References
- International Organization for Standardization, ISO, Cleanrooms and associated controlled environments – Part 8: Classification of air cleanliness by chemical concentration (ACC), 14644–14648 (2013).
- O. Wilke, W. Horn, K. Wiegner, O. Jann, W. Bremser, D. Brödner, S. Kalus, R. Juritsch and C. Till, Research number ZP 52-5-20.49.1-1251/07, March 2009. http://www.bam.de/en/service/publikationen/publikationen_medien/abschlussbericht_engl_ils_dibt_2009.pdf.
- International Organization for Standardization, ISO, Space systems – Contamination and cleanliness control, 15388 (2012).
- C. Yrieix, A. Dulaurent, C. Laffargue, F. Maupetit, T. Pacary and E. Uhde, Chemosphere 79, 414 (2010). doi:10.1016/j.chemosphere.2010.01.062.
- M. Nohr, W. Horn, K. Wiegner, M. Richter and W. Lorenz, Chemosphere 107, 224 (2014). doi:10.1016/j.chemosphere.2013.12.047.
- S. Penkett, WMO TD report No. 1373, 2007.
- B. Rappengluck, E. Apel, M. Bauerfeind, J. Bottenheim, P. Brickell, P. Cavolka, J. Cech, L. Gatti, H. Hakola and J. Honzak, Atmos. Environ. 40, 7508 (2006). doi:10.1016/j.atmosenv.2006.07.016.
- European Metrology Research Programme, IND63 MetAMC research project 2013 – 2016. Issued November 2014. <https://www.ptb.de/emrp/ind63-project.html?&no_cache=1&cid=2641&did=9419&sechash=6b025d91>.
- European Metrology Research Programme, ENV56 KEY-VOCs research project 2014 – 2017. Issued February 2014. <https://www.euramet.org/fileadmin/docs/EMRP/JRP/JRP_Summaries_2013/Environment_JRPs/ENV56_Publishable_JRP_Summary.pdf>.
- G. Sassi, A. Demichelis and M. Sassi, Meas. Sci. Technol. 22, 105104 (2011). doi:10.1088/0957-0233/22/10/105104.
- International Organization for Standardization, ISO, Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 8: Diffusion method. 6145–6148 (2003).
- A. Demichelis, G. Sassi and M. Sassi, presented at the 6h Gas Analysis Symposium & Exhibition, Rotterdam, the Netherlands, 2011. <http://www.gas2011.org/publicaties/4900>.
- P.J. Brewer, B.A. Goody, T. Gillam, R.J.C. Brown and M.J.T. Milton, Meas. Sci. Technol. 21, 115902 (2010). doi:10.1088/0957-0233/21/11/115902.
- A. Demichelis, G. Sassi and M. Sassi, Accredit. Qual. Assur. 18, 181 (2013). doi:10.1007/s00769-013-0974-y.
- K.-U. Goss, Crit. Rev. Environ. Sci. Technol. 34, 339 (2004). doi:10.1080/10643380490443263.
- J.C. Little, A.T. Hodgson and A.J. Gadgil, Atmos. Environ. 28, 227 (1994). doi:10.1016/1352-2310(94)90097-3.
- B. Ruggeri and G. Sassi, Chem. Eng. Commun. 122, 1 (1993). doi:10.1080/00986449308936148.
- Joint Committee for Guides in Metrology, JCGM, GUM 1995 with minor corrections, Evaluation of measurement data – Guide to the expression of uncertainty in measurement. 100 (2008). <http://www.bipm.org/en/publications/guides/#gum>.
- J.D. Wright, J.P. Kayl, A.N. Johnson and G.M. Kline, NIST Special Publication. 250–280, (2009). <http://www.nist.gov/calibrations/upload/sp250-80-2.pdf>.
- Dupont, Technical Information Bulletin H-88495. <http://www.magnatexpumps.com/pdf/permeation_effects.pdf>.
- American Society for Testing and Materials, ASTM, Standard test methods for water vapor transmission of materials. E96 (1995).
- L.W. McKeen, Permeability Properties of Plastics and Elastomers, 3rd ed. (William Andrew, Norwich, 2011).
- I.S. Lupakov and Y.S. Kuz’michev, J. Nucl. Energy 19, 484 (1965).