Injection-Compression Molded Part Shrinkage Uniformity Comparison between Semicrystalline and Amorphous Plastics

Han-Xiong Huang Lab for Micro Molding and Polymer Rheology, College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou, P.R. ChinaCorrespondence[email protected]

Kun Li Lab for Micro Molding and Polymer Rheology, College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou, P.R. China

Sha Li Lab for Micro Molding and Polymer Rheology, College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou, P.R. China

REFERENCES

Chen , S.C. ; Chen , Y.C. ; Peng , H.S. Simulation of injection-compression-molding process. II. Influence of process characteristics on part shrinkage . J. Appl. Polym. Sci. 2000 , 75 ( 13 ), 1640 – 1654 .
Google Scholar
Chen , C.M. ; Young , W.B. The effects of compression pressure on injection compression molding . Inter. Polym. Process. 2000 , 15 ( 2 ), 176 – 179 .
Google Scholar
Kang , S.N. ; Kim , J.S. ; Kim , H. Birefringence distribution in magneto-optical disk substrate fabricated by injection compression molding . Opt. Eng. 2000 , 39 ( 3 ), 689 – 694 .
Web of Science ®Google Scholar
Wu , Ch.H. ; Su , Y.L. Optimization of wedge-shaped parts for injection molding and injection compression molding . Inter. Commun. Heat Mass Transfer. 2003 , 30 ( 2 ), 215 – 224 .
Google Scholar
Kim , I.H. ; Park , S.J. ; Chung , S.T. ; Kwon , T.H. Numerical modeling of injection/compression molding for center-gated disk: Part I. Injection molding with viscoelastic compressible fluid model . Polym. Eng. Sci. 1999 , 39 ( 10 ), 1930 – 1942 .
Google Scholar
Lee , Y.B. ; Kwon , T.H. ; Yoon , K. Numerical prediction of residual stresses and birefringence in injection/compression molded center-gated disk. Part 1: Basic modeling and results for injection. Polym. Eng. Sci. 2002 , 42 ( 11 ), 2246 – 2272 .
Google Scholar
Young , W.B. Effect of process parameters on injection compression molding of pickup lens . Appl. Math. Modell. 2005 , 29 ( 10 ), 955 – 971 .
Google Scholar

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Injection-Compression Molded Part Shrinkage Uniformity Comparison between Semicrystalline and Amorphous Plastics

REFERENCES

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature

Injection-Compression Molded Part Shrinkage Uniformity Comparison between Semicrystalline and Amorphous Plastics

REFERENCES

Reprints and Corporate Permissions

Academic Permissions

Related research

To cite this article:

Download citation

Information for

Open access

Opportunities

Help and information

Keep up to date