Advanced search
Publication Cover
Polymer-Plastics Technology and Engineering Volume 47, 2007 - Issue 1
Submit an article Journal homepage
63
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

Effect of the Injection Molding Process Conditions Over the Determination of Kt Curves for Plastic Parts

María Virginia Candal Universidad Simón Bolívar, Departamento de Mecánica, Sección de Polímeros, Sartenejas, Apartado, Caracas, VenezuelaCorrespondence[email protected]
,
Héctor Rojas Universidad Simón Bolívar, Departamento de Mecánica, Sección de Polímeros, Sartenejas, Caracas, Venezuela
&
Joyce Jiménez Universidad Simón Bolívar, Sartenejas
Pages 89-95 | Published online: 26 Dec 2007

REFERENCES

  • Anguita , R. Moldeo por Inyección. Parte 1a Teoría y Equipos , Editorial Blume : Spain , 1975 .
  • “Cómo se Procesan los Materiales Plásticos (I)” , Revista de Plásticos Modernos 1995 , 472 , 343 – 350 .
  • Berins , M. Plastics Engineering Handbook of the Society of the Platics Industry , Editorial Van Nostrand Reinhold : New York, USA , 1991 .
  • Johannaber , F. Injection Molding Machines. A User's Guide , Hanser : New York , USA , 1982 .
  • Reig , M. El ciclo productivo del moldeo por inyección de termoplásticos (I) . Revista de Plásticos Modernos 2000 , 80 ( 533 ), 527 – 531 .
  • Candal , M. ; Morales , R. ; González , O. Aplicación de herramientas CAE para la evaluación mecánica de estuches para discos compactos . Revista de la Facultad de Ingeniería de la Universidad Central de Venezuela 2004 , 19 ( 1 ), 37 – 47 .
  • Candal , M. Integración CAD/CAE/CAM/PR en la Optimización del Diseño de Productos Plásticos: Caso de estudio , Revista Ciencia e Ingeniería : ULA , 2005 .
  • Candal , M. ; Rojas , H. ; Jiménez , J. Determination of Kt Curves for plastic parts with a triangular stress concentrador . Polym. Plast. Technol. Eng. 2007 , 47 , 1 – 7 .
  • Serway , R. Física, Tomo II , McGraw Hill : Colombia , 1997 .
  • Halliday , D. ; Resnick , R. ; Krane , K. Física , Vol. 2 , Compañía Editorial Continental : Mexico , 1994 .
  • Spoormaker , J. ; Heidweiller , A. Failures Due to Stress Concentrations , SPÉs ANTEC Proceeding , San Francisco , 2002 , w/p .
  • Morales, R. ; Villarroel, S. ; Andrade, H. ; Rojas, H. Experimental Validation of a Simulation Software for Flat Specimens Injection Mold . SPÉs ANTEC Proceeding , 2001 , 3473 – 3477 .
  • Chiang , H. ; Himasekhar , N. ; Santhanam , K. ; Wang , K. Integrated simulation of fluid flow and heat transfer in injection molding for the prediction of shrinkage and warpage . J. Eng. Mater. Technol. 1993 , 115 ( 1 ), 37 – 42 .
  • Chang , T. ; Faison , E. A Study of the Effects of Process Conditions on the Shrinkage of Plastics Parts in Injection Molding by the Taguchi Method , SPÉs ANTEC Proceeding ( 2000 ), Orlando , w/p .
  • Velarde , D. ; Yeagley , M. Linear shrinkage differences in injection molded parts . Plast. Eng. 2000 , 60 – 66 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.