Induced Hydrophilicity of the Nanoclay on the Pervaporation Performance of Cross-Linked Poly(vinyl alcohol) Nanocomposite Membranes

References

• Liu, K.; Fang, C.J.; Li, Z.Q.; Young, M. Separation of thiophene/n-heptane mixtures using PEBAX/PVDF-composited membranes via pervaporation. J. Membr. Sci. 2014, 451, 24–31.
   Web of Science ®Google Scholar
• Gupta, B.D.; Mukherjee, A.K. Separation of liquid mixtures by pervaporation. Polym. Plast. Technol. Eng. 1990, 29, 299–337.
   Google Scholar
• Johnson, T.; Thomas, S. Sorption, diffusion, and permeation of chlorinated hydrocarbon vapors through natural rubber, epoxidized natural rubber, and their blends. Polym. Plast. Technol. Eng. 2000, 39, 363–380.
   Web of Science ®Google Scholar
• Wang, F.C.; Zhang, Z.H.; Sun, Y.J.; Liu, Y.; Hu, Z.Y.; Wang, H.; Korznikov, A.V.; Korznikova, E.; Liu, Z.F.; Osamu, S. Rapid and low temperature spark plasma sintering synthesis of novel carbon nanotube reinforced titanium matrix composites. Carbon 2015, 95, 396–407.
   Web of Science ®Google Scholar
• Hassan, M.; Reddy, K.R.; Haque, E.; Minett, A.I.; Gomes, V.G. High-yield aqueous phase exfoliation of graphene for facile nanocomposite synthesis via emulsion polymerization. J. Colloid Interface Sci. 2013, 410, 43–51.
   PubMed Web of Science ®Google Scholar
• Reddy, K.R.; Sin, B.C.; Ryu, K.S.; Kim, J.C.; Chung, H.; Lee, Y. Conducting polymer functionalized multi-walled carbon nanotubes with noble metal nanoparticles: Synthesis, morphological characteristics and electrical properties. Synth. Met. 2009, 159, 595–603.
   Web of Science ®Google Scholar
• Punja, M. Encyclopaedia of Toxicology, 3rd ed., Elsevier Inc.: Amsterdam, The Netherlands, 2014, p. 1144.
   Google Scholar
• Yu, C.; Liu, Y.; Chen, G.; Gu, X.; Xing, W. Pre-treatment of isopropanol solution from pharmaceutical industry and pervaporation dehydration by NaA zeolite membranes. Chin. J. Chem. Eng. 2011, 19, 904–910.
   Web of Science ®Google Scholar
• Lang, W.Z.; Tong, W.; Xu, Z.L. Preparation of PFSA-PVA/PSf hollow fibre membrane for IPA/H2O pervaporation process. J. Appl. Polym. Sci. 2008, 108, 370–379.
   Web of Science ®Google Scholar
• Koch, K.; Gorak, A. Pervaporation of binary and ternary mixtures of acetone, isopropyl alcohol and water using polymeric membranes: Experimental characterisation and modelling. Chem. Eng. Sci. 2014, 115, 95–114.
   Web of Science ®Google Scholar
• Xie, Z.; Hoang, M.; Ng, D.; Doherty, C.; Hill, A.; Gray, S. Effect of heat treatment on pervaporation separation of aqueous salt solution using hybrid PVA/MA/TEOS membrane. Sep. Purif. Technol. 2014, 127, 10–17.
   Web of Science ®Google Scholar
• Gozzelino, G. Pervaporation of methanol/methyl-t-butyl ether mixtures through poly(vinyl alcohol)/poly(acrylic acid) blend membranes. Sep. Sci. Technol. 2005, 40, 2265–2276.
   Web of Science ®Google Scholar
• Ursache, O.; Gaina, V.; Gaina, C. Poly(vinyl alcohol)-inorganic hybrid materials with thermocleavable groups. Polym. Plast. Technol. Eng. 2013, 52, 546–552.
   Web of Science ®Google Scholar
• Gaina, C.; Ursache, O.; Gaina, V.; Ionita, D. Study on the chemical modification of poly(vinyl alcohol) with 4-maleimidophenyl isocyanate. Polym. Plast. Technol. Eng. 2012, 51, 65–70.
   Web of Science ®Google Scholar
• Figueiredo, K.C.S.; Alves, T.L.M.; Borges, C.P. Poly(vinyl alcohol) films crosslinked by glutaraldehyde under mild conditions. J. Appl. Polym. Sci. 2009, 111, 3074–3080.
   Web of Science ®Google Scholar
• Gilman, J.W. Flammability and thermal stability of polymer layered – silicate (clay) nanocomposites. Appl. Clay. Sci. 1999, 15, 35–41.
   Web of Science ®Google Scholar
• Sengwa, R.J.; Choudhary, S.; Sankhla, S. Dielectric properties of montmorillonite clay filled poly(vinyl alcohol)/poly(ethylene oxide) blend nanocomposites. Compos. Sci. Technol. 2010, 70, 1621–1627.
   Web of Science ®Google Scholar
• Irani, M.; Keshtkar, A.R.; Mousavian, M.A. Removal of Cd(II) and Ni(II) from aqueous solution by PVA/TEOS/TMPTMS hybrid membrane. Chem. Eng. J. 2011, 175, 251–259.
   Web of Science ®Google Scholar
• Lu, H.; Ma, Y.; Wu, H.; He, H.; Zhao, D. Flammability performance and char behavior of poly(vinyl alcohol)-zirconium phosphate-montmorillonite composites. Polym. Plast. Technol. Eng. 2013, 52, 827–832.
   Web of Science ®Google Scholar
• Li, W.; Li, X.; Chen, Y.; Li, X.; Deng, H.; Wang, T.; Huang, R.; Fan, G. Poly(vinyl alcohol)/sodium alginate/layered silicate based nanofibrous mats for bacterial inhibition. Carbohydr. Polym. 2013, 92, 2232–2238.
   PubMed Web of Science ®Google Scholar
• Strawhecker, K.E.; Manias, E. Structure and properties of poly(vinyl alcohol)/Na+ montmorillonite nanocomposite. Chem. Mater. 2000, 10, 2943–2949.
   Web of Science ®Google Scholar
• Bandi, S.; Schiraldi, D.A. Glass transition behaviour of clay aerogel/poly(vinyl alcohol) composites. Macromolecules 2006, 39, 6537–6545.
   Web of Science ®Google Scholar
• Silva, S.M.L.; Araujo, P.E.R.; Ferreira, K.M.; Canedo, E.L.; Carvalho, L.H.; Raposo, C.M.O. Effect of clay/water ratio during bentonite clay organophilization on the characteristics of the organobentonites and its polypropylene nanocomposites. Polym. Eng. Sci. 2009, 49, 1696–1702.
   Web of Science ®Google Scholar
• Ollier, R.P.; Perez, C.J.; Alvarez, V.A. Preparation and characterization of micro and nanocomposites based on poly(vinyl alcohol) for packaging applications. J. Mater. Sci. 2013, 48, 7088–7096.
   Web of Science ®Google Scholar
• Ramos Filho, F.G.; Melo, T.J.A.; Rabello, M.S.; Silva, S.M.L. Thermal stability of nanocomposites based on polypropylene and bentonite. Polym. Degrad. Stab. 2005, 89, 383–392.
   Web of Science ®Google Scholar
• Santiago, F.; Mucientes, A.E.; Osorio, M.; Rivera, C. Preparation of composites and nanocomposites based on bentonite and poly (sodium acrylate); Effect of amount of bentonite on the swelling behaviour. Eur. Polym. J. 2007, 43, 1–9.
   Web of Science ®Google Scholar
• Jose, T; George, S.C.; Maya, M.G.; Maria, H.J.; Wilson, R.; Thomas, S. Effect of bentonite clay on the mechanical, thermal, and pervaporation performance of the poly(vinyl alcohol) nanocomposite membranes. Ind. Eng. Chem. Res. 2014, 53, 16820–16831.
   Web of Science ®Google Scholar
• Lee, Y.M.; Nam, S.Y.; Ha, S.Y. Pervaporation of water/isopropanol mixtures through polyaniline membranes doped with poly (acrylic acid). J. Membr. Sci. 1999, 159, 41–46.
   Web of Science ®Google Scholar
• Han, Y.J.; Wang, K.H.; Lai, J.Y.; Liu, Y.L. Hydrophilic chitosan-modified polybenzimidazole membranes for pervaporation dehydration of isopropanol aqueous solutions. J. Membr. Sci. 2014, 463, 17–23.
   Web of Science ®Google Scholar
• Anjali Devi, D.; Smitha, B.; Sridhar, S.; Aminabhavi, T.M. Pervaporation separation of isopropanol/water mixtures through crosslinked chitosan membranes. J. Membr. Sci. 2005, 262, 91–99.
   Web of Science ®Google Scholar
• Khosravi, T.; Mosleh, S.; Bakhtiari, O.; Mohammadi, T. Mixed matrix membranes of Matrimid 5218 loaded with zeolite 4A for pervaporation separation of water–isopropanol mixtures. Chem. Eng. Res. Des. 2012, 90, 2353–2363.
   Web of Science ®Google Scholar
• George, S.C.; Prasad, K.; Misra, J.P.; Thomas, S.J. Separation of alkane–acetone mixtures using styrene–butadiene rubber/natural rubber blend membranes. Appl. Polym. Sci. 1999, 74, 3059–3068.
   Web of Science ®Google Scholar
• Baker, R.W.; Wijmans, J.G.; Huang, Y. Permeability, permeance and selectivity: A preferred way of reporting pervaporation performance data. J. Membr. Sci. 2010, 348, 346–352.
   Web of Science ®Google Scholar
• Peng, F.; Lu, L.; Sun, H.; Jiang, Z. Analysis of annealing effect on pervaporation properties of PVA-GPTMS hybrid membranes through PALS. J. Membr. Sci. 2006, 281, 600–608.
   Web of Science ®Google Scholar
• Zhang, Q.G.; Liu, Q.L.; Jiang, Z.Y.; Chen, Y. Anti-trade-off in dehydration of ethanol by novel PVA/APTEOS hybrid membranes. J. Membr. Sci. 2007, 287, 237–245.
   Web of Science ®Google Scholar
• Villaluenga, J.P.G.; Godino, P.; Khayet, M.; Seoane, B.; Mengual, J.I. Pervaporation of alcohols and methyl tert-butyl ether through a dense poly(2,6-dimethyl-1,4-phenylene oxide) membrane. Ind. Eng. Chem. Res. 2004, 43, 2548–2555.
   Web of Science ®Google Scholar
• Bolto, B.; Tran, T.; Hoang, M.; Xie, Z. Crosslinked poly(vinyl alcohol) membranes. Prog. Polym. Sci. 2009, 34, 969–981.
   Web of Science ®Google Scholar
• Destaye, A.G.; Lin, C.K.; Lee, C.K. Glutaraldehyde vapor cross-linked nanofibrous PVA mat with in situ formed silver nanoparticles. ACS Appl. Mater. Interfaces 2013, 5, 4745–4752.
   PubMed Web of Science ®Google Scholar
• Beydaghi, H.; Javanbakht, M.; Badiei, A. Cross-linked poly(vinyl alcohol)/sulfonated nanoporous silica hybrid membranes for proton exchange membrane fuel cell. J. Nanostruct. Chem. 2014, 4, 97.
   Google Scholar
• Venkatathri, N. Characterization and catalytic properties of a naturally occurring clay, bentonite. Bull. Catal. Soc. India 2006, 5, 61–72.
   Google Scholar
• Reddy, K.R.; Lee, K.P.; Gopalan, A.I.; Kang, H.D. Organosilane modified magnetite nanoparticles/poly(aniline-co-o/m-aminobenzenesulfonic acid) composites: Synthesis and characterization. React. Funct. Polym. 2007, 67, 943–954.
   Web of Science ®Google Scholar
• Showkat, A.M.; Zhang, Y.P.; Kim, M.S.; Gopalan, A.I.; Reddy, K.R.; Lee, K.P. Analysis of heavy metal toxic ions by adsorption onto amino-functionalized ordered mesoporous silica. Bull. Korean Chem. Soc. 2007, 28, 1985–1992.
   Web of Science ®Google Scholar
• Mansur, H.S.; Orefice, R.L.; Mansur, A.A.P. Characterization of poly(vinyl alcohol) / poly(ethylene glycol) hydrogels and PVA-derived hybrids by small-angle X-ray scattering and FTIR spectroscopy. Polymer 2004, 45, 7193–7202.
   Web of Science ®Google Scholar
• Sapalidis, A.A.; Katsaros, F.K.; Kanellopoulos, N.K.; Demokritos, N.C.S.R. Institute of physical chemistry. In: Cuppoletti, J. ed. Nanocomposites and Polymers with Analytical Methods, InTech, E-publishing: The Netherlands, 2011, p. 29.
   Google Scholar
• Liu, J.; Boo, W.J.; Clearfield, A.; Sue, H.J. Intercalation and exfoliation: A review on morphology of polymer nanocomposites reinforced by inorganic layer structures mater. Manuf. Process 2006, 20, 143–151.
   Web of Science ®Google Scholar
• Fornes, T.D.; Paul, D.R. Modeling properties of nylon 6/clay nanocomposites using composite theories. Polymer 2003, 44, 4993–5013.
   Web of Science ®Google Scholar
• Othman, N.; Azahari, N.A.; Ismail, H. Thermal properties of polyvinyl alcohol (PVOH)/corn starch blend film. Malaysian. Polym. J. 2011, 6, 147–154.
   Google Scholar
• Zhang, Q.G.; Liu, Q.L.; Shi, F.F.; Xiong, Y. Structure and permeation of organic–inorganic hybrid membranes composed of poly(vinyl alcohol) and polysilsesquioxane. J. Mater. Chem. 2008, 18, 4646–4653.
   Web of Science ®Google Scholar
• Chen, S.H.; Liou, R.M.; Shih, C.Y.; Lai, C.L.; Lai, J.Y. Pervaporation separation of water/ethanol mixture using asymmetric ion-exchange membranes containing aluminum ions. J. Appl. Polym. Sci. 2007, 106, 1412–1420.
   Web of Science ®Google Scholar
• George, S.C.; Ninan, K.N.; Thomas, S. Pervaporation separation of chlorinated hydrocarbon and acetone mixtures with crosslinked styrene-butadiene rubber and natural rubber blend membranes. J. Membr. Sci. 2000, 176, 131–142.
   Web of Science ®Google Scholar
• Kulkarni, S.S.; Kittur, A.A.; Aralaguppi, M.I.; Kariduraganavar, M.Y. Synthesis and characterization of hybrid membranes using poly(vinyl alcohol) and tetraethyl orthosilicate for the pervaporation separation of water–isopropanol mixtures. J. Appl. Polym. Sci. 2004, 94, 1304–1315.
   Web of Science ®Google Scholar
• Choi, J.H.; Jegal, J.; Kim, W.N.; Choi, H.S. Incorporation of multi walled carbon nanotubes into poly(vinyl alcohol) membranes for use in the pervaporation of water/ethanol mixtures. J. Appl. Polym. Sci. 2009, 111, 2186–2193.
   Web of Science ®Google Scholar
• Albo, J.; Wang, J.; Tsuru, T. Application of interfacially polymerized polyamide composite membranes to isopropanol dehydration: Effect of membrane pre-treatment and temperature. J. Membr. Sci. 2014, 453, 384–393.
   Web of Science ®Google Scholar
• Xie, Z.; Hoang, M.; Duong, T.; Ng, D.; Dao, B.; Gray, S. Sol–gel derived poly(vinyl alcohol) / maleic acid / silica hybrid membrane for desalination by pervaporation. J. Membr. Sci. 2011, 383, 96–103.
   Web of Science ®Google Scholar
• Teli, S.B.; Gokavi, G.S.; Sairam, M.; Aminabhavi, T.M. Mixed matrix membranes of poly(vinyl alcohol) loaded with phosphomolybdic heteropoly acid for the pervaporation separation of water–isopropanol mixtures. Colloids Surf. A Physicochem. Eng. Aspects 2007, 301, 55–62.
   Web of Science ®Google Scholar
• Sajjan, A.M.; Jeevan Kumar, B.K.; Kittur, A.A.; Kariduraganavar, M.Y. Development of novel grafted hybrid PVA membranes using glycidyl trimethyl ammonium chloride for pervaporation separation of water–isopropanol mixtures. J. Ind. Eng. Chem. 2013, 19, 427–437.
   Web of Science ®Google Scholar
• Suhas, D.P.; Aminabhavi, T.M.; Raghu, A.V. Para-toluene sulfonic acid treated clay loaded sodium alginate membranes for enhanced pervaporative dehydration of isopropanol. Appl. Clay Sci. 2014, 101, 419–429.
   Web of Science ®Google Scholar
• Prasad, C.V.; Yeriswamy, B.; Sudhakar, H.; Sudhakara, P.; Subha, M.C.S.; Song, J.I.; Rao, K.C. Preparation and characterization of nanoparticle-filled, mixed-matrix membranes for the pervaporation dehydration of isopropyl alcohol. J. Appl. Polym. Sci. 2012, 125, 3351–3360.
   Web of Science ®Google Scholar
• Adoor, S.G.; Sairam, M.; Lata, S.; Manjeshwar, L.S.; Raju, K.V.S.N.; Aminabhavi, T.M. Sodium montmorillonite clay loaded novel mixed matrix membranes of poly(vinyl alcohol) for pervaporation dehydration of aqueous mixtures of isopropanol and 1,4-dioxane. J. Membr. Sci. 2006, 285, 182–195.
   Web of Science ®Google Scholar
• Kurkuri, M.D.; Toti, U.S.; Aminabhavi, T.M. Synthesis and characterization of blend membranes of sodium alginate and poly(vinyl alcohol) for pervaporation separation of water–isopropanol mixtures. J. Appl. Polym. Sci. 2002, 86, 3642.
   Web of Science ®Google Scholar