The Effect of Process Conditions on the Fiber Orientation and Tribological Characteristics of Polyoxymethylene Composites

REFERENCES

• Huang , C.H. ; Tseng , C.I. Effect of interface modification between POM and PTFE on the properties of POM/PTFE composites . J. Appl. Polym. Sci. 2000 , 44 , 800 – 807 .
   Web of Science ®Google Scholar
• Hashemi , S. ; Gilbride , M.T. ; Hodgkinson , J. Mechanical property relationships in glass-filled polyoxymethylene . J. Mater. Sci. 1996 , 31 , 5017 – 5025 .
   Web of Science ®Google Scholar
• Palanivelu , K. ; Balakrishnan , S. ; Rengasamy , P. Thermoplastic polyurethane toughened polyacetal blends . Polymer Testing. 2000 , 19 , 75 – 83 .
   Web of Science ®Google Scholar
• Kastelic , J. ; Buckley , A. ; Hope , P. Hydrostatic extrusion of glass reinforced and unreinforced Celcon POM . Polym. Sci. Technol. 1983 , 22 , 175 – 191 .
   Google Scholar
• Hashemi , S. ; Elmes , P. ; Sandford , S. Hybrid effects on mechanical properties of polyoxymethylene . Polym. Eng. Sci. 1997 , 23 , 45 – 58 .
   Web of Science ®Google Scholar
• Sundararajan , S. and Shit , S.C. Studies on properties of poly olefins: Poly propylene copolymer (PPcp) blends with methylenes (POM) . Polym. Testing. 2001 , 20 , 313 – 316 .
   Web of Science ®Google Scholar
• Wilson , G.F. ; Keller , D.J. ; Eckstein , Y. Effects of molding parameters on the properties of short glass fiber-reinforced TPUs. Automotive Challenge and Plastics Response: Automotive Plastics. 1987, RETEC'87; Dearborn, MI, USA.
   Google Scholar
• Bright , P.F. ; Darlington , M.W. Factors influencing fibre orientation and mechanical properties in fibre reinforced thermoplastics injection moldings . Practical Rheology in Polymer Process Computers and Tensile Properties. PBT 61 Chemical Engineering International Conference , 1980 , Loughborough , England .
   Google Scholar
• Xavier , S.F. ; Tyagi , D. ; Misra , A. Influence of injection-molding parameters on the morphology and mechanical properties of glass fiber reinforced polypropylene composites . Polym. Compos. 1982 , 3 ( 2 ), 88 – 96 .
   Web of Science ®Google Scholar
• Barbosa , S.E. ; Kenny , J.M. Analysis of the relationship between processing conditions—fiber orientation—final properties in short fiber reinforced polypropylene . J. Reinfor. Plast. Compos. 1999 , 18 ( 5 ), 413 – 420 .
   Web of Science ®Google Scholar
• Delpy , U. ; Fischer , G. Effect of mold-filling conditions on fiber distribution in injection-molded disks and on the mechanical properties of such disks . Adv. Polym. Technol. 1985 , 5 ( 1 ), 19 – 26 .
   Google Scholar
• Gupta , M. ; Santhanam , N. ; Chiang , H.H. ; Himasekhar , K. ; Tushak , P. ; Wang , K.K. Prediction of fiber orientation and mechanical properties in short-fiber-reinforced injection-molded composites . The 3rd International Conference on Computer Aided Design in Composite Material Technology . 1992 , Newark , DE , USA .
   Google Scholar
• Damle , M. ; Mehta , S. ; Malloy , R. ; McCarthy , S.P. Effect of fiber orientation on the mechanical properties of injection molded part and a stereolitho graphy-insert molded part . Proceedings of the 56th Annual Technical Conference , 1998 , Atlanta , GA , USA .
   Google Scholar
• Gennaro , A. Glass reinforced polyamide injection moulded: fibre orientation effects on properties . Plastic Rubber Proc. Appl. 1988 , 9 ( 4 ), 241 – 250 .
   Google Scholar
• Lumini , F. ; Pavan , A. Short fibre composite materials: relationship between fibre orientation and fracture toughness . Plastic Rubber Proc. Appl. 1998 , 27 ( 5 ), 240 – 246 .
   Web of Science ®Google Scholar
• Neves , N.M. ; Isdell , G. ; Pouzada , A.S. ; Powell , P.C. On the effect of the fiber orientation on the flexural stiffness of injection molded short fiberreinforced polycarbonate plates . Polym. Compos. 1998 , 19 ( 5 ), 640 – 651 .
   Web of Science ®Google Scholar
• Siegmann , A. ; Buchman , A. ; Kenig , S. Residual stress in polymers III: the influence of injection-molding processes conditions . Polym. Eng. Sci. 1982 , 22 , 560 – 568 .
   Web of Science ®Google Scholar
• Haskell III , W.E. ; Petrie , S.P. ; Lewis , R.W. Fracture toughness of a short-fiber-reinforced thermoplastic . Polym. Eng. Sci. 1983 , 23 , 771 – 775 .
   Web of Science ®Google Scholar
• Hollin , J. ; Miller , D. ; Vautour , D. Comparison of transverse properties of 50% short and long glass fiber-reinforced nylon 6/6 resin . J. Reinfor. Plastics Compos. 1998 , 17 ( 18 ), 1617 – 1624 .
   Web of Science ®Google Scholar
• Benabdallah , H. Friction and wear of blended polyoxymethylene sliding against coated steel plates . Wear 2003 , 254 , 1239 – 1246 .
   Web of Science ®Google Scholar
• Hu , X. Friction and wear behaviors of toughned polyoxymetrylene blend under water lubricanttion . Polym.-Plast. Technol. Eng. 2003 , 39 , 137 – 150 .
   Web of Science ®Google Scholar
• Tao , K.M. ; Xiang , D.H. Friction and wear behavior of POM filled with PTFE, glass fiber and graphite . Lubricat. Eng. 2006 , 9 , 103 – 105 .
   Google Scholar
• Chen , J. ; Cao , Y. ; Li , H. Investigation of the friction and wear behaviors of polyoxymethylene/linear low density polyethylene/ethylene-acrylic-acid blends . Wear 2006 , 260 , 1342 – 1348 .
   Web of Science ®Google Scholar
• Samyn , P. ; Baets , P.De. ; Schouken , G. ; Quintelier , J. Wear transition and stability of polyoxymethylene homopolymer in highly loaded applications compare to small-scale testing . Tribology 2007 , 40 , 819 – 833 .
   Web of Science ®Google Scholar
• Sun , L.H. ; Yang , Z.G. ; Li , X.H. Study on the friction and wear behavior of POM/Al2O3 nanocomposites . Wear 2007 , 264 , 693 – 700 .
   Web of Science ®Google Scholar
• Jeng , M.C. ; Fung , C.P. ; Li , T.C. The study on the tribological properties of fiber-reinforced PBT composites for various injection molding process parameters . Wear 2002 , 252 , 934 – 945 .
   Web of Science ®Google Scholar
• Ho , K.C. ; Jeng , M.C. Tribology characteristics of short glass fiber reinforced Polycarbon . Compos. Wear 1997 , 206 , 60 – 68 .
   Web of Science ®Google Scholar