Effects of Microstructural Changes by Injection Velocity Variations on Conductivity in Polyaniline-Based Polymer Blends

REFERENCES

• Arafa , I.M. ; Fares , M.M. ; Obeidat , A. ; El-Ghanem , H. Two-dimensional texture of intrinsic conductive poly(styrene-co-maleanilic acid) grafted with polyaniline: Formation and conductivity . Int. J. Polym. Mater. 2011 , 60 ( 9 ), 620 – 640 .
   Web of Science ®Google Scholar
• Kolaei , Z.T. ; Eisazadeh , H. Investigation of the Effect of DOP on polyaniline and polyaniline/poystyrene nanocomposites . Polym. Plast. Tech. Eng. 2011 , 50 ( 14 ), 1438 – 1442 .
   Web of Science ®Google Scholar
• Kim , S. ; Chung , I.J. Annealing effect on the electrochemical property of polyaniline complexed with various acids . Synth. Met. 1998 , 97 ( 2 ), 127 – 133 .
   Web of Science ®Google Scholar
• Domenech , S.C. ; Bortoluzzi , J.H. ; Soldi , V. ; Franco , C.V. Electroactive mixtures of polyaniline and EPDM rubber: Chemical, thermal, and morphological characterization . J. Appl. Polym. Sci. 2003 , 87 ( 3 ), 535 – 547 .
   Web of Science ®Google Scholar
• Jeevananda , T. ; Siddaramaiah . Synthesis and characterization of ethylene vinyl-acetate/polyaniline blends prepared by emulsion polymerization technique . Polym. Eng. Sci. 2003 , 43 ( 5 ), 1138 – 1150 .
   Web of Science ®Google Scholar
• Titelman , G.I. ; Zilberman , M. ; Siegmann , A. ; Haba , Y. ; Narkis , M. Thermal dynamic processing of polyaniline with dodecylbenzene sulfonic acid . J. Appl. Polym. Sci. 1997 , 66 ( 12 ), 2199 – 2208 .
   Web of Science ®Google Scholar
• Virtanen , E. ; Laakso , J. ; Ruohonen , H. ; Väkiparta , K. ; Järvinen , H. ; Jussila , M. ; Passiniemi , P. ; Österholm , J.-E. Electrically conductive compositions based on processible polyanilines—PANEPOLTM . Synth. Met. 1997 , 84 ( 1–3 ), 113 – 114 .
   Web of Science ®Google Scholar
• Ikkala , O.T. ; Laakso , J. ; Väkiparta , K. ; Virtanen , E. ; Ruohonen , H. ; Järvinen , H. ; Taka , T. ; Passiniemi , P. ; Österholm , J.-E. ; Cao , Y. ; Andreatta , A. ; Smith , P. ; Heeger , A.J. Counter-ion induced processibility of polyaniline: Conducting melt processible polymer blends . Synth. Met. 1995 , 69 ( 1–3 ), 97 – 100 .
   Web of Science ®Google Scholar
• Lundberg , B. ; Sundqvist , B. Resistivity of a composite conducting polymer as a function of temperature, pressure, and environment: applications as a pressure and gas concentration transducer . J. Appl. Phys. 1986 , 60 ( 3 ), 1074 – 1079 .
   Web of Science ®Google Scholar
• Lee , J. ; Kim , E. Effect of structural and morphological changes on the conductivity of stretched PANI-DBSA/HIPS film . Bull. Korean Chem. Soc. 2011 , 32 ( 8 ), 2661 – 2666 .
   Web of Science ®Google Scholar
• Hong , C.M. ; Kim , J. ; Jana , S.C. Shear-induced migration of conductive fillers in injection molding . Polym. Eng. Sci. 2004 , 44 ( 11 ), 2101 – 2019 .
   Web of Science ®Google Scholar
• Lin , C.C. Influence of injection velocity and joint geometry on quality of insert molding . Polym. Eng. Sci. (Online Published 3 August, 2011) doi: 10. 1002/pen. 22080 .
   Google Scholar
• Chan , H.S. ; Leng , Y. ; Gao , F. Processing of PC/LCP in situ composites by closed-loop injection molding . Compos. Sci. Tech. 2002 , 62 ( 6 ), 757 – 765 .
   Web of Science ®Google Scholar
• Gao , C.Y. ; Zhou , N.Q. ; Peng , X.F. ; Zhang , P. Optimized polystyrene cell morphology by orthogonal superposition of oscillatory shear . Polym. Plast. Tech. Eng. 2006 , 45 , 1025 – 1029 .
   Web of Science ®Google Scholar
• MacDiarmid , A.G. ; Epstein , A.J. The concept of secondary doping as applied to polyaniline. Synth. Met. 1994, 65 (2–3), 103–116.
   Web of Science ®Google Scholar
• Xia , Y. ; Wiesinger , J.M. ; MacDiarmid , A.G. ; Epstein , A.J. Camphorsulfonic acid fully doped polyaniline emeraldine salt: Conformations in different solvents studied by an ultraviolet/visible/near-infrared spectroscopic method . Chem. Mater. 1995 , 7 ( 3 ), 443 – 445 .
   Web of Science ®Google Scholar
• MacDiarmid , A.G. ; Epstein , A.J. Secondary doping in polyaniline . Synth. Met. 1995 , 69 ( 1–3 ), 85 – 92 .
   Web of Science ®Google Scholar
• Li , Z. ; Narh , K.A. Morphological development during injection molding of self-reinforcing composites II: Numerical simulations and analytical predictions . Polym. Compos. 2000 , 21 ( 6 ), 978 – 987 .
   Web of Science ®Google Scholar
• Ghosh , S. ; Viana , J.C. ; Reis , R.L. ; Mano , J.F. Oriented morphology and enhanced mechanical properties of poly(L-lactic acid) from shear controlled orientation in injection molding . Mat. Sci. Eng. A 2008 , 490 ( 1–2 ), 81 – 89 .
   Web of Science ®Google Scholar
• De Souza , J.P. ; Baird , D.G. In situ composites based on blends of a polyetherimide and thermotropic liquid crystalline polymers subjected to shear free deformations . Polym. Compos. 1996 , 17 ( 4 ), 578 – 595 .
   Web of Science ®Google Scholar
• Shokri , P. ; Bhatnagar , N. Effect of packing pressure on fiber orientation in injection molding of fiber-reinforced thermoplastics . Polym. Compos. 2007 , 28 ( 2 ), 214 – 223 .
   Web of Science ®Google Scholar
• Lee , J.J. ; Cha , S.W. Characteristics of the skin layers of microcellular injection molded parts . Polym. Plast. Tech. Eng. 2006 , 45 , 871 – 877 .
   Web of Science ®Google Scholar
• SadAbdi , H. Ghasemi , M. Study on fiber weight fraction effect on Tensile Modulus of Polystyrene (PS) composites reinforced with short glass fiber (SGF) based on their fiber orientation . Polym. Plast. Tech. Eng. 2008 , 47 , 427 – 432 .
   Web of Science ®Google Scholar
• Healy , J. ; Edward , G.H. ; Knott , R.B. Residual orientation in injection micro-molded samples . Physica B 2006 , 385–386 , 620 – 622 .
   Web of Science ®Google Scholar
• Hwang , H.Y. ; Lee , S.W. ; Kim , I.W. ; Lee , H.S. Anisotropy in conductivity of stretched polyaniline film . Synth. Met. 1995 , 69 ( 1–3 ), 225 – 226 .
   Web of Science ®Google Scholar
• Tang , J. ; Jing , X. ; Wang , B. ; Wang , F. Infrared spectra of soluble polyaniline . Synth. Met. 1988 , 24 ( 3 ), 231 – 238 .
   Web of Science ®Google Scholar
• Ruckenstein , E. ; Yang , S. An emulsion pathway to electrically conductive polyaniline-polystyrene composites . Synth. Met. 1993 , 53 ( 3 ), 28 – 292 .
   Google Scholar
• Nara , S. ; Komiya , T. Studies on the relationship between water-satured state and crystallinity by the diffraction method for moistened potato starch . Starch-Stärke 1983 , 35 ( 12 ), 407 – 410 .
   Web of Science ®Google Scholar
• Wang , S. ; Yu , J. ; Gao , W. Use of x-ray diffractometry (XRD) for identification of fritillaria according to geographical origin . W. Am. J. Biochem. Biotech. 2005 , 1 ( 4 ), 199 – 203 .
   Google Scholar
• Maier , C. ; Calafut , T. Polypropylene: The definitive user's guide and databook. New York, Plastics Design Library, 1998.
   Google Scholar
• Dani , A. ; Ogale , A.A. Electrical percolation behavior of short-fiber composites: Experimental characterization and modeling . Compos. Sci. Tech. 1996 , 56 ( 8 ), 911 – 920 .
   Web of Science ®Google Scholar
• Monkman , A.P. ; Adams , P. Optical and electronic properties of stretch-oriented solution-cast polyaniline films . Synth. Met. 1991 , 40 ( 1 ), 87 – 96 .
   Web of Science ®Google Scholar
• Monkman , A.P. ; Adams , P. Observed anisotropies in stretch oriented polyaniline . Synth. Met. 1991 , 41 ( 1–2 ), 627 – 633 .
   Web of Science ®Google Scholar