Method Development to Evaluate Melting Behavior of Glass Fiber-Reinforced Syndiotactic Polystyrene Composites in the Presence of Pressure Loading

REFERENCES

• Malloy , R.A. Plastic Part Design for Injection Molding , Hanser Publishers : New York , 1994 .
   Google Scholar
• Rosato , D.V. ; Rosato , M.G. Injection Moulding Handbook, , 3rd Ed. , Kluwer Academic Publishers : Boston , 2003 .
   Google Scholar
• Hwang , D.K. ; Lee , H.S. ; Kim , H.J. ; Shul , Y.G. ; Oh , K. Crystallization of polycarbonate in solvent/nonsolvent system and its application to high-density polyethylene composite as a filler . Polym. Eng. Sci. in press , doi: 10.1002/pen.23740
   Google Scholar
• Sorrentino , A. ; Pantani , R. Injection molding of syndiotactic polystyrene/clay nanocomposites . Polym. Eng. Sci. 2006 , 46 , 1768 – 1777 .
   Web of Science ®Google Scholar
• Hwang , S.H. ; Kim , Y.S. ; Cha , H.C. ; Jung , J.C. Thermal and physical properties of poly(phenylene oxide) blends with glass fiber reinforced syndiotactic polystyrene . Polymer 1999 , 40 , 5957 – 5960 .
   Web of Science ®Google Scholar
• Hemmati , M. ; Fereidoon , A. ; Shariatpanahi , H. ; Ahangari , M.G. ; Narimani , A. Effects of nanoclay on morphology, rheological, and mechanical properties of polyvinyl chloride/acrylonitrile-butadiene-styrene . Polym. Plast. Technol. Eng. 2012 , 51 , 413 – 418 .
   Web of Science ®Google Scholar
• Li , L. ; Song , G. ; Tang , G. Morphology, crystallization and dynamical mechanical behavior of iiP/nano-CaCO3 composites . Polym. Plast. Technol. Eng. 2012 , 51 , 1083 – 1089 .
   Web of Science ®Google Scholar
• Khosravi , R. ; Hashemi , S.A. ; Sabet , S.A. ; Rezadoust , A.M. Thermal, dynamic mechanical, and barrier studies of potassium permanganate-LDPE nanocomposites . Polym. Plast. Technol. Eng. 2013 , 52 , 126 – 132 .
   Web of Science ®Google Scholar
• Xu , X. ; Sach , E. ; Allen , S. The design of conformal cooling channels in injection molding tooling . Polym. Eng. Sci. 2001 , 4 ( 1 ), 1269 – 1272 .
   Google Scholar
• Saifullah , A.B.M. ; Masood , S.H. Optimum cooling channels design and thermal analysis of an Injection moulded plastic part mould . Mater. Sci. Forum 2007 , 561–565 , 1999 – 2002 .
   Google Scholar
• Lawrence , S.S.T. ; Shinozaki , D.M. Crystallization of syndiotactic polystyrene . Polym. Eng. Sci. 2004 , 37 , 1825 – 1832 .
   Google Scholar
• Cimmino , S. ; Di Pace , E. ; Martuscelli , E. ; Silvestre , C. Syndiotactic polystyrene-based blends: Crystallization and phase structure . Polymer 1993 , 34 ( 13 ), 2799 – 2803 .
   Web of Science ®Google Scholar
• Sudduth , R.D. ; Yarala , P.K. A comparison of induction time and crystallization rate for syndiotactic polystyrene . Polym. Eng. Sci. 2004 , 42 , 694 – 706 .
   Web of Science ®Google Scholar
• Chen , Q. ; Yu , Y. ; Na , T. ; Zhang , H. ; Mo , Z. Isothermal and nonisothermal melt-crystallization kinetics of syndiotactic polystyrene . J. Appl. Polym. Sci. 2002 , 83 , 2528 – 2538 .
   Web of Science ®Google Scholar
• Lu , H. ; Nutt , S. Cold-crystallization kinetics of syndiotactic polystyrene . J. Appl. Polym. Sci. 2003 , 89 , 3464 – 3470 .
   Web of Science ®Google Scholar
• Guerra , G. ; De Rosa , C. ; Vitagliano , V.M. ; Petraccone , V. ; Corradini , P. Effects of blending on the polymorphic behavior of melt-crystallized syndiotactic polystyrene . J. Polym. Sci. Pt. A: Polym. Phys. 1991 , 29 , 265 – 271 .
   Web of Science ®Google Scholar
• Hong , B.K. ; Jo , W.H. ; Lee , S.C. ; Kim , J. Correlation between melting behavior and polymorphism of syndiotactic polystyrene and its blend with poly(2,6-dimethyl-1,4-phenylene oxide) . Polymer 1998 , 39 , 1793 – 1797 .
   Web of Science ®Google Scholar
• Toda , A. ; Oda , T. ; Hikosaka , M. ; Saruyama , Y. A new method of analyzing transformation kinetics with temperature modulated differential scanning calorimetry: Application to polymer crystal growth. Polymer 1997, 38, 231–233.
   Web of Science ®Google Scholar
• Toda , A. ; Taguchi , K. ; Kajioka , H. Structural evolution in directional crystallization of polymers under temperature gradient . Macromolecules 2011 , 45 , 852 – 861 .
   Web of Science ®Google Scholar
• Krzystowczyk , D.H. ; Niu , X. ; Wesson , R.D. ; Collier , J.R. A technique to measure the crystallinity of syndiotactic polystyrene using thermal analyses . Polym. Bull. 1994 , 33 , 109 – 111 .
   Web of Science ®Google Scholar
• Dutt , K. ; Soni , R.K. ; Singh , H. Thermal stability and crystallization behavior of TER blends of isotactaic polypropylene(iPP)/ethylene-propylene diene rubber(EPDM)/nitrile rubber(NBR) . Int. J. Polym. Mater. 2012 , 61 , 864 – 881 .
   Web of Science ®Google Scholar
• Wang , B. ; Zhao , X. ; Wang , L. Isothermal crystallization and melting behaviors of biodegradable poly(latic acid)/poly(Butylene adipate-co-terephthalate) blends compatibilized by transesterification . Polym. Plast. Technol. Eng. 2013 , 52 , 718 – 716 .
   Web of Science ®Google Scholar
• Mackley , M.R. ; Spitteler , P.H.J. Experimental observations on the pressure-dependent polymer melt rheology of linear low density polyethylene, using a multi-pass rheometer . Rheo. Acta 1996 , 35 , 202 – 209 .
   Web of Science ®Google Scholar
• Aho , J. Rheological characterization of polymer melts in shear and extension: Measurement reliability and data for practical processing. Dissertation, Tampere University of Technology, Finland, 2011.
   Google Scholar
• Woo , E.M. ; Sun , Y.S. ; Yang , C.P. Polymorphism, thermal behavior, and crystal stability in syndiotactic polystyrene vs. its miscible blends . Prog. Polym. Sci. 2001 , 26 , 945 – 983 .
   Web of Science ®Google Scholar
• Bumm , S.H. ; White , J.L. ; Isayev , A.I. Glass fiber breakup in corotating twin screw extruder: Simulation and experiment . Polym. Compos. 2012 , 33 ( 12 ), 2147 – 2158 .
   Web of Science ®Google Scholar