Conceptual design of efficient heat conductors using multi-material topology optimization

References

• Bejan, A. 1997. “Constructal-Theory Network of Conducting Paths for Cooling a Heat Generating Volume.” International Journal of Heat and Mass Transfer 40 (4): 799–811, 813–816. doi: 10.1016/0017-9310(96)00175-5
   Web of Science ®Google Scholar
• Bendsoe, M. P., and N. Kikuchi. 1988. “Generating Optimal Topologies in Structural Design Using a Homogenization Method.” Computer Methods in Applied Mechanics and Engineering 71 (2): 197–224. doi: 10.1016/0045-7825(88)90086-2
   Web of Science ®Google Scholar
• Bendsoe, M. P., and O. Sigmund. 1999. “Material Interpolation Schemes in Topology Optimization.” Archive of Applied Mechanics 69 (9-10): 635–654. doi: 10.1007/s004190050248
   Web of Science ®Google Scholar
• Bendsoe, M., and O. Sigmund. 2004. Topology Optimization Theory, Methods and Applications. 2nd ed. Berlin: Springer.
   Google Scholar
• Borrvall, T., and J. Petersson. 2003. “Topology Optimization of Fluids in Stokes Flow.” International Journal for Numerical Methods in Fluids 41 (1): 77–107. doi: 10.1002/fld.426
   Web of Science ®Google Scholar
• Bruns, T. E. 2007. “Topology Optimization of Convection-Dominated, Steady-State Heat Transfer Problems.” International Journal of Heat and Mass Transfer 50 (15-16): 2859–2873. doi: 10.1016/j.ijheatmasstransfer.2007.01.039
   Web of Science ®Google Scholar
• Burger, F. H., J. Dirker, and J. P. Meyer. 2013. “Three-Dimensional Conductive Heat Transfer Topology Optimisation in a Cubic Domain for the Volume-to-Surface Problem.” International Journal of Heat and Mass Transfer 67: 214–224. doi: 10.1016/j.ijheatmasstransfer.2013.08.015
   Web of Science ®Google Scholar
• Cai, K., Z. Gao, and J. Shi. 2014. “Topology Optimization of Continuum Structures with Bi-Modulus Materials.” Engineering Optimization 46 (2): 244–260. doi:10.1080/0305215X.2013.765001
   Web of Science ®Google Scholar
• Challis, V. J., and J. K. Guest. 2009. “Level Set Topology Optimization of Fluids in Stokes Flow.” International Journal for Numerical Methods in Engineering 79 (10): 1284–1308. doi: 10.1002/nme.2616
   Web of Science ®Google Scholar
• Chen, Y. M., and J. M. Ting. 2002. “Ultra High Thermal Conductivity Polymer Composites.” Carbon 40 (3): 359–362. doi: 10.1016/S0008-6223(01)00112-9
   Web of Science ®Google Scholar
• Cheng, C. H., and M. H. Chang. 2005. “Design of Irregular Slider Surface for Satisfying Specified Load Demands.” Journal of Mechanical Design 127 (6): 1184–1190. doi: 10.1115/1.2049069
   Web of Science ®Google Scholar
• Cheng, C. H., and Y. F. Chen. 2014. “Topology Optimization of Heat Conduction Paths by a Non-Constrained Volume-of-Solid Function Method.” International Journal of Thermal Sciences 78: 16–25. doi: 10.1016/j.ijthermalsci.2013.11.011
   Web of Science ®Google Scholar
• Dahl, J., J. S. Jensen, and O. Sigmund. 2008. “Topology Optimization for Transient Wave Propagation Problems in One Dimension—Design of Filters and Pulse Modulators.” Structural and Multidisciplinary Optimization 36 (6): 585–595. doi:10.1007/s00158-007-0192-5
   Web of Science ®Google Scholar
• Dbouk, T. 2017. “A Review about the Engineering Design of Optimal Heat Transfer Systems Using Topology Optimization.” Applied Thermal Engineering 112: 841–854. doi:10.1016/j.applthermaleng.2016.10.134
   Web of Science ®Google Scholar
• de Kruijf, N., S. Zhou, Q. Li, and Y. M. Mai. 2007. “Topological Design of Structures and Composite Materials with Multiobjectives.” International Journal of Solids and Structures 44 (22-23): 7092–7109. doi: 10.1016/j.ijsolstr.2007.03.028
   Web of Science ®Google Scholar
• Dede, E. M. 2010. “Simulation and Optimization of Heat Flow via Anisotropic Material Thermal Conductivity.” Computational Materials Science 50 (2): 510–515. doi: 10.1016/j.commatsci.2010.09.012
   Web of Science ®Google Scholar
• Dede, E. M., P. Schmalenberg, T. Nomura, and M. Ishigaki. 2015. “Design of Anisotropic Thermal Conductivity in Multilayer Printed Circuit Boards.” IEEE Transactions on Components, Packaging and Manufacturing Technology 5 (12): 1763–1774. doi: 10.1109/TCPMT.2015.2473103
   Web of Science ®Google Scholar
• Dede, E. M., P. Schmalenberg, C. M. Wang, F. Zhou, and T. Nomura. 2016. “Collection of Low-Grade Waste Heat for Enhanced Energy Harvesting.” AIP Advances 6 (5): Article ID 055113. doi: 10.1063/1.4950861
   Web of Science ®Google Scholar
• Dirker, J., and J. P. Meyer. 2013. “Topology Optimization for an Internal Heat-Conduction Cooling Scheme in a Square Domain for High Heat Flux Applications.” Journal of Heat Transfer 135 (11): 111010. doi: 10.1115/1.4024615
   Web of Science ®Google Scholar
• Friedrich, H., and S. Schumann. 2001. “Research for a ‘New Age of Magnesium’ in the Automotive Industry.” Journal of Materials Processing Technology 117 (3): 276–281. doi: 10.1016/S0924-0136(01)00780-4
   Web of Science ®Google Scholar
• Gao, T., and W. Zhang. 2011. “A Mass Constraint Formulation for Structural Topology Optimization with Multiphase Materials.” International Journal for Numerical Methods in Engineering 88 (8): 774–796. doi: 10.1002/nme.3197
   Web of Science ®Google Scholar
• Guest, J. K., and J. H. Prevost. 2006. “Topology Optimization of Creeping Fluid Flows Using a Darcy–Stokes Finite Element.” International Journal for Numerical Methods in Engineering 66 (3): 461–484. doi: 10.1002/nme.1560
   Web of Science ®Google Scholar
• Guest, J. K., J. H. Prevost, and T. Belytschko. 2004. “Achieving Minimum Length Scale in Topology Optimization Using Nodal Design Variables and Projection Functions.” International Journal for Numerical Methods in Engineering 61 (2): 238–254. doi: 10.1002/nme.1064
   Web of Science ®Google Scholar
• Guo, K., W. Qi, B. Liu, C. Liu, Z. Huang, and G. Zhu. 2016. “Optimization of an ‘Area to Point’ Heat Conduction Problem.” Applied Thermal Engineering 93: 61–71. doi:10.1016/j.applthermaleng.2015.09.061
   Web of Science ®Google Scholar
• Haertel, J. H. K., and G. F. Nellis. 2017. “A Fully Developed Flow Thermofluid Model for Topology Optimization of 3D-Printed Air-Cooled Heat Exchangers.” Applied Thermal Engineering 119: 10–24. doi:10.1016/j.applthermaleng.2017.03.030
   Web of Science ®Google Scholar
• He, D., H. P. Jia, and S. T. Liu. 2006. “Topology Optimization of Structures with High Efficiency of Heat Dissipation.” Proceedings of the 1st international conference on enhancement and promotion of Computational Methods in Engineering Science and Mechanics (CMESM), 718–721. http://cstm.cnki.net/stmt/TitleBrowse/KnowledgeNet/DLDG200608001130?db=STMI8515
   Google Scholar
• Hirsch, Jürgen. 2011. “Aluminium in Innovative Light-Weight Car Design.” Materials Transactions 52 (5): 818–824. doi:10.2320/matertrans.L-MZ201132
   Web of Science ®Google Scholar
• Hvejsel, C. F., and E. Lund. 2011. “Material Interpolation Schemes for Unified Topology and Multi-Material Optimization.” Structural and Multidisciplinary Optimization 43 (6): 811–825. doi: 10.1007/s00158-011-0625-z
   Web of Science ®Google Scholar
• Iga, A., S. Nishiwaki, K. Izui, and M. Yoshimura. 2009. “Topology Optimization for Thermal Conductors Considering Design-Dependent Effects, Including Heat Conduction and Convection.” International Journal of Heat and Mass Transfer 52 (11-12): 2721–2732. doi: 10.1016/j.ijheatmasstransfer.2008.12.013
   Web of Science ®Google Scholar
• Koga, A. A., E. C. C. Lopes, H. F. V. Nova, C. R. de Lima, and E. C. N. Silva. 2013. “Development of Heat Sink Device by Using Topology Optimization.” International Journal of Heat and Mass Transfer 64: 759–772. doi:10.1016/j.ijheatmasstransfer.2013.05.007
   Web of Science ®Google Scholar
• Lee, Jaewook, Ercan M. Dede, and Tsuyoshi Nomura. 2011. “Simultaneous Design Optimization of Permanent Magnet, Coils, and Ferromagnetic Material in Actuators.” IEEE Transactions on Magnetics 47 (12): 4712–4716. doi:10.1109/TMAG.2011.2160870
   Web of Science ®Google Scholar
• Lee, G. W., M. Park, J. Kim, J. I. Lee, and H. G. Yoon. 2006. “Enhanced Thermal Conductivity of Polymer Composites Filled with Hybrid Filler.” Composites Part A: Applied Science and Manufacturing 37 (5): 727–734. doi:10.1016/j.compositesa.2005.07.006
   Web of Science ®Google Scholar
• Li, Q., G. P. Steven, O. M. Querin, and Y. M. Xie. 1999. “Shape and Topology Design for Heat Conduction by Evolutionary Structural Optimization.” International Journal of Heat and Mass Transfer 42 (17): 3361–3371. doi: 10.1016/S0017-9310(99)00008-3
   Web of Science ®Google Scholar
• Li, Q., G. P. Steven, and Y. M. Xie. 2001. “Thermoelastic Topology Optimization for Problems with Varying Temperature Fields.” Journal of Thermal Stresses 24 (4): 347–366. doi: 10.1080/01495730151078153
   Web of Science ®Google Scholar
• Li, Q., G. P. Steven, Y. M. Xie, and O. M. Querin. 2004. “Evolutionary Topology Optimization for Temperature Reduction of Heat Conducting Fields.” International Journal of Heat and Mass Transfer 47 (23): 5071–5083. doi: 10.1016/j.ijheatmasstransfer.2004.06.010
   Web of Science ®Google Scholar
• Malecek, A. 2014. “Prototyping Success: Students Harness Startup Principles in Ambitious Design Project.” College of Engineering, University of Wisconsin-Madison. Accessed 17 April 2015. https://www.engr.wisc.edu/prototyping-success-students-harness-startup-principles-in-ambitious-design-project/.
   Google Scholar
• Nguyen, T. H., G. H. Paulino, J. Song, and C. H. Le. 2010. “A Computational Paradigm for Multiresolution Topology Optimization (MTOP).” Structural and Multidisciplinary Optimization 41 (4): 525–539. doi: 10.1007/s00158-009-0443-8
   Web of Science ®Google Scholar
• Nguyen, T. H., G. H. Paulino, J. H. Song, and C. H. Le. 2012. “Improving Multiresolution Topology Optimization via Multiple Discretizations.” International Journal for Numerical Methods in Engineering 92 (6): 507–530. doi: 10.1002/nme.4344
   Web of Science ®Google Scholar
• Park, J., and A. Sutradhar. 2015. “A Multi-Resolution Method for 3D Multi-Material Topology Optimization.” Computer Methods in Applied Mechanics and Engineering 285: 571–586. doi:10.1016/j.cma.2014.10.011
   Web of Science ®Google Scholar
• Park, J., A. Sutradhar, J. J. Shah, and G. H. Paulino. 2018. “Design of Complex Bone Internal Structure Using Topology Optimization with Perimeter Control.” Computers in Biology and Medicine 94: 74–84. doi:10.1016/j.compbiomed.2018.01.001
   PubMed Web of Science ®Google Scholar
• Picelli, R., R. van Dijk, W. M. Vincente, R. Pavanello, M. Langelaar, and F. van Keulen. 2017. “Topology Optimization for Submerged Buoyant Structures.” Engineering Optimization 49 (1): 1–21. doi: 10.1080/0305215X.2016.1164147
   Web of Science ®Google Scholar
• Rupp, C. J., A. Evgrafov, K. Maute, and M. L. Dunn. 2007. “Design of Phononic Materials/Structures for Surface Wave Devices Using Topology Optimization.” Structural and Multidisciplinary Optimization 34 (2): 111–121. doi: 10.1007/s00158-006-0076-0
   Web of Science ®Google Scholar
• Shotts, N. 2015. “Cadillac CT6 Stuns New York International Auto Show Audience.” General Motors. Accessed 5 April 2015. http://www.forestlakechevrolet.com/news/cadillac-ct6-stuns-new-york-international-auto-show-audience/
   Google Scholar
• Sigmund, O., and K. Maute. 2013. “Topology Optimization Approaches.” Structural and Multidisciplinary Optimization 48 (6): 1031–1055. doi: 10.1007/s00158-013-0978-6
   Web of Science ®Google Scholar
• Silva, E. C. N., and N. Kikuchi. 1999. “Design of Piezoelectric Transducers Using Topology Optimization.” Smart Materials & Structures 8 (3): 350–364. doi: 10.1088/0964-1726/8/3/307
   Web of Science ®Google Scholar
• Steven, G. P., Q. Li, and Y. M. Xie. 2000. “Evolutionary Topology and Shape Design for General Physical Field Problems.” Computational Mechanics 26 (2): 129–139. doi: 10.1007/s004660000160
   Web of Science ®Google Scholar
• Sutradhar, A., J. Park, D. Carrau, and M. J. Miller. 2014. “Experimental Validation of 3D Printed Patient-Specific Implants Using Digital Image Correlation and Finite Element Analysis.” Computers in Biology and Medicine 52: 8–17. doi:10.1016/j.compbiomed.2014.06.002
   PubMed Web of Science ®Google Scholar
• Sutradhar, A., J. Park, D. Carrau, T. H. Nguyen, M. J. Miller, and G. H. Paulino. 2016. “Designing Patient-Specific 3D Printed Craniofacial Implants Using a Novel Topology Optimization Method.” Medical & Biological Engineering & Computing 54 (7): 1123–1135. doi: 10.1007/s11517-015-1418-0
   PubMed Web of Science ®Google Scholar
• Sutradhar, A., and G. H. Paulino. 2004a. “A Simple Boundary Element Method for Problems of Potential in Non-Homogeneous Media.” International Journal for Numerical Methods in Engineering 60 (13): 2203–2230. doi:10.1002/nme.1046
   Web of Science ®Google Scholar
• Sutradhar, A., and G. H. Paulino. 2004b. “The Simple Boundary Element Method for Transient Heat Conduction in Functionally Graded Materials.” Computer Methods in Applied Mechanics and Engineering 193 (42-44): 4511–4539. doi: 10.1016/j.cma.2004.02.018
   Web of Science ®Google Scholar
• Tavakoli, R., and S. M. Mohseni. 2014. “Alternating Active-Phase Algorithm for Multimaterial Topology Optimization Problems: A 115-Line MATLAB Implementation.” Structural and Multidisciplinary Optimization 49 (4): 621–642. doi: 10.1007/s00158-013-0999-1
   Web of Science ®Google Scholar
• Torquato, S., S. Hyun, and A. Donev. 2002. “Multifunctional Composites: Optimizing Microstructures for Simultaneous Transport of Heat and Electricity.” Physical Review Letters 89 (26), Article ID 266601. doi:10.1103/PhysRevLett.89.266601
   Web of Science ®Google Scholar
• Torquato, S., S. Hyun, and A. Donev. 2003. “Optimal Design of Manufacturable Three-Dimensional Composites with Multifunctional Characteristics.” Journal of Applied Physics 94 (9): 5748–5755. doi: 10.1063/1.1611631
   Web of Science ®Google Scholar
• Wang, M. Y., and X. M. Wang. 2004. “‘Color’ Level Sets: A Multi-Phase Method for Structural Topology Optimization with Multiple Materials.” Computer Methods in Applied Mechanics and Engineering 193 (6-8): 469–496. doi: 10.1016/j.cma.2003.10.008
   Web of Science ®Google Scholar
• Yin, L. Z., and G. K. Ananthasuresh. 2002. “A Novel Topology Design Scheme for the Multi-Physics Problems of Electro-Thermally Actuated Compliant Micromechanisms.” Sensors and Actuators A—Physical 97-98: 599–609. doi:10.1016/S0924-4247(01)00853-6
   Web of Science ®Google Scholar
• Zhang, Y., and S. Liu. 2008. “Design of Conducting Paths Based on Topology Optimization.” Heat and Mass Transfer 44 (10): 1217–1227. doi: 10.1007/s00231-007-0365-1
   Web of Science ®Google Scholar
• Zhang, X. S., G. H. Paulino, and A. S. Ramos Jr. 2017. “Multi-Material Topology Optimization with Multiple Volume Constraints: A General Approach Applied to Ground Structures with Material Nonlinearity.” Structural and Multidisciplinary Optimization 57 (1): 161–182. doi: 10.1007/s00158-017-1768-3
   Web of Science ®Google Scholar
• Zhou, S. W., and Q. Li. 2008. “A Variational Level Set Method for the Topology Optimization of Steady-State Navier–Stokes Flow.” Journal of Computational Physics 227 (24): 10178–10195. doi: 10.1016/j.jcp.2008.08.022
   Web of Science ®Google Scholar
• Zhou, S. W., and M. Y. Wang. 2007. “Multimaterial Structural Topology Optimization with a Generalized Cahn–Hilliard Model of Multiphase Transition.” Structural and Multidisciplinary Optimization 33 (2): 89–111. doi: 10.1007/s00158-006-0035-9
   Web of Science ®Google Scholar