• Shield , R. T. ( 1960 ). On the optimum design of shells , J. Appl. Mech. , 27 ( 2 ), 316 – 322 .
   Google Scholar
• Chinquini , C. and Kouam , M. ( 1983 ). Optimal plastic design of stiffened shells , Int. J. Solids and Struct. , 19 ( 9 ), 773 – 783 .
   Web of Science ®Google Scholar
• Freiberger , W. ( 1956 ). Minimum weight design problem of cylindrical shells , J. Appl. Mech. , 23 ( 4 ), 576 – 580 .
   Google Scholar
• Reiss , R. and Megarefs , G. J. ( 1971 ). Minimal design of sandwich axisymmetric plates obeying Mises criterion , Int. J. Solids and Struct. , 7 ( 6 ), 603 – 623 .
   Google Scholar
• Lellep , J. , Lepik , Ü . ( 1984 ) Analytical methods in plastic structural design , Eng. Optima. , 7 ( 3 ), 209 – 239 .
   Web of Science ®Google Scholar
• Kruzelecki , J. and Zyczkowski , M. ( 1985 ). Optimal structural design of shells - a survey , SM Archives , 10 , 101 – 170 .
   Google Scholar
• Lellep , J. ( 1985 ). Parameirical optimization of plastic cylindrical shells accounting for geometrical non-linearity (in Russian) . Mekh. Tverd. Tela (Mechanics of Solids) , 1 , 138 – 146 .
   Google Scholar
• Lellep , J. ( 1985 ). Parametrical optimization of plastic cylindrical shells in the post-yield range , Int. J. Eng. Sci. , 23 ( 12 ), 1289 – 1303 .
   Web of Science ®Google Scholar
• Lellep , J. and Sawczuk , A. ( 1987 ). Optimal design of rigid-plastic cylindrical shells in the post-yield range , Int. J. Solids and Struct. , 23 ( 5 ), 651 – 664 .
   Web of Science ®Google Scholar
• Lellep , J. ( 1989 ). Optimal design of plastic reinforced cylindrical shells , Contr. Theory and Advanced Technol , 5 ( 2 ), 119 – 135 .
   Web of Science ®Google Scholar
• Lellep , J. and Hannus , S. ( 1992 ). Optimal locations of rigid stiffeners for a geometrically non-linear plastic cylindrical shells , Trans. Tartu Univ. , 939 , 70 – 78 .
   Google Scholar
• Lellep , J. and Hannus , S. ( 1993 ). Optimization of plastic cylindrical shells with stepwise varying thickness in the case of von Mises material . Struct. Optimiz , 10 ( 2 ), 122 – 127 .
   Web of Science ®Google Scholar
• Lellep , J. ( 1991 ). Optimization of plastic structures . Tartu University Press , Tartu .
   Google Scholar
• Lellep , J. and Majak , J. ( 1990 ). Optimal design of geometrically non-linear plastic cylindrical shells (in Russian) . Mekh. Tverd. Tela (Mechanics of Solids) 1 , 118 – 122 .
   Google Scholar
• Lellep , J. and Majak , J. ( 1992 ), Minimum weight design of plastic cylindrical shells accounting for large deflections , Tartu Ulik. Toim. (Trans. Tartu Univ.) 939 , 42 – 53 .
   Google Scholar
• Lepik , U. , ( 1982 ). Optimal design of inelastic structures under dynamic loading . Valgus , Tallinn ( in Russian ).
   Google Scholar
• Lellep , J. and Sakkov , E. ( 1996 ). Optimization of cylindrical shells of fiber-reinforced composite materials , Mech. Composite Mater. , 1 , 65 – 71 .
   Google Scholar
• Martin , J. B. and Symonds , P. S. ( 1966 ). Mode approximation for impulsively loaded rigid-plastic structures , Proc. ASCE , 92 ( 5 ), 43 – 66 .
   Google Scholar
• Hodge , P. G. ( 1963 ). Limit analysis of rotationally symmetric plates and shells , Prentice Hall , Englewood Cliffs .
   Google Scholar
• Robinson , M. ( 1971 ). A comparison of yield surfaces for thin shells , Int. J. Mech., Sci. , 13 ( 4 ), 345 – 354 .
   Web of Science ®Google Scholar
• Haydl , H. M. and Sherboume , A. N. ( 1979 ). Some approximations to the llyushin yield surface for circular plates and cylindrical shells , Z. angetv. Math, and Mech. , 59 ( 2 ), 131 – 132 .
   Web of Science ®Google Scholar
• Lance , R. H. and Robinson , D. N. ( 1971 ). A maximum shear stress theory of plastic failure to fiber-reinforced material , J. Mech. and Phys. Solids , 19 ( 2 ), 49 – 60 .
   Google Scholar
• Lance , R. H. and Robinson , D. N. ( 1972 ). Limit analysis of ductile fiber-reinforced structures , Proc. ASCE , 98 ( 1 ), 195 – 209 .
   Google Scholar