Aerothermal shape optimization for a double row of discrete film cooling holes on the suction surface of a turbine vane

References

• ANSYS. ANSYS CFX 12.0 User's Guide.
   Google Scholar
• Arabnia, M., and W. Ghaly. 2009. “A Strategy for Multi-Point Shape Optimization of Turbine Stages in Three-Dimensional Flow.” Proceedings of the ASME Turbo Expo.
   Google Scholar
• Bell, C. M., H. Hamakawa, and P. M. Ligrani. 2000. “Film Cooling From Shaped Holes.” Journal of Heat Transfer 122: 224–232. doi: 10.1115/1.521484
   Web of Science ®Google Scholar
• Bunker, R. S. 2005. “A Review of Shaped Hole Turbine Film Cooling Technology.” Journal of Heat Transfer 127: 441–453. doi: 10.1115/1.1860562
   Web of Science ®Google Scholar
• Chappell, J., P. Ligrani, S. Sreekanth, T. Lucas, and E. Vlasic. 2010. “Aerodynamic Performance of Suction-Side Gill Region Film Cooling.” Journal of Turbomachinery 132: 031020-1–11.
   Google Scholar
• Choi, J., S. Teng, J.-C. Han, and F. Ladeinde. 2004. “Effect of Free-Stream Turbulence on Turbine Blade Heat Transfer and Pressure Coefficients in Low Reynolds Number Flows.” International Journal of Heat and Mass Transfer 47: 3441–3452. doi: 10.1016/j.ijheatmasstransfer.2004.01.015
   Web of Science ®Google Scholar
• Colban, W. F., K. A. Thole, and D. Bogard. 2011. “A Film Cooling Correlation for Shaped Holes on a Flat-Plate Surface.” Journal of Turbomachinery 133: 1–11. doi: 10.1115/1.4002064
   Web of Science ®Google Scholar
• Deb, K. 2001. Multi-Objective Optimization using Evolutionary Algorithms. John Wiley and Sons.
   Google Scholar
• Dennis, B. H., G. S. Dulikravich, and Z.-X. Han. 1999. “Constrained Shape Optimization of Airfoil Cascades using a Navier–Stokes Solver and a Genetic/SQP Algorithm.” Proceedings of the ASME Turbo Expo 1999: Turbine Technical Conference and Exposition, 7–10 June 1999, Indianapolis, IN, ASME Paper 99-GT-441.
   Google Scholar
• El Ayoubi, C., W. Ghaly, and I. Hassan. 2012. “Optimization of Film Cooling Holes on the Suction Surface of a High Pressure Turbine Blade.” Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, Article GT2012-69773.
   Google Scholar
• El Ayoubi, C., O. Hassan, W. Ghaly, and I. Hassan. 2013. “Aero-Thermal Optimization and Experimental Verification for the Discrete Film Cooling of a Turbine Airfoil.” Proceedings of the ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, Article GT2013-95325.
   Google Scholar
• Ethridge, M. I., J. M. Cutbirth, and D. G. Bogard. 2001. “Scaling of Performance for Varying Density Ratio Coolants on an Airfoil with Strong Curvature and Pressure Gradient Effects.” Journal of Turbomachinery 123: 231–237. doi: 10.1115/1.1343457
   Web of Science ®Google Scholar
• Gritsch, M., W. Colban, H. Schar, and K. Dobbeling. 2005. “Effect of Hole Geometry on the Thermal Performance of Fan-Shaped Film Cooling Holes.” Journal of Turbomachinery 127: 718–725. doi: 10.1115/1.2019315
   Web of Science ®Google Scholar
• Gritsch, M., A. Schulz, and S. Wittig. 2000. “Film Cooling Holes with Expanded Exits: Near Hole Heat Transfer Coefficients.” International Journal of Heat Fluid Flow 21: 146–155. doi: 10.1016/S0142-727X(99)00076-4
   Web of Science ®Google Scholar
• Hartsel, J. E. 1972. Prediction of Effects of Mass-Transfer Cooling on The Blade-Row Efficiency of Turbine Airfoils 72–11.
   Google Scholar
• Jackson, D. J., K. L. Lee, P. M. Ligrani, and P. D. Johnson. 2000. “Transonic Aerodynamic Losses Due to Turbine Airfoil Suction Surface Film Cooling.” Journal of Turbomachinery 122: 317–327. doi: 10.1115/1.555455
   Web of Science ®Google Scholar
• Jung, I. S., and J. S. Lee. 2000. “Effects of Orientation Angles on Film Cooling Over a Flat Plate: Boundary Layer Temperature Distributions and Adiabatic Film Cooling Effectiveness.” Journal of Turbomachinery 122: 153–160. doi: 10.1115/1.555437
   Web of Science ®Google Scholar
• Lai, Y., and X. Yuan. 2002. “Blade Design with Three-Dimensional Viscous Analysis and Hybrid Optimization.” Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization.
   Google Scholar
• Lee, K.-D., and K.-Y. Kim. 2010. “Shape Optimization of a Fan-Shaped Hole to Enhance Film-Cooling Effectiveness.” International Journal of Heat and Mass Transfer 53: 2996–3005. doi: 10.1016/j.ijheatmasstransfer.2010.03.032
   Web of Science ®Google Scholar
• Lee, K. D., S. M. Kim, and K. Y. Kim. 2011. “Multi-Objective Optimization of Film-Cooling Holes Considering Heat Transfer and Aerodynamic Loss.” Proceedings of ASME Turbo Expo 2011, Article GT2011-45402.
   Google Scholar
• Li, G. C., and W. Zhang. 2010. “Improving Film Cooling Performance by Using One-Inlet and Double-Outlet Hole.” Journal of Thermal Science and Engineering Application 19 (10): 430–437. doi: 10.1007/s11630-010-0405-x
   Google Scholar
• Mengistu, T., and W. Ghaly. 2004. Aerodynamic Design of Gas Turbine Cascades Using Global Optimizers and Artificial Neural Networks, Part XVII: 669–674.
   Google Scholar
• Mengistu, T., and W. Ghaly. 2008a. “Aerodynamic Optimization of Turbomachinery Blades Using Evolutionary Methods and ANN-Based Surrogate Models.” Optimization and Engineering 9: 239–255. doi: 10.1007/s11081-007-9031-1
   Web of Science ®Google Scholar
• Mengistu, T., and W. Ghaly. 2008b. Gas Turbine Blade Design Using Multi-Objective Optimization and Dual Geometry Representation.
   Google Scholar
• Mhetras, S., J.-C. Han, and R. Rudolph. 2012. “Effect of Flow Parameter Variation on Full Coverage Film Cooling Effectiveness for a Gas Turbine Blade.” Journal of Turbomachinery 134: 0110004-1–10. doi: 10.1115/1.4003228
   Google Scholar
• Nguyen, C. Q., P. L. Johnson, B. C. Bernier, S. H. Ho, and J. S. Kapat. 2011. “Comparison of Film Effectiveness and Cooling Uniformity of Conical and Cylindrical-Shaped Film Hole with Coolant-Exit Temperature Correction.” Journal of Thermal Science and Engineering Applications 3: 031011-1–9. doi: 10.1115/1.4003886
   Google Scholar
• Oyama, A., M.-S. Liou, and S. Obyashi. 2004. “Transonic Axial-Flow Blade Shape Optimization: Evolutionary Algorithms/Three-Dimensional Navier–Stokes Solver.” Journal of Propulsion and Power 20: 612–619. doi: 10.2514/1.2290
   Web of Science ®Google Scholar
• Schalkoff, R. (ed.). 1997. Artificial Neural Networks. New York: McGraw-Hill.
   Google Scholar
• Walter, D. K., and J. H. Leylek. 2000. “Impact of Film-Cooling Jets on Turbine Aerodynamic Losses.” Journal of Turbomachinery 122: 537–546. doi: 10.1115/1.1303818
   Web of Science ®Google Scholar
• Wang, X., and M. Damodaran. 2001. “Aerodynamic Shape Optimization Using Computational Fluid Dynamics and Parallel Simulated Annealing Algorithms.” AIAA Journal 39: 1500–1508. doi: 10.2514/2.1474
   Web of Science ®Google Scholar
• Yu, Y., C. H. Yen, T. I. P. Shih, and M. K. Chyu. 2002. “Film Cooling Effectiveness and Heat Transfer Coefficient Distributions Around Diffusion Shaped Holes.” Journal of Turbomachinery 124: 820–827.
   Web of Science ®Google Scholar
• Zhang, X. Z., and I. Hassan. 2006. “Film Cooling Effectiveness for an Advanced-Louver Cooling Scheme for Gas Turbines.” Journal of Thermophysics and Heat Transfer 20 (4): 754–763. doi: 10.2514/1.18898
   Web of Science ®Google Scholar