References
- Boone D A, Burgess E. Automated fabrication of mobility aids: Clinical demonstrations of the UCL computer aided socket design system. J Prosthet Orthot 1989; 1: 187–190
- Brncick H. Computer automated design and computer aided manufacture. Phys Med Rehabil Clin North Am 2000; 11: 701–713
- Convery P, Buis A, Wilkie R, Sockalingham S, Blair A, McHugh B. Measurement of the consistency of patellar-tendon-bearing cast rectification. Prosthet Orthot Int 2003; 27: 207–213
- Hastings J A, Vannah W, Stand J A, Harning D M, Drvaric D M. Frequency content of prosthetic and orthotic shapes: A requirement for CAD/CAM digitizer performance. J Prosthet Orthot 1998; 10: 2–6
- He P, Xue K, Fan Y, Wang Y. Test of a vertical scan mode in 3-D imaging of residual limbs using ultrasound. J Rehabil Res Dev 1999; 36: 86–93
- Klasson B. Appreciation of prosthetic socket fitting principles from basic engineering priniciples. Internal manual, National Centre for Prosthetics and Orthotics. University of Strathclyde, Glasgow. 1995
- Lilja M, Oberg T. Volumetric determinations with CAD/CAM in prosthetics and orthotics: errors of measurement. J Rehabil Res Dev 1995; 32(2)141–148
- Lilja M, Oberg T. Proper time for definitive trans-tibial fitting. J Prosthet Orthot 1997; 9: 90–95
- McGarry T, McHugh B. Evaluation of a contemporary CAD/CAM system. Prosthet Orthot Int 2005; 29: 221–229
- McGarry T, McHugh B. Comparison of the results of four users of a contemporary CAD/CAM system. Prosthet Orthot Int 2007; 31(1)27–35
- Ross J. Winter. Computer aided design (CAD) in UK prosthetics. ISPO UK Newsletter 2003/4; 10–14
- Saunders C G, Bannon M, Sabiston R M, Panych L, Jenks S L, Wood I R, Raschke S. The CANFIT System: Shape management technology for prosthetic and orthotic applications. J Prosthet Orthot 1989; 1: 122–130
- Smith D G, Burgess E M. The use of CAD/CAM technology in prosthetics and orthotics-current clinical models and a view to the future. J Rehabil Res Dev 2001; 38(3)327–334
- Zheng Y P, Mak A FT, Leung A KL. State of the art methods for geometric and biomechanical assessments of residual limbs: A review. J Rehabil Res Dev 2001; 38(5)487–504